{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "bistable-snap-toggle",
 "name": "3D printable bistable snap toggle: slider that clicks to either end, curved leaf springs (STL, STEP)",
 "kind": "hardware",
 "category": "3D printing",
 "group": "Snap fits & clips",
 "year": null,
 "question": "Is there a 3D printable mechanism that snaps a slider to one of two positions and holds it there?",
 "tags": [
  "bistable mechanism",
  "snap through",
  "toggle",
  "detent",
  "compliant mechanism",
  "leaf spring",
  "flexure",
  "slider",
  "click",
  "3d printed mechanism",
  "fidget",
  "stl",
  "step"
 ],
 "aliases": [
  "bistable toggle 3d print",
  "snap through mechanism",
  "detent slider stl",
  "two position latch",
  "leaf spring detent",
  "compliant bistable switch",
  "printable click slider",
  "flexure toggle mechanism"
 ],
 "overall_mm": {
  "length": 136.5,
  "width": 60,
  "height": 7.25
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 10,
 "url": "https://xemstudio.com/objects/bistable-snap-toggle/",
 "sheet_txt": "https://xemstudio.com/objects/bistable-snap-toggle/sheet.txt",
 "sheet": {
  "basis": "Bistable compliant mechanism: two pre-curved leaf springs give two stable slider positions with an energy peak between them (BYU compliant mechanisms research). Xem design.",
  "overall_mm": {
   "length": 136.5,
   "width": 60,
   "height": 7.25
  },
  "notes": [
   "The slider rests at either end. Pushing it toward the middle forces the boss between the two leaf springs, which bend outward; past centre they push it on to the other end with a click.",
   "Leaves are printed in their installed shape and drop over the posts by their end rings. The boss bends each leaf 2.4 mm (50 × 40) or 3.5 mm (75 × 60) at the middle.",
   "Print the leaves in PETG or nylon, 3 mm tall, flat on the bed; PLA leaves crack after repeated flexing. Frame, cover and slider in any material.",
   "0.3 mm clearance is built in: slider in its slots, leaf rings on the posts, parts in the 3.6 mm cavity. Assemble with four M3 × 8 self-tapping screws through the cover into the posts."
  ],
  "table": {
   "columns": [
    "part",
    "50 × 40 size mm",
    "75 × 60 size mm",
    "qty"
   ],
   "rows": [
    [
     "frame",
     "50 × 40 × 5.6",
     "75 × 60 × 5.6",
     "1"
    ],
    [
     "cover",
     "50 × 40 × 1.6",
     "75 × 60 × 1.6",
     "1"
    ],
    [
     "slider (bar + boss)",
     "91 × 6 × 3, boss Ø12",
     "136.5 × 9 × 3, boss Ø18",
     "1"
    ],
    [
     "leaf spring",
     "0.8 thick × 3 tall, 36 span, 8 sag",
     "0.98 thick × 3 tall, 54 span, 12 sag",
     "2"
    ],
    [
     "slider travel",
     "±16.5",
     "±24.75",
     "—"
    ],
    [
     "screws",
     "M3 × 8 self-tapping",
     "M3 × 8 self-tapping",
     "4"
    ]
   ]
  }
 },
 "sheet_text": "3D printable bistable snap toggle: slider that clicks to either end, curved leaf springs (STL, STEP) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/bistable-snap-toggle/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Bistable compliant mechanism: two pre-curved leaf springs give two stable slider positions with an energy peak between them (BYU compliant mechanisms research). Xem design.\nCatalog version: 2026-10-20\n\nOverall (mm): length 136.5, width 60.0, height 7.25\n- The slider rests at either end. Pushing it toward the middle forces the boss between the two leaf springs, which bend outward; past centre they push it on to the other end with a click.\n- Leaves are printed in their installed shape and drop over the posts by their end rings. The boss bends each leaf 2.4 mm (50 × 40) or 3.5 mm (75 × 60) at the middle.\n- Print the leaves in PETG or nylon, 3 mm tall, flat on the bed; PLA leaves crack after repeated flexing. Frame, cover and slider in any material.\n- 0.3 mm clearance is built in: slider in its slots, leaf rings on the posts, parts in the 3.6 mm cavity. Assemble with four M3 × 8 self-tapping screws through the cover into the posts.\n\npart  50 × 40 size mm  75 × 60 size mm  qty\nframe  50 × 40 × 5.6  75 × 60 × 5.6  1\ncover  50 × 40 × 1.6  75 × 60 × 1.6  1\nslider (bar + boss)  91 × 6 × 3, boss Ø12  136.5 × 9 × 3, boss Ø18  1\nleaf spring  0.8 thick × 3 tall, 36 span, 8 sag  0.98 thick × 3 tall, 54 span, 12 sag  2\nslider travel  ±16.5  ±24.75  —\nscrews  M3 × 8 self-tapping  M3 × 8 self-tapping  4\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- BYU Compliant Mechanisms Research Group: Compliant Mechanisms Explained — web — Publisher's page; dimensions are facts — https://compliantmechanisms.byu.edu/about-compliant-mechanisms\n- BYU ScholarsArchive: Jensen, B. D., Identification of Macro- and Micro-Compliant Mechanism Configurations Resulting in Bistable Behavior — web — Publisher's page; dimensions are facts — https://scholarsarchive.byu.edu/etd/83\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 10 parts): https://xemstudio.com/files/3d-printing/bistable-snap-toggle/index.json\nAPI: https://xemstudio.com/api/geometry?object=bistable-snap-toggle\n",
 "sources": [
  {
   "publisher": "BYU Compliant Mechanisms Research Group",
