{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "drip-irrigation-tubing-sizes",
 "name": "Drip irrigation tubing sizes: 1/8, 1/4 and 1/2 in poly tubing, ID x OD (0.170 x 0.250, 0.600 x 0.700 in)",
 "kind": "standard",
 "category": "Tri-clamp & pipe",
 "group": "Pipe, tube & threads",
 "year": null,
 "question": "What are the inside and outside diameters of 1/4 inch and 1/2 inch drip irrigation tubing?",
 "tags": [
  "drip irrigation",
  "drip tubing",
  "irrigation tubing",
  "poly tubing",
  "1/4 tubing",
  "1/2 tubing",
  "barbed fitting",
  "garden",
  "watering",
  "tote"
 ],
 "aliases": [
  "1/4 drip tubing id od",
  "1/2 drip irrigation tubing size",
  "drip tubing 0.170 x 0.250",
  "17mm drip tubing od",
  "1/2 inch poly tubing 0.600 id 0.700 od",
  "drip irrigation tubing sizes chart",
  "1/4 barbed fitting tubing size",
  "dig 1/2 tubing dimensions",
  "half inch drip line outside diameter",
  "1/8 drip tubing size",
  "drip micro tubing 4mm",
  "hunter 17 mm tubing"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "not-scanned",
 "les": false,
 "free_files": 0,
 "url": "https://xemstudio.com/objects/drip-irrigation-tubing-sizes/",
 "sheet_txt": "https://xemstudio.com/objects/drip-irrigation-tubing-sizes/sheet.txt",
 "sheet": {
  "basis": "DIG's tubing pages and listings, DripWorks and Hunter's supply tubing page; ID and OD as makers print them, mm = inch × 25.4; numbers only",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Drip tubing is named by a nominal size that is not a measured diameter. 1/4 in micro tubing is 0.170 in ID × 0.250 in OD (4.32 × 6.35 mm) at DripWorks and DIG; DIG's own page prints the 1/4 in ID as a range, .140 in to .170 in. 1/8 in tubing is 0.125 × 0.187 in (DIG). DripWorks says its 1/4 in tubing fits 1/4 in barbed micro fittings and will not fit 1/8 in barbs.",
   "1/2 in 'half-inch' tubing is sold in several ID × OD sizes, so the barbed or compression fitting has to match the tube you own: DIG's specification list shows .520 × .620, .570 × .670, .600 × .700 and .620 × .710 in, and its model table also lists 0.530 × 0.630, 0.580 × 0.690 and .615 × .710 in. The common one, 0.600 in ID × 0.700 in OD (17.8 mm OD), matches Hunter's TWPE-700 (OD 17.8 mm × ID 15.2 mm). DIG prints a 1/2 in operating pressure up to 60 psi (4.2 bar) and wall 0.050 in (0.045 in for the .620 × .710).",
   "Barbed fitting dimensions (barb OD, barb length, number of barbs) are not published in any page read: DIG lists its 1/4 in barbed fittings (long barb, tee, elbow, short barb) without sizes, and retailer pages give only the nominal tube size. They are left out, and no barb geometry is drawn. For hose barbs and silicone tube see silicone-tube-and-fittings; for an unthreaded garden-hose connection see garden-hose-thread. 3/4 in and 1 in mainline polyethylene pipe follow IPS / CTS sizes and are not on this page.",
   "No file: tubing is a plain ring and the fittings are undefined here. a web search found no McMaster-Carr drip-irrigation category, so none is linked."
