{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "annular-snap-fit-caps",
 "name": "3D printable annular snap-fit caps and containers: push-on lid with bead and groove, 20–50 mm (STL, STEP)",
 "kind": "hardware",
 "category": "3D printing",
 "group": "Snap fits & clips",
 "year": null,
 "question": "How do I design a 3D printed lid that snaps onto a round container?",
 "tags": [
  "annular snap fit",
  "snap lid",
  "snap cap",
  "push on lid",
  "container",
  "3d printed lid",
  "bead and groove",
  "stl",
  "step"
 ],
 "aliases": [
  "3d printable snap lid",
  "snap on cap stl",
  "annular snap fit cad",
  "push fit lid 3d print",
  "snap cap container"
 ],
 "overall_mm": {
  "length": 51.4,
  "width": 51.4,
  "height": 38
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 8,
 "url": "https://xemstudio.com/objects/annular-snap-fit-caps/",
 "sheet_txt": "https://xemstudio.com/objects/annular-snap-fit-caps/sheet.txt",
 "sheet": {
  "basis": "Annular snap joint per the Bayer snap-fit design guide; bead about 1.5–2 % of the diameter. Xem design, zero clearance.",
  "overall_mm": {
   "length": 51.4,
   "width": 51.4,
   "height": 38
  },
  "notes": [
   "Base: cup with 2 mm wall and 2 mm floor, rounded bead 3 mm below the rim.",
   "Lid: 6 mm skirt with a matching inside groove, 2 mm top.",
   "Print both open side up. Add 0.1–0.15 mm radial clearance for FDM."
  ],
  "table": {
   "columns": [
    "file",
    "neck D mm",
    "bead mm",
    "overall mm"
   ],
   "rows": [
    [
     "snap-cap-base-d20",
     "20",
     "0.4",
     "20.8 × 20.8 × 20"
    ],
    [
     "snap-cap-lid-d20",
     "20",
     "0.4",
     "24 × 24 × 8"
    ],
    [
     "snap-cap-base-d30",
     "30",
     "0.5",
     "31 × 31 × 26"
    ],
    [
     "snap-cap-lid-d30",
     "30",
     "0.5",
     "34 × 34 × 8"
    ],
    [
     "snap-cap-base-d40",
     "40",
     "0.6",
     "41.2 × 41.2 × 32"
    ],
    [
     "snap-cap-lid-d40",
     "40",
     "0.6",
     "44 × 44 × 8"
    ],
    [
     "snap-cap-base-d50",
     "50",
     "0.7",
     "51.4 × 51.4 × 38"
    ],
    [
     "snap-cap-lid-d50",
     "50",
     "0.7",
     "54 × 54 × 8"
    ]
   ]
  }
 },
 "sheet_text": "3D printable annular snap-fit caps and containers: push-on lid with bead and groove, 20–50 mm (STL, STEP) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/annular-snap-fit-caps/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Annular snap joint per the Bayer snap-fit design guide; bead about 1.5–2 % of the diameter. Xem design, zero clearance.\nCatalog version: 2026-10-20\n\nOverall (mm): length 51.4, width 51.4, height 38.0\n- Base: cup with 2 mm wall and 2 mm floor, rounded bead 3 mm below the rim.\n- Lid: 6 mm skirt with a matching inside groove, 2 mm top.\n- Print both open side up. Add 0.1–0.15 mm radial clearance for FDM.\n\nfile  neck D mm  bead mm  overall mm\nsnap-cap-base-d20  20  0.4  20.8 × 20.8 × 20\nsnap-cap-lid-d20  20  0.4  24 × 24 × 8\nsnap-cap-base-d30  30  0.5  31 × 31 × 26\nsnap-cap-lid-d30  30  0.5  34 × 34 × 8\nsnap-cap-base-d40  40  0.6  41.2 × 41.2 × 32\nsnap-cap-lid-d40  40  0.6  44 × 44 × 8\nsnap-cap-base-d50  50  0.7  51.4 × 51.4 × 38\nsnap-cap-lid-d50  50  0.7  54 × 54 × 8\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Bayer MaterialScience: Snap-Fit Joints for Plastics: A Design Guide — web — Publisher's page; dimensions are facts — https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf\n- Fictiv: How to Design Snap Fit Components — web — Publisher's page; dimensions are facts — https://www.fictiv.com/articles/how-to-design-snap-fit-components\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 8 parts): https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/index.json\nAPI: https://xemstudio.com/api/geometry?object=annular-snap-fit-caps\n",