   "title": "Compliant Mechanisms Explained",
   "url": "https://compliantmechanisms.byu.edu/about-compliant-mechanisms",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "BYU ScholarsArchive",
   "title": "Jensen, B. D., Identification of Macro- and Micro-Compliant Mechanism Configurations Resulting in Bistable Behavior",
   "url": "https://scholarsarchive.byu.edu/etd/83",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "flat-serpentine-springs",
  "snap-fit-hooks-and-catches",
  "living-hinge",
  "print-in-place-push-button-flexure",
  "wedge-motion-converter",
  "spiral-flexure-bearing"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "slider in end-wall slots",
   "exact": "bar + 0.6 mm",
   "mates": "frame slots",
   "fit": "run",
   "files": "all"
  },
  {
   "feature": "leaf end rings",
   "exact": "post Ø5 + 0.6 mm",
   "mates": "frame posts",
   "fit": "run",
   "files": "all"
  },
  {
   "feature": "screw holes",
   "exact": "2.5 mm pilot / 3.2 mm clearance",
   "mates": "M3 self-tapping screw",
   "fit": "designed",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What is a bistable mechanism?",
   "a": "One with two resting positions and a hump of stored spring energy between them, so it snaps to one or the other and holds there without power."
  },
  {
   "q": "How does this toggle work?",
   "a": "The slider's round boss must push two curved leaf springs apart to pass the middle. Before centre they push it back; past centre they push it on to the other end."
  },
  {
   "q": "What filament should the springs be?",
   "a": "PETG or nylon. They bend every click; PLA leaves crack after a while."
  },
  {
   "q": "Can I make it snap harder or softer?",
   "a": "Use the 75 × 60 size for a longer stroke, or scale leaf thickness: stiffness rises with thickness cubed."
  },
  {
   "q": "What can I use it for?",
   "a": "Two-position latches, mode switches, detents, lid stays, fidget toys, or any slider that must stay put at its ends."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "toggle-50x40-frame",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-frame.step",
   "stl": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-frame.stl",
   "note": "50x40 mm: Base frame: 2 mm plate with sight window, perimeter wall with slider slots at both ends, four posts with 2.5 mm pilot holes for M3 self-tapping screws"
  },
  {
   "file": "toggle-50x40-cover",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-cover.step",
   "stl": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-cover.stl",
   "note": "50x40 mm: Cover plate: same outline and window, four 3.2 mm screw clearance holes, 1.6 mm thick"
  },
  {
   "file": "toggle-50x40-slider",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-slider.step",
   "stl": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-slider.stl",
   "note": "50x40 mm: Slider: flat bar with a round boss at its middle that squeezes past the leaf springs"
  },
  {
   "file": "toggle-50x40-leaf",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-leaf.step",
   "stl": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-leaf.stl",
   "note": "50x40 mm: Leaf spring: thin arc from post to post with a ring at each end; PETG or nylon"
  },
  {
   "file": "toggle-50x40-assembled",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-assembled.step",
   "stl": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-assembled.stl",
   "note": "50x40 mm: All parts in place, cover closed, slider resting at one end (each part its own solid)"
  },
  {
   "file": "toggle-75x60-frame",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-frame.step",
   "stl": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-frame.stl",
   "note": "75x60 mm: Base frame: 2 mm plate with sight window, perimeter wall with slider slots at both ends, four posts with 2.5 mm pilot holes for M3 self-tapping screws"
  },
  {
   "file": "toggle-75x60-cover",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-cover.step",
   "stl": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-cover.stl",
   "note": "75x60 mm: Cover plate: same outline and window, four 3.2 mm screw clearance holes, 1.6 mm thick"
  },
  {
   "file": "toggle-75x60-slider",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-slider.step",
   "stl": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-slider.stl",
   "note": "75x60 mm: Slider: flat bar with a round boss at its middle that squeezes past the leaf springs"
  },
  {
   "file": "toggle-75x60-leaf",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-leaf.step",
   "stl": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-leaf.stl",
   "note": "75x60 mm: Leaf spring: thin arc from post to post with a ring at each end; PETG or nylon"
  },
  {
   "file": "toggle-75x60-assembled",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-assembled.step",
   "stl": "https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-assembled.stl",
   "note": "75x60 mm: All parts in place, cover closed, slider resting at one end (each part its own solid)"
  }
 ],
 "markdown": "https://xemstudio.com/objects/bistable-snap-toggle/index.md"
}