  ],
  "table": {
   "columns": [
    "nominal size",
    "inside diameter",
    "outside diameter",
    "wall",
    "source"
   ],
   "rows": [
    [
     "1/8 in",
     "0.125 in (3.17 mm)",
     "0.187 in (4.75 mm)",
     "—",
     "DIG SKU 12-085 (Hydrobuilder listing)"
    ],
    [
     "1/4 in",
     "0.170 in (4.32 mm)",
     "0.250 in (6.35 mm)",
     "—",
     "DripWorks; DIG (Hydrobuilder listing); DIG's own page prints the ID as .140 in to .170 in"
    ],
    [
     "1/2 in",
     "0.520 in (13.21 mm)",
     "0.620 in (15.75 mm)",
     "0.050 in",
     "DIG specifications list (13.2 × 15.7 mm)"
    ],
    [
     "1/2 in",
     "0.570 in (14.48 mm)",
     "0.670 in (17.02 mm)",
     "0.050 in",
     "DIG specifications list (14.5 × 17.0 mm)"
    ],
    [
     "1/2 in (the common 'half-inch' / 17 mm)",
     "0.600 in (15.24 mm)",
     "0.700 in (17.78 mm)",
     "0.050 in",
     "DIG specifications list (15.2 × 17.8 mm); Hunter TWPE-700 prints 17.8 × 15.2 mm"
    ],
    [
     "1/2 in",
     "0.620 in (15.75 mm)",
     "0.710 in (18.03 mm)",
     "0.045 in",
     "DIG specifications list (15.6 × 18.0 mm); DIG lists a .615 ID × .710 OD variant too"
    ]
   ]
  }
 },
 "sheet_text": "Drip irrigation tubing sizes: 1/8, 1/4 and 1/2 in poly tubing, ID x OD (0.170 x 0.250, 0.600 x 0.700 in) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/drip-irrigation-tubing-sizes/  (sheet CC BY 4.0)\nBasis: DIG's tubing pages and listings, DripWorks and Hunter's supply tubing page; ID and OD as makers print them, mm = inch × 25.4; numbers only\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Drip tubing is named by a nominal size that is not a measured diameter. 1/4 in micro tubing is 0.170 in ID × 0.250 in OD (4.32 × 6.35 mm) at DripWorks and DIG; DIG's own page prints the 1/4 in ID as a range, .140 in to .170 in. 1/8 in tubing is 0.125 × 0.187 in (DIG). DripWorks says its 1/4 in tubing fits 1/4 in barbed micro fittings and will not fit 1/8 in barbs.\n- 1/2 in 'half-inch' tubing is sold in several ID × OD sizes, so the barbed or compression fitting has to match the tube you own: DIG's specification list shows .520 × .620, .570 × .670, .600 × .700 and .620 × .710 in, and its model table also lists 0.530 × 0.630, 0.580 × 0.690 and .615 × .710 in. The common one, 0.600 in ID × 0.700 in OD (17.8 mm OD), matches Hunter's TWPE-700 (OD 17.8 mm × ID 15.2 mm). DIG prints a 1/2 in operating pressure up to 60 psi (4.2 bar) and wall 0.050 in (0.045 in for the .620 × .710).\n- Barbed fitting dimensions (barb OD, barb length, number of barbs) are not published in any page read: DIG lists its 1/4 in barbed fittings (long barb, tee, elbow, short barb) without sizes, and retailer pages give only the nominal tube size. They are left out, and no barb geometry is drawn. For hose barbs and silicone tube see silicone-tube-and-fittings; for an unthreaded garden-hose connection see garden-hose-thread. 3/4 in and 1 in mainline polyethylene pipe follow IPS / CTS sizes and are not on this page.\n- No file: tubing is a plain ring and the fittings are undefined here. a web search found no McMaster-Carr drip-irrigation category, so none is linked.\n\nnominal size  inside diameter  outside diameter  wall  source\n1/8 in  0.125 in (3.17 mm)  0.187 in (4.75 mm)  —  DIG SKU 12-085 (Hydrobuilder listing)\n1/4 in  0.170 in (4.32 mm)  0.250 in (6.35 mm)  —  DripWorks; DIG (Hydrobuilder listing); DIG's own page prints the ID as .140 in to .170 in\n1/2 in  0.520 in (13.21 mm)  0.620 in (15.75 mm)  0.050 in  DIG specifications list (13.2 × 15.7 mm)\n1/2 in  0.570 in (14.48 mm)  0.670 in (17.02 mm)  0.050 in  DIG specifications list (14.5 × 17.0 mm)\n1/2 in (the common 'half-inch' / 17 mm)  0.600 in (15.24 mm)  0.700 in (17.78 mm)  0.050 in  DIG specifications list (15.2 × 17.8 mm); Hunter TWPE-700 prints 17.8 × 15.2 mm\n1/2 in  0.620 in (15.75 mm)  0.710 in (18.03 mm)  0.045 in  DIG specifications list (15.6 × 18.0 mm); DIG lists a .615 ID × .710 OD variant too\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- DripWorks: 1/4 in