{ "version": "2026-10-20", "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.", "slug": "compression-cable-lugs-din-46235", "name": "Compression cable lugs, DIN 46235: stud hole, palm width and length, 6 to 300 mm² × M5 to M20 (+ stud-hole gauge)", "kind": "standard", "category": "Electronics", "group": "Wiring & connectors", "year": null, "question": "What are the dimensions of a DIN 46235 compression cable lug: stud hole diameter, palm width, length and barrel size for each cross-section and bolt size?", "tags": [ "cable lug", "crimp lug", "tube lug", "din 46235", "compression", "battery cable", "heavy cable", "ring lug", "electrical" ], "aliases": [ "din 46235", "cable lug dimensions", "tube cable lug size chart", "rohrkabelschuh maße", "cable lug 50mm2 m10", "cable lug 70mm2 m8", "95mm2 cable lug m12", "35 mm2 lug stud hole", "kabelschuh din 46235 tabelle", "battery cable lug 25mm2 m8", "heavy duty copper lug dimensions", "cable lug hole size m10 10.5", "crimp lug 120mm2", "lug palm width" ], "overall_mm": { "length": null, "width": null, "height": null }, "official_cad": false, "xem_status": "free-files", "les": false, "free_files": 1, "url": "https://xemstudio.com/objects/compression-cable-lugs-din-46235/", "sheet_txt": "https://xemstudio.com/objects/compression-cable-lugs-din-46235/sheet.txt", "sheet": { "basis": "DIN 46235 lug table (6 to 300 mm², M5 to M20, 69 rows) from a catalogue mirror, checked against HELUKABEL, Pfisterer and Schrack pages; maker differences shown; stud-hole gauge file is Xem-drawn", "overall_mm": { "length": null, "width": null, "height": null }, "notes": [ "DIN 46235 compression (crimp) cable lugs: a copper tube lug with a flat palm and one hole, crimped hexagonally onto a round stranded conductor of 6 to 1000 mm² (Klauke: stud hole M5 to M20). Cross-sections here are 6 to 300 mm²; the same d1, d3 apply to every stud size of a cross-section, while d2 (the hole) depends on the stud only: M5 5.3, M6 6.4, M8 8.4, M10 10.5, M12 13, M14 15, M16 17, M20 21 mm. Both facts are checked on all 69 rows.", "Source: a lug catalogue mirrored at dtsheet.com (order numbers 14978xxxxx). The copy is flattened text and the source itself warns the columns were re-aligned, so six rows were checked against independent maker pages: 240 mm² M12 at HELUKABEL agrees on all four values (hole 13, strand bore 21.5, width 42.5, length 92); Schrack 150 mm² M10: width 34, length 78, hole 10.5 (table: 34, 79, 10.5).", "Makers differ by about a millimetre on b and l: Pfisterer's 10 mm² M6 lug has b 8.5, d1 4.5, d2 6.5, L 27.5 (table: b 10, d1 4.4, d2 6.4, l 27); 50 mm² M12: b 22, d1 10, d2 13, L 51 (table: b 23, d1 9.8, d2 13, l 52); 120 mm² M10: b 32, d1 15.5, d2 10.5, L 69 (table: b 31, d1 15.5, d2 10.5, l 70). DIN 46235 fixes the stud holes and strand bores; the palm width and length are maker values, so use the lug you buy for anything tighter than ±1 mm.", "Column meanings: l is the length to the centre of the stud hole (HELUKABEL's legend); d is the strand-receptacle bore (HELUKABEL), here d1; the table prints a third diameter d3, which by its size (a few mm over d1) is the barrel's outside diameter. 'Not in the standard' rows (*) are the catalogue's own marking of sizes outside DIN 46235.", "File: one hole gauge plate with the eight stud-hole diameters from the table. The plate size, spacing and thickness are an example, the holes are the catalogue's. Lug solids are not drawn: palm thickness, barrel length and the palm-to-barrel transition are not in any table read.", "Smaller lugs for crimp terminals by stud size and AWG are on the ring-tongue page; wire ferrules for clamp terminals are on their own page." ], "table": { "columns": [ "conductor cross-section, mm²", "bore d1 (strand), mm", "d3 (barrel outside Ø), mm", "stud", "stud hole d2, mm", "palm width b, mm", "length l, mm" ], "rows": [ [ "6", "3.7", "5.5", "M5", "5.3", "8.5", "24" ], [ "6", "3.7", "5.5", "M6", "6.4", "9", "24" ], [ "6", "3.7", "5.5", "M8 (not in the standard)", "8.4", "13", "26" ], [ "10", "4.4", "6", "M5", "5.3", "10", "27" ], [ "10", "4.4", "6", "M6", "6.4", "10", "27" ], [ "10", "4.4", "6", "M8", "8.4", "13", "28" ], [ "10", "4.4", "6", "M10", "10.5", "15", "29" ], [ "16", "5.5", "8.5", "M5 (not in the standard)", "5.3", "13", "36" ], [ "16", "5.5", "8.5", "M6", "6.4", "13", "36" ], [ "16", "5.5", "8.5", "M8", "8.4", "13", "37" ], [ "16", "5.5", "8.5", "M10", "10.5", "13", "38" ], [ "16", "5.5", "8.5", "M12 (not in the standard)", "13", "16.5", "40" ], [ "25", "7", "10", "M6", "6.4", "14", "39" ], [ "25", "7", "10", "M8", "8.4", "17", "39" ], [ "25", "7", "10", "M10", "10.5", "17", "40.5" ], [ "25", "7", "10", "M12", "13", "18", "40.5" ], [ "25", "7", "10", "M16 (not in the standard)", "17", "22", "45" ], [ "35", "8.2", "12.5", "M6 (not in the standard)", "6.4", "17.5", "42.5" ], [ "35", "8.2", "12.5", "M8", "8.4", "18", "42" ], [ "35", "8.2", "12.5", "M10", "10.5", "20", "42.5" ], [ "35", "8.2", "12.5", "M12", "13", "21", "44" ], [ "35", "8.2", "12.5", "M16 (not in the standard)", "17", "28", "47" ], [ "50", "9.8", "14.5", "M6 (not in the standard)", "6.4", "20", "52" ], [ "50", "9.8", "14.5", "M8", "8.4", "20", "52" ], [ "50", "9.8", "14.5", "M10", "10.5", "22", "52" ], [ "50", "9.8", "14.5", "M12", "13", "23", "52" ], [ "50", "9.8", "14.5", "M14 (not in the standard)", "15", "26", "53.5" ], [ "50", "9.8", "14.5", "M16", "17", "28", "55.5" ], [ "50", "9.8", "14.5", "M20 (not in the standard)", "21", "30", "61.5" ], [ "70", "11.3", "16.5", "M8", "8.4", "24", "56" ], [ "70", "11.3", "16.5", "M10", "10.5", "24", "56" ], [ "70", "11.3", "16.5", "M12", "13", "24", "56.5" ], [ "70", "11.3", "16.5", "M14 (not in the standard)", "15", "24", "55.5" ], [ "70", "11.3", "16.5", "M16", "17", "29", "57" ], [ "70", "11.3", "16.5", "M20 (not in the standard)", "21", "31", "61" ], [ "95", "13.5", "19", "M8 (not in the standard)", "8.4", "28", "65" ], [ "95", "13.5", "19", "M10", "10.5", "28", "65.5" ], [ "95", "13.5", "19", "M12", "13", "28", "65.5" ], [ "95", "13.5", "19", "M14 (not in the standard)", "15", "28", "65.5" ], [ "95", "13.5", "19", "M16", "17", "30", "65.5" ], [ "95", "13.5", "19", "M20 (not in the standard)", "21", "33", "71" ], [ "120", "15.5", "21", "M8 (not in the standard)", "8.4", "31", "70" ], [ "120", "15.5", "21", "M10", "10.5", "31", "70" ], [ "120", "15.5", "21", "M12", "13", "31", "70.5" ], [ "120", "15.5", "21", "M14 (not in the standard)", "15", "31", "70" ], [ "120", "15.5", "21", "M16", "17", "31.5", "70" ], [ "120", "15.5", "21", "M20", "21", "36", "72" ], [ "150", "17", "23.5", "M8 (not in the standard)", "8.4", "34", "79" ], [ "150", "17", "23.5", "M10", "10.5", "34", "79" ], [ "150", "17", "23.5", "M12", "13", "34", "78.5" ], [ "150", "17", "23.5", "M14 (not in the standard)", "15", "34", "78" ], [ "150", "17", "23.5", "M16", "17", "34", "78" ], [ "150", "17", "23.5", "M20", "21", "38", "78" ], [ "185", "19", "25.5", "M8 (not in the standard)", "8.4", "37", "83" ], [ "185", "19", "25.5", "M10", "10.5", "37", "83" ], [ "185", "19", "25.5", "M12", "13", "37", "82.5" ], [ "185", "19", "25.5", "M14 (not in the standard)", "15", "37", "82" ], [ "185", "19", "25.5", "M16", "17", "37", "82" ], [ "185", "19", "25.5", "M20", "21", "40", "83" ], [ "240", "21.5", "29", "M10 (not in the standard)", "10.5", "42", "92" ], [ "240", "21.5", "29", "M12", "13", "42.5", "92" ], [ "240", "21.5", "29", "M14 (not in the standard)", "15", "42.5", "92" ], [ "240", "21.5", "29", "M16", "17", "42.5", "92" ], [ "240", "21.5", "29", "M20", "21", "45", "92" ], [ "300", "24.5", "32", "M10 (not in the standard)", "10.5", "48.5", "104" ], [ "300", "24.5", "32", "M12 (not in the standard)", "13", "48.5", "104" ], [ "300", "24.5", "32", "M14 (not in the standard)", "15", "48.5", "104" ], [ "300", "24.5", "32", "M16", "17", "48.5", "100" ], [ "300", "24.5", "32", "M20", "21", "48.5", "100" ] ] } }, "sheet_text": "Compression cable lugs, DIN 46235: stud hole, palm width and length, 6 to 300 mm² × M5 to M20 (+ stud-hole gauge) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/compression-cable-lugs-din-46235/ (sheet CC BY 4.0)\nBasis: DIN 46235 lug table (6 to 300 mm², M5 to M20, 69 rows) from a catalogue mirror, checked against HELUKABEL, Pfisterer and Schrack pages; maker differences shown; stud-hole gauge file is Xem-drawn\nCatalog version: 2026-10-20\n\nSizes: see table below\n- DIN 46235 compression (crimp) cable lugs: a copper tube lug with a flat palm and one hole, crimped hexagonally onto a round stranded conductor of 6 to 1000 mm² (Klauke: stud hole M5 to M20). Cross-sections here are 6 to 300 mm²; the same d1, d3 apply to every stud size of a cross-section, while d2 (the hole) depends on the stud only: M5 5.3, M6 6.4, M8 8.4, M10 10.5, M12 13, M14 15, M16 17, M20 21 mm. Both facts are checked on all 69 rows.\n- Source: a lug catalogue mirrored at dtsheet.com (order numbers 14978xxxxx). The copy is flattened text and the source itself warns the columns were re-aligned, so six rows were checked against independent maker pages: 240 mm² M12 at HELUKABEL agrees on all four values (hole 13, strand bore 21.5, width 42.5, length 92); Schrack 150 mm² M10: width 34, length 78, hole 10.5 (table: 34, 79, 10.5).\n- Makers differ by about a millimetre on b and l: Pfisterer's 10 mm² M6 lug has b 8.5, d1 4.5, d2 6.5, L 27.5 (table: b 10, d1 4.4, d2 6.4, l 27); 50 mm² M12: b 22, d1 10, d2 13, L 51 (table: b 23, d1 9.8, d2 13, l 52); 120 mm² M10: b 32, d1 15.5, d2 10.5, L 69 (table: b 31, d1 15.5, d2 10.5, l 70). DIN 46235 fixes the stud holes and strand bores; the palm width and length are maker values, so use the lug you buy for anything tighter than ±1 mm.\n- Column meanings: l is the length to the centre of the stud hole (HELUKABEL's legend); d is the strand-receptacle bore (HELUKABEL), here d1; the table prints a third diameter d3, which by its size (a few mm over d1) is the barrel's outside diameter. 'Not in the standard' rows (*) are the catalogue's own marking of sizes outside DIN 46235.\n- File: one hole gauge plate with the eight stud-hole diameters from the table. The plate size, spacing and thickness are an example, the holes are the catalogue's. Lug solids are not drawn: palm thickness, barrel length and the palm-to-barrel transition are not in any table read.\n- Smaller lugs for crimp terminals by stud size and AWG are on the ring-tongue page; wire ferrules for clamp terminals are on their own page.\n\nconductor cross-section, mm² bore d1 (strand), mm d3 (barrel outside Ø), mm stud stud hole d2, mm palm width b, mm length l, mm\n6 3.7 5.5 M5 5.3 8.5 24\n6 3.7 5.5 M6 6.4 9 24\n6 3.7 5.5 M8 (not in the standard) 8.4 13 26\n10 4.4 6 M5 5.3 10 27\n10 4.4 6 M6 6.4 10 27\n10 4.4 6 M8 8.4 13 28\n10 4.4 6 M10 10.5 15 29\n16 5.5 8.5 M5 (not in the standard) 5.3 13 36\n16 5.5 8.5 M6 6.4 13 36\n16 5.5 8.5 M8 8.4 13 37\n16 5.5 8.5 M10 10.5 13 38\n16 5.5 8.5 M12 (not in the standard) 13 16.5 40\n25 7 10 M6 6.4 14 39\n25 7 10 M8 8.4 17 39\n25 7 10 M10 10.5 17 40.5\n25 7 10 M12 13 18 40.5\n25 7 10 M16 (not in the standard) 17 22 45\n35 8.2 12.5 M6 (not in the standard) 6.4 17.5 42.5\n35 8.2 12.5 M8 8.4 18 42\n35 8.2 12.5 M10 10.5 20 42.5\n35 8.2 12.5 M12 13 21 44\n35 8.2 12.5 M16 (not in the standard) 17 28 47\n50 9.8 14.5 M6 (not in the standard) 6.4 20 52\n50 9.8 14.5 M8 8.4 20 52\n50 9.8 14.5 M10 10.5 22 52\n50 9.8 14.5 M12 13 23 52\n50 9.8 14.5 M14 (not in the standard) 15 26 53.5\n50 9.8 14.5 M16 17 28 55.5\n50 9.8 14.5 M20 (not in the standard) 21 30 61.5\n70 11.3 16.5 M8 8.4 24 56\n70 11.3 16.5 M10 10.5 24 56\n70 11.3 16.5 M12 13 24 56.5\n70 11.3 16.5 M14 (not in the standard) 15 24 55.5\n70 11.3 16.5 M16 17 29 57\n70 11.3 16.5 M20 (not in the standard) 21 31 61\n95 13.5 19 M8 (not in the standard) 8.4 28 65\n95 13.5 19 M10 10.5 28 65.5\n95 13.5 19 M12 13 28 65.5\n95 13.5 19 M14 (not in the standard) 15 28 65.5\n95 13.5 19 M16 17 30 65.5\n95 13.5 19 M20 (not in the standard) 21 33 71\n120 15.5 21 M8 (not in the standard) 8.4 31 70\n120 15.5 21 M10 10.5 31 70\n120 15.5 21 M12 13 31 70.5\n120 15.5 21 M14 (not in the standard) 15 31 70\n120 15.5 21 M16 17 31.5 70\n120 15.5 21 M20 21 36 72\n150 17 23.5 M8 (not in the standard) 8.4 34 79\n150 17 23.5 M10 10.5 34 79\n150 17 23.5 M12 13 34 78.5\n150 17 23.5 M14 (not in the standard) 15 34 78\n150 17 23.5 M16 17 34 78\n150 17 23.5 M20 21 38 78\n185 19 25.5 M8 (not in the standard) 8.4 37 83\n185 19 25.5 M10 10.5 37 83\n185 19 25.5 M12 13 37 82.5\n185 19 25.5 M14 (not in the standard) 15 37 82\n185 19 25.5 M16 17 37 82\n185 19 25.5 M20 21 40 83\n240 21.5 29 M10 (not in the standard) 10.5 42 92\n240 21.5 29 M12 13 42.5 92\n240 21.5 29 M14 (not in the standard) 15 42.5 92\n240 21.5 29 M16 17 42.5 92\n240 21.5 29 M20 21 45 92\n300 24.5 32 M10 (not in the standard) 10.5 48.5 104\n300 24.5 32 M12 (not in the standard) 13 48.5 104\n300 24.5 32 M14 (not in the standard) 15 48.5 104\n300 24.5 32 M16 17 48.5 100\n300 24.5 32 M20 21 48.5 100\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- dtsheet.com (catalogue mirror, order numbers 14978xxxxx): DIN 46235 tube cable lugs 6 to 300 mm2: die code, d1, d3, hole M and d2, b, l (* = not standardised); copy flattened, six rows cross-checked — web — Publisher's page; dimensions are facts — https://dtsheet.com/doc/1816621/download\n- HELUKABEL: Compression cable lug 240 mm2 M12 (DIN 46235 arrangement RM): hole 13, strand bore 21.5, width 42.5, length 92 — web — Publisher's page; dimensions are facts — https://shop.helukabel.com/tr-en/helu-s-pk-cu-din-m907677/906532\n- Pfisterer: Cable lug DIN 46235, M6, 10 mm2: b 8.5, d1 4.5, d2 6.5, L 27.5 — web — Publisher's page; dimensions are facts — https://catalogue.pfisterer.com/en/300001001/\n- Pfisterer: Cable lug DIN 46235, M12, 50 mm2: b 22, d1 10, d2 13, L 51 — web — Publisher's page; dimensions are facts — https://catalogue.pfisterer.com/en/300013015/\n- Pfisterer: Cable lug DIN 46235, M10, 120 mm2: b 32, d1 15.5, d2 10.5, L 69 — web — Publisher's page; dimensions are facts — https://catalogue.pfisterer.com/en/300025359/\n- Schrack Technik: Compression cable lug DIN 46235, 150 mm2 M10: width 34, length 78, hole 10.5 — web — Publisher's page; dimensions are facts — https://www.schrack.com/shop/compression-cable-lug-din-46235-150mm2-m10-xcz110r10a.html\n- Klauke: Compression cable lugs according to DIN 46235: 6 to 1000 mm2, stud hole M5 to M20, marking example — web — Publisher's page; dimensions are facts — https://klauke.com/pl/en/compression-cable-lugs-according-to-din-46235\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/compression-cable-lugs-din-46235/index.json\nAPI: https://xemstudio.com/api/geometry?object=compression-cable-lugs-din-46235\n", "sources": [ { "publisher": "dtsheet.com (catalogue mirror, order numbers 14978xxxxx)", "title": "DIN 46235 tube cable lugs 6 to 300 mm2: die code, d1, d3, hole M and d2, b, l (* = not standardised); copy flattened, six rows cross-checked", "url": "https://dtsheet.com/doc/1816621/download", "formats": [ "web" ], "license": "Publisher's page; dimensions are facts", "license_verified": true, "hosted": false }, { "publisher": "HELUKABEL", "title": "Compression cable lug 240 mm2 M12 (DIN 46235 arrangement RM): hole 13, strand bore 21.5, width 42.5, length 92", "url": "https://shop.helukabel.com/tr-en/helu-s-pk-cu-din-m907677/906532", "formats": [ "web" ], "license": "Publisher's page; dimensions are facts", "license_verified": true, "hosted": false }, { "publisher": "Pfisterer", "title": "Cable lug DIN 46235, M6, 10 mm2: b 8.5, d1 4.5, d2 6.5, L 27.5", "url": "https://catalogue.pfisterer.com/en/300001001/", "formats": [ "web" ], "license": "Publisher's page; dimensions are facts", "license_verified": true, "hosted": false }, { "publisher": "Pfisterer", "title": "Cable lug DIN 46235, M12, 50 mm2: b 22, d1 10, d2 13, L 51", "url": "https://catalogue.pfisterer.com/en/300013015/", "formats": [ "web" ], "license": "Publisher's page; dimensions are facts", "license_verified": true, "hosted": false }, { "publisher": "Pfisterer", "title": "Cable lug DIN 46235, M10, 120 mm2: b 32, d1 15.5, d2 10.5, L 69", "url": "https://catalogue.pfisterer.com/en/300025359/", "formats": [ "web" ], "license": "Publisher's page; dimensions are facts", "license_verified": true, "hosted": false }, { "publisher": "Schrack Technik", "title": "Compression cable lug DIN 46235, 150 mm2 M10: width 34, length 78, hole 10.5", "url": "https://www.schrack.com/shop/compression-cable-lug-din-46235-150mm2-m10-xcz110r10a.html", "formats": [ "web" ], "license": "Publisher's page; dimensions are facts", "license_verified": true, "hosted": false }, { "publisher": "Klauke", "title": "Compression cable lugs according to DIN 46235: 6 to 1000 mm2, stud hole M5 to M20, marking example", "url": "https://klauke.com/pl/en/compression-cable-lugs-according-to-din-46235", "formats": [ "web" ], "license": "Publisher's page; dimensions are facts", "license_verified": true, "hosted": false } ], "xem": { "status": "free-files", "sheet_free": true, "mesh_price_usd": null, "step_price_usd": null, "tolerance_mm": null }, "related": [ "ring-tongue-terminals-by-stud-and-wire", "wire-end-ferrules-din-46228", "terminal-blocks", "awg-wire-gauge-table-astm-b258", "thread-reference-tap-drills-clearance", "heat-shrink-tubing-sizes" ], "fits": [], "dimensions": "exact (nominal, no tolerance added)", "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/", "mating": [ { "feature": "stud hole d2", "exact": "Ø5.3 (M5), 6.4 (M6), 8.4 (M8), 10.5 (M10), 13 (M12), 15 (M14), 17 (M16), 21 (M20)", "mates": "bolt or stud of that thread (bolt sizes on thread-reference-tap-drills-clearance); gauge files are the holes", "fit": "slide", "files": "stud-hole" } ], "fit_classes": { "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.", "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.", "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).", "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.", "clamp": "split part that closes on the mating part with screws: make it at size.", "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change." }, "faq": [ { "q": "What hole does an M10 cable lug have?", "a": "Ø10.5 mm (M8 8.4, M12 13, M16 17, M20 21); the hole depends on the stud only." }, { "q": "How big is a 50 mm² lug for M10?", "a": "In the table: strand bore 9.8, barrel Ø14.5, palm width 22 and length 52 mm (to the hole centre); other makers differ by about 1 mm." }, { "q": "What sizes does DIN 46235 cover?", "a": "Klauke gives 6 to 1000 mm² with stud holes M5 to M20; this page tabulates 6 to 300 mm²." }, { "q": "Are the palm width and length standardised?", "a": "Only loosely: Pfisterer, HELUKABEL, Schrack and the catalogue above agree on the holes and bores but differ by up to about 1 mm on b and l." } ], "files_license": null, "offers": [ { "file": "stud-hole-gauge-m5-to-m20-din-46235", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/compression-cable-lugs-din-46235/stud-hole-gauge-m5-to-m20-din-46235.step", "stl": "https://xemstudio.com/files/hardware/compression-cable-lugs-din-46235/stud-hole-gauge-m5-to-m20-din-46235.stl", "note": "Stud-hole gauge plate for DIN 46235 lug palms: eight through holes Ø5.3 (M5), 6.4 (M6), 8.4 (M8), 10.5 (M10), 13 (M12), 15 (M14), 17 (M16), 21 (M20), smallest first, as in the lug table (d2); plate 152.6 × 35.0 × 3 mm with 3 mm corners is an example (the standard does not define a plate), hole sizes are the table's" } ], "markdown": "https://xemstudio.com/objects/compression-cable-lugs-din-46235/index.md" }