 "sources": [
  {
   "publisher": "Bayer MaterialScience",
   "title": "Snap-Fit Joints for Plastics: A Design Guide",
   "url": "https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Fictiv",
   "title": "How to Design Snap Fit Components",
   "url": "https://www.fictiv.com/articles/how-to-design-snap-fit-components",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "snap-fit-hooks-and-catches",
  "snap-fit-cantilever-joint",
  "living-hinge",
  "snap-tri-clamp-bolt-free"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "base bead",
   "exact": "D 20/30/40/50, bead 0.4/0.5/0.6/0.7 mm",
   "mates": "matching lid groove",
   "fit": "slide",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "How big should the bead be on a printed snap lid?",
   "a": "About 1.5–2% of the diameter: 0.4 mm at 20 mm up to 0.7 mm at 50 mm. Larger beads crack the lid."
  },
  {
   "q": "Why does my snap lid split?",
   "a": "The skirt must stretch over the bead. Keep the skirt wall thin (2 mm here) and print it with the layers running around the ring."
  },
  {
   "q": "Does an annular snap seal?",
   "a": "It holds well but is not watertight; add an O-ring or gasket for liquid."
  },
  {
   "q": "What clearance should I add?",
   "a": "These are zero clearance. Add about 0.1–0.15 mm radial for FDM."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "snap-cap-base-d20",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-base-d20.step",
   "stl": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-base-d20.stl",
   "note": "Annular snap base, 20 mm neck: 20 mm tall, 2 mm wall, 0.4 mm bead 3 mm below the rim"
  },
  {
   "file": "snap-cap-lid-d20",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-lid-d20.step",
   "stl": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-lid-d20.stl",
   "note": "Annular snap lid for the 20 mm base: matching 0.4 mm groove, 6 mm skirt, zero clearance"
  },
  {
   "file": "snap-cap-base-d30",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-base-d30.step",
   "stl": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-base-d30.stl",
   "note": "Annular snap base, 30 mm neck: 26 mm tall, 2 mm wall, 0.5 mm bead 3 mm below the rim"
  },
  {
   "file": "snap-cap-lid-d30",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-lid-d30.step",
   "stl": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-lid-d30.stl",
   "note": "Annular snap lid for the 30 mm base: matching 0.5 mm groove, 6 mm skirt, zero clearance"
  },
  {
   "file": "snap-cap-base-d40",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-base-d40.step",
   "stl": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-base-d40.stl",
   "note": "Annular snap base, 40 mm neck: 32 mm tall, 2 mm wall, 0.6 mm bead 3 mm below the rim"
  },
  {
   "file": "snap-cap-lid-d40",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-lid-d40.step",
   "stl": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-lid-d40.stl",
   "note": "Annular snap lid for the 40 mm base: matching 0.6 mm groove, 6 mm skirt, zero clearance"
  },
  {
   "file": "snap-cap-base-d50",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-base-d50.step",
   "stl": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-base-d50.stl",
   "note": "Annular snap base, 50 mm neck: 38 mm tall, 2 mm wall, 0.7 mm bead 3 mm below the rim"
  },
  {
   "file": "snap-cap-lid-d50",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-lid-d50.step",
   "stl": "https://xemstudio.com/files/3d-printing/annular-snap-fit-caps/snap-cap-lid-d50.stl",
   "note": "Annular snap lid for the 50 mm base: matching 0.7 mm groove, 6 mm skirt, zero clearance"
  }
 ],
 "markdown": "https://xemstudio.com/objects/annular-snap-fit-caps/index.md"
}