polyethylene micro tubing: 0.170 in ID, 0.250 in OD, fits 1/4 in barbed micro fittings and not 1/8 in barbs — web — Retailer listing; numbers only — https://www.dripworks.com/1-4-polyethylene-micro-tubing\n- DIG (listing on Hydrobuilder): DIG 1/4 in polyethylene distribution tubing, black, 0.170 in ID × 0.250 in OD — web — Retailer listing of the maker's product; numbers only — https://hydrobuilder.com/products/dig-1-4-inch-polyethylene-distribution-tubing-black-0-170-inch-id-x-0-250-inch-od-100-feet-pack-of-15\n- DIG (listing on Hydrobuilder): DIG 1/8 in polyethylene distribution tubing, black, 0.125 in ID × 0.187 in OD (SKU 12-085) — web — Retailer listing of the maker's product; numbers only — https://hydrobuilder.com/products/dig-1-8-inch-polyethylene-distribution-tubing-black-0-125-inch-id-x-0-187-inch-od-3000-feet\n- DIG: 1/2 in poly drip tubing: .520 × .620, .570 × .670, .600 × .700, .620 × .710 in (ID × OD) and wall; model table — web — Maker page; numbers only — https://www.digcorp.com/professional-irrigation-products/1-2-poly-drip-tubing/\n- DIG: 1/4 in poly drip tubing and drip line: .140 in to .170 in ID; 1/4 in barbed fittings 25-001 long barb, 25-002 tee, 25-003 elbow, 25-004 short barb (no dimensions) — web — Maker page; ID range only — https://www.digcorp.com/?p=7540\n- Hunter: Supply tubing TWPE-700: OD 17.8 mm × ID 15.2 mm — web — Maker page; numbers only — https://www.hunterirrigation.com/en-metric/irrigation-product/micro-irrigation/supply-tubing\n\nNo true-size file yet: the published figures do not fix the whole shape; a measured scan is planned.\nAPI: https://xemstudio.com/api/geometry?object=drip-irrigation-tubing-sizes\n",
 "sources": [
  {
   "publisher": "DripWorks",
   "title": "1/4 in polyethylene micro tubing: 0.170 in ID, 0.250 in OD, fits 1/4 in barbed micro fittings and not 1/8 in barbs",
   "url": "https://www.dripworks.com/1-4-polyethylene-micro-tubing",
   "formats": [
    "web"
   ],
   "license": "Retailer listing; numbers only",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "DIG (listing on Hydrobuilder)",
   "title": "DIG 1/4 in polyethylene distribution tubing, black, 0.170 in ID × 0.250 in OD",
   "url": "https://hydrobuilder.com/products/dig-1-4-inch-polyethylene-distribution-tubing-black-0-170-inch-id-x-0-250-inch-od-100-feet-pack-of-15",
   "formats": [
    "web"
   ],
   "license": "Retailer listing of the maker's product; numbers only",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "DIG (listing on Hydrobuilder)",
   "title": "DIG 1/8 in polyethylene distribution tubing, black, 0.125 in ID × 0.187 in OD (SKU 12-085)",
   "url": "https://hydrobuilder.com/products/dig-1-8-inch-polyethylene-distribution-tubing-black-0-125-inch-id-x-0-187-inch-od-3000-feet",
   "formats": [
    "web"
   ],
   "license": "Retailer listing of the maker's product; numbers only",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "DIG",
   "title": "1/2 in poly drip tubing: .520 × .620, .570 × .670, .600 × .700, .620 × .710 in (ID × OD) and wall; model table",
   "url": "https://www.digcorp.com/professional-irrigation-products/1-2-poly-drip-tubing/",
   "formats": [
    "web"
   ],
   "license": "Maker page; numbers only",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "DIG",
   "title": "1/4 in poly drip tubing and drip line: .140 in to .170 in ID; 1/4 in barbed fittings 25-001 long barb, 25-002 tee, 25-003 elbow, 25-004 short barb (no dimensions)",
   "url": "https://www.digcorp.com/?p=7540",
   "formats": [
    "web"
   ],
   "license": "Maker page; ID range only",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Hunter",
   "title": "Supply tubing TWPE-700: OD 17.8 mm × ID 15.2 mm",
   "url": "https://www.hunterirrigation.com/en-metric/irrigation-product/micro-irrigation/supply-tubing",
   "formats": [
    "web"
   ],
   "license": "Maker page; numbers only",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "not-scanned",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "silicone-tube",
  "garden-hose-thread",
  "worm-gear-hose-clamps-sae",
  "stