{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "drill-bushings-din-179-headless",
 "name": "Drill bushings DIN 179 (headless press-fit): bore range, OD n6, lengths, 0.4 to 63 mm + STEP/STL sleeves",
 "kind": "standard",
 "category": "Hardware",
 "group": "Bearings, rails & motion",
 "year": null,
 "question": "What are the dimensions of a DIN 179 press-fit drill bushing without a collar: bore range, outside diameter, length, and what hole does it press into?",
 "tags": [
  "drill bushing",
  "jig bushing",
  "din 179",
  "guide bushing",
  "press fit",
  "headless",
  "plain",
  "n6",
  "f7"
 ],
 "aliases": [
  "din 179",
  "din 179 drill bushing",
  "drill bushing without collar",
  "jig bushing plain",
  "guide bushing din 179",
  "drill bush dimensions",
  "drill bushing od",
  "drill bushing 6 mm bore",
  "drill bushing 3 mm",
  "press fit drill bushing h7",
  "din 179 a 10 x 16",
  "din 179 stl",
  "din 179 step",
  "headless drill bushing",
  "drill bush n6",
  "slip fit vs press fit drill bushing"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 23,
 "url": "https://xemstudio.com/objects/drill-bushings-din-179-headless/",
 "sheet_txt": "https://xemstudio.com/objects/drill-bushings-din-179-headless/sheet.txt",
 "sheet": {
  "basis": "KIPP data sheet K1021 and OPAC's DIN 179 table (agree on 18 rows), JW Winco for the F7 / n6 / H7 fits; McMaster-Carr linked for CAD",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "DIN 179 is the plain press-fit drill bushing without a collar (headless): a hardened, ground steel sleeve that is pressed into a jig plate to guide a drill or reamer. The bore d1 is ground to F7, the outside d2 to n6, and the receiving hole in the plate is H7 (JW Winco: 'holes with tolerance H7 are recommended', the pair being a transition fit). Bores come in steps inside each range (OPAC's gradation column): 0.1 mm up to 1.8 mm, 0.1 or 0.25 mm up to 15 mm, 0.25 mm up to 35 mm, 0.5 mm from 35.5 to 55 mm and 1 mm from 56 mm; KIPP says only 'above 15 mm, size increases are 0.5 mm', which disagrees.",
   "DIN 172 and DIN 179 are easy to swap: DIN 172 is the one with the collar (DIN Media: 'Press fit jig bushes, headed'), DIN 179 has none. The bodies (d1, d2, lengths) of the two are identical row for row; see the DIN 172 page for the collar. The wording 'DIN 179 headed / DIN 172 headless' sometimes seen in listings is wrong.",
   "Where the sources agree: d2 and the short and long lengths for every row from 0.9 mm up (KIPP K1021 and OPAC 481). They differ in three ways: KIPP lists three lengths from the 2.7 to 3.3 range up (short / medium / long) and OPAC two, with OPAC's long equal to KIPP's medium; KIPP's third length equals the next row's long. KIPP starts the bore ranges above 15 mm at x.5 and OPAC at x.25. KIPP has a first row (0.4 to 0.8 mm, d2 3, l1 6) that OPAC does not; OPAC has two rows above 48 mm (d2 70 and 78) that KIPP does not. The one-source rows are marked. KIPP also prints R (1 to 3.5) and a T tolerance column without defining them; R is shown as printed and T is left out.",
   "Files: the 18 rows read in both sources get a sleeve at the short length (bore example in the table), and five of them (bores 3, 6, 10, 12, 22) also at the long length. The bore in each file is an example inside the published range, not a standard value. Bore chamfer, edge radius (Form A has one end of the bore rounded) and the lead-in are not drawn: the sheets give R without saying where it applies. Add your process allowance to the plate hole (H7) and leave the sleeve at nominal.",
   "Not covered: DIN 179 B (rounded at both ends), the XL lengths, the 'mould' bushes (ISO 8018 is a different part), slip and renewable bushings, and bores above 63 mm."
  ],
  "table": {
   "columns": [
    "bore d1 range, mm (F7)",
    "OD d2, mm (n6)",
    "l1 short, mm",
    "l1 long, mm (KIPP: medium)",
    "l1 extra long, mm (KIPP only)",
    "R, mm (KIPP, as printed)",
    "example bore in the file, mm",
    "sources"
   ],
   "rows": [
    [
     "0.4 – 0.8",
     "3",
     "6",
     "—",
     "—",
     "1",
     "—",
     "KIPP"
    ],
    [
     "0.9 – 1",
     "3",
     "6",
     "9",
     "—",
     "1",
     "1",
     "KIPP + OPAC"
    ],
    [
     "1.1 – 1.8",
     "4",
     "6",
     "9",
     "—",
     "1",
     "1.5",
     "KIPP + OPAC"
    ],
    [
     "1.9 – 2.6",
     "5",
     "6",
     "9",
     "—",
     "1",
     "2",
     "KIPP + OPAC"
    ],
    [
     "2.7 – 3.3",
     "6",
     "8",
     "12",
     "16",
     "1",
     "3",
     "KIPP + OPAC"
    ],
    [
     "3.4 – 4",
     "7",
     "8",
     "12",
     "16",
     "1",
     "4",
     "KIPP + OPAC"
    ],
    [
     "4.1 – 5",
     "8",
     "8",
     "12",
     "16",
     "1",
     "5",
     "KIPP + OPAC"
    ],
    [
     "5.1 – 6",
     "10",
     "10",
     "16",
     "20",
     "1.5",
     "6",
     "KIPP + OPAC"
    ],
    [
     "6.1 – 8",
     "12",
     "10",
     "16",
     "20",
     "1.5",
     "8",
     "KIPP + OPAC"
    ],
    [
     "8.1 – 10",
     "15",
     "12",
     "20",
     "25",
     "2",
     "10",
     "KIPP + OPAC"
    ],
    [
     "10.1 – 12",
     "18",
     "12",
     "20",
     "25",
     "2",
     "12",
     "KIPP + OPAC"
    ],
    [
     "12.1 – 15",
     "22",
     "16",
     "28",
     "36",
     "2",
     "15",
     "KIPP + OPAC"
    ],
    [
     "15.5 – 18 (OPAC: from 15.25)",
     "26",
     "16",
     "28",
     "36",
     "2",
     "18",
     "KIPP + OPAC"
    ],
    [
     "18.5 – 22 (OPAC: from 18.25)",
     "30",
     "20",
     "36",
     "45",
     "3",
     "22",
     "KIPP + OPAC"
    ],
    [
     "22.5 – 26 (OPAC: from 22.25)",
     "35",
     "20",
     "36",
     "45",
     "3",
     "26",
     "KIPP + OPAC"
    ],
    [
     "26.5 – 30 (OPAC: from 26.25)",
     "42",
     "25",
     "45",
     "56",
     "3",
     "30",
     "KIPP + OPAC"
    ],
    [
     "30.5 – 35 (OPAC: from 30.25)",
     "48",
     "25",
     "45",
     "56",
     "3",
     "35",
     "KIPP + OPAC"
    ],
    [
     "35.5 – 42",
     "55",
     "30",
     "56",
     "67",
     "3.5",
     "42",
     "KIPP + OPAC"
    ],
    [
     "42.5 – 48",
     "62",
     "30",
     "56",
     "67",
     "3.5",
     "48",
     "KIPP + OPAC"
    ],
    [
     "48.5 – 55",
     "70",
     "30",
     "56",
     "—",
     "—",
     "—",
     "OPAC only"
    ],
    [
     "56 – 63",
     "78",
     "35",
     "67",
     "—",
     "—",
     "—",
     "OPAC only"
    ]
   ]
  }
 },
 "sheet_text": "Drill bushings DIN 179 (headless press-fit): bore range, OD n6, lengths, 0.4 to 63 mm + STEP/STL sleeves — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/drill-bushings-din-179-headless/  (sheet CC BY 4.0)\nBasis: KIPP data sheet K1021 and OPAC's DIN 179 table (agree on 18 rows), JW Winco for the F7 / n6 / H7 fits; McMaster-Carr linked for CAD\nCatalog version: 2026-10-20\n\nSizes: see table below\n- DIN 179 is the plain press-fit drill bushing without a collar (headless): a hardened, ground steel sleeve that is pressed into a jig plate to guide a drill or reamer. The bore d1 is ground to F7, the outside d2 to n6, and the receiving hole in the plate is H7 (JW Winco: 'holes with tolerance H7 are recommended', the pair being a transition fit). Bores come in steps inside each range (OPAC's gradation column): 0.1 mm up to 1.8 mm, 0.1 or 0.25 mm up to 15 mm, 0.25 mm up to 35 mm, 0.5 mm from 35.5 to 55 mm and 1 mm from 56 mm; KIPP says only 'above 15 mm, size increases are 0.5 mm', which disagrees.\n- DIN 172 and DIN 179 are easy to swap: DIN 172 is the one with the collar (DIN Media: 'Press fit jig bushes, headed'), DIN 179 has none. The bodies (d1, d2, lengths) of the two are identical row for row; see the DIN 172 page for the collar. The wording 'DIN 179 headed / DIN 172 headless' sometimes seen in listings is wrong.\n- Where the sources agree: d2 and the short and long lengths for every row from 0.9 mm up (KIPP K1021 and OPAC 481). They differ in three ways: KIPP lists three lengths from the 2.7 to 3.3 range up (short / medium / long) and OPAC two, with OPAC's long equal to KIPP's medium; KIPP's third length equals the next row's long. KIPP starts the bore ranges above 15 mm at x.5 and OPAC at x.25. KIPP has a first row (0.4 to 0.8 mm, d2 3, l1 6) that OPAC does not; OPAC has two rows above 48 mm (d2 70 and 78) that KIPP does not. The one-source rows are marked. KIPP also prints R (1 to 3.5) and a T tolerance column without defining them; R is shown as printed and T is left out.\n- Files: the 18 rows read in both sources get a sleeve at the short length (bore example in the table), and five of them (bores 3, 6, 10, 12, 22) also at the long length. The bore in each file is an example inside the published range, not a standard value. Bore chamfer, edge radius (Form A has one end of the bore rounded) and the lead-in are not drawn: the sheets give R without saying where it applies. Add your process allowance to the plate hole (H7) and leave the sleeve at nominal.\n- Not covered: DIN 179 B (rounded at both ends), the XL lengths, the 'mould' bushes (ISO 8018 is a different part), slip and renewable bushings, and bores above 63 mm.\n\nbore d1 range, mm (F7)  OD d2, mm (n6)  l1 short, mm  l1 long, mm (KIPP: medium)  l1 extra long, mm (KIPP only)  R, mm (KIPP, as printed)  example bore in the file, mm  sources\n0.4 – 0.8  3  6  —  —  1  —  KIPP\n0.9 – 1  3  6  9  —  1  1  KIPP + OPAC\n1.1 – 1.8  4  6  9  —  1  1.5  KIPP + OPAC\n1.9 – 2.6  5  6  9  —  1  2  KIPP + OPAC\n2.7 – 3.3  6  8  12  16  1  3  KIPP + OPAC\n3.4 – 4  7  8  12  16  1  4  KIPP + OPAC\n4.1 – 5  8  8  12  16  1  5  KIPP + OPAC\n5.1 – 6  10  10  16  20  1.5  6  KIPP + OPAC\n6.1 – 8  12  10  16  20  1.5  8  KIPP + OPAC\n8.1 – 10  15  12  20  25  2  10  KIPP + OPAC\n10.1 – 12  18  12  20  25  2  12  KIPP + OPAC\n12.1 – 15  22  16  28  36  2  15  KIPP + OPAC\n15.5 – 18 (OPAC: from 15.25)  26  16  28  36  2  18  KIPP + OPAC\n18.5 – 22 (OPAC: from 18.25)  30  20  36  45  3  22  KIPP + OPAC\n22.5 – 26 (OPAC: from 22.25)  35  20  36  45  3  26  KIPP + OPAC\n26.5 – 30 (OPAC: from 26.25)  42  25  45  56  3  30  KIPP + OPAC\n30.5 – 35 (OPAC: from 30.25)  48  25  45  56  3  35  KIPP + OPAC\n35.5 – 42  55  30  56  67  3.5  42  KIPP + OPAC\n42.5 – 48  62  30  56  67  3.5  48  KIPP + OPAC\n48.5 – 55  70  30  56  —  —  —  OPAC only\n56 – 63  78  35  67  —  —  —  OPAC only\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- KIPP (via marek.eu): K1021 drill bushes DIN 179: D1 range, D2 (n6), L1 short / medium / long, R, T; D1 F7 — web — Publisher's page; dimensions are facts — https://www.marek.eu/data/katalogove-listy/kipp/K1021.pdf\n- OPAC: DIN 179 drill bushes headless, form A: bore range, OD, short / long length — web — Publisher's page; dimensions are facts — https://www.opac.net/en/producto-481-din-179\n- JW Winco: DIN 179 press-fit drill bushings: d1 F7, d2 n6, H7 receiving bore recommended, H7/n6 transition fit; CAD downloads on the part pages — web — Publisher's page; dimensions are facts — https://www.jwwinco.mx/en-us/products/product-family/Stainless-Steel/DIN-179-Stainless-Steel-Press-Fit-Drill-Bushings\n- McMaster-Carr: Drill bushings (press-fit, headed and plain, inch and metric) (free STEP/IGES per part, for your own design use; no redistribution) — STEP, IGES, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/drill-bushings/\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 23 parts): https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/index.json\nAPI: https://xemstudio.com/api/geometry?object=drill-bushings-din-179-headless\n",
 "sources": [
  {
   "publisher": "KIPP (via marek.eu)",
   "title": "K1021 drill bushes DIN 179: D1 range, D2 (n6), L1 short / medium / long, R, T; D1 F7",
   "url": "https://www.marek.eu/data/katalogove-listy/kipp/K1021.pdf",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "OPAC",
   "title": "DIN 179 drill bushes headless, form A: bore range, OD, short / long length",
   "url": "https://www.opac.net/en/producto-481-din-179",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "JW Winco",
   "title": "DIN 179 press-fit drill bushings: d1 F7, d2 n6, H7 receiving bore recommended, H7/n6 transition fit; CAD downloads on the part pages",
   "url": "https://www.jwwinco.mx/en-us/products/product-family/Stainless-Steel/DIN-179-Stainless-Steel-Press-Fit-Drill-Bushings",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "McMaster-Carr",
   "title": "Drill bushings (press-fit, headed and plain, inch and metric) (free STEP/IGES per part, for your own design use; no redistribution)",
   "url": "https://www.mcmaster.com/products/drill-bushings/",
   "formats": [
    "STEP",
    "IGES",
    "PDF"
   ],
   "license": "McMaster-Carr site terms: personal design use, no redistribution",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "drill-bushings-din-172-headed",
  "drill-bushings-ansi-b94-33-p-h",
  "sintered-bushings-iso-2795",
  "linear-ball-bushings-lm-uu-luu",
  "dowel-pins-iso-2338-8734",
  "drill-size-index-number-letter-fraction"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "OD d2 (n6)",
   "exact": "Ø3 to Ø78 by row (6 for a 2.7 to 3.3 bore, 10 for 5.1 to 6, 18 for 10.1 to 12)",
   "mates": "plate bore Ø d2 to H7 (JW Winco: H7 recommended; H7/n6 transition fit): the file OD is the nominal d2",
   "fit": "press",
   "files": "drill-bushing-din-179"
  },
  {
   "feature": "bore d1 (F7)",
   "exact": "the example bore in the file name (Ø1.0 to Ø48)",
   "mates": "the drill or reamer of the same nominal diameter: ground F7 guide fit",
   "fit": "slide",
   "files": "drill-bushing-din-179"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What size hole does a DIN 179 drill bushing press into?",
   "a": "A hole to H7 for the bushing's outside diameter d2 (n6): for a 6 mm bore, d2 is 10 mm, so a Ø10 H7 hole."
  },
  {
   "q": "What is the difference between DIN 172 and DIN 179?",
   "a": "DIN 172 has a collar (head) on the top, DIN 179 does not. The bore, outside diameter and lengths are the same."
  },
  {
   "q": "What are the standard lengths of a DIN 179 bushing?",
   "a": "Short and long per row: for a 6 mm bore (OD 10): 10 and 16 mm; for 12 mm bore (OD 18): 12 and 20 mm. KIPP also lists a third, longer length."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "drill-bushing-din-179-bore1-od3-l6",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore1-od3-l6.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore1-od3-l6.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø1 (an example inside the 0.9 to 1 range), OD Ø3 (n6), length 6 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore1.5-od4-l6",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore1.5-od4-l6.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore1.5-od4-l6.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø1.5 (an example inside the 1.1 to 1.8 range), OD Ø4 (n6), length 6 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore2-od5-l6",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore2-od5-l6.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore2-od5-l6.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø2 (an example inside the 1.9 to 2.6 range), OD Ø5 (n6), length 6 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore3-od6-l8",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore3-od6-l8.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore3-od6-l8.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø3 (an example inside the 2.7 to 3.3 range), OD Ø6 (n6), length 8 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore3-od6-l12",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore3-od6-l12.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore3-od6-l12.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø3 (an example inside the 2.7 to 3.3 range), OD Ø6 (n6), length 12 (long); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore4-od7-l8",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore4-od7-l8.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore4-od7-l8.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø4 (an example inside the 3.4 to 4 range), OD Ø7 (n6), length 8 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore5-od8-l8",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore5-od8-l8.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore5-od8-l8.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø5 (an example inside the 4.1 to 5 range), OD Ø8 (n6), length 8 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore6-od10-l10",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore6-od10-l10.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore6-od10-l10.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø6 (an example inside the 5.1 to 6 range), OD Ø10 (n6), length 10 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore6-od10-l16",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore6-od10-l16.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore6-od10-l16.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø6 (an example inside the 5.1 to 6 range), OD Ø10 (n6), length 16 (long); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore8-od12-l10",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore8-od12-l10.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore8-od12-l10.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø8 (an example inside the 6.1 to 8 range), OD Ø12 (n6), length 10 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore10-od15-l12",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore10-od15-l12.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore10-od15-l12.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø10 (an example inside the 8.1 to 10 range), OD Ø15 (n6), length 12 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore10-od15-l20",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore10-od15-l20.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore10-od15-l20.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø10 (an example inside the 8.1 to 10 range), OD Ø15 (n6), length 20 (long); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore12-od18-l12",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore12-od18-l12.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore12-od18-l12.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø12 (an example inside the 10.1 to 12 range), OD Ø18 (n6), length 12 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore12-od18-l20",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore12-od18-l20.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore12-od18-l20.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø12 (an example inside the 10.1 to 12 range), OD Ø18 (n6), length 20 (long); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore15-od22-l16",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore15-od22-l16.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore15-od22-l16.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø15 (an example inside the 12.1 to 15 range), OD Ø22 (n6), length 16 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore18-od26-l16",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore18-od26-l16.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore18-od26-l16.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø18 (an example inside the 15.5 to 18 range), OD Ø26 (n6), length 16 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore22-od30-l20",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore22-od30-l20.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore22-od30-l20.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø22 (an example inside the 18.5 to 22 range), OD Ø30 (n6), length 20 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore22-od30-l36",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore22-od30-l36.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore22-od30-l36.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø22 (an example inside the 18.5 to 22 range), OD Ø30 (n6), length 36 (long); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore26-od35-l20",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore26-od35-l20.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore26-od35-l20.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø26 (an example inside the 22.5 to 26 range), OD Ø35 (n6), length 20 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore30-od42-l25",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore30-od42-l25.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore30-od42-l25.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø30 (an example inside the 26.5 to 30 range), OD Ø42 (n6), length 25 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore35-od48-l25",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore35-od48-l25.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore35-od48-l25.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø35 (an example inside the 30.5 to 35 range), OD Ø48 (n6), length 25 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore42-od55-l30",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore42-od55-l30.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore42-od55-l30.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø42 (an example inside the 35.5 to 42 range), OD Ø55 (n6), length 30 (short); plain sleeve, no lead-in chamfer or bore radius"
  },
  {
   "file": "drill-bushing-din-179-bore48-od62-l30",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore48-od62-l30.step",
   "stl": "https://xemstudio.com/files/hardware/drill-bushings-din-179-headless/drill-bushing-din-179-bore48-od62-l30.stl",
   "note": "DIN 179 headless press-fit drill bushing: bore Ø48 (an example inside the 42.5 to 48 range), OD Ø62 (n6), length 30 (short); plain sleeve, no lead-in chamfer or bore radius"
  }
 ],
 "markdown": "https://xemstudio.com/objects/drill-bushings-din-179-headless/index.md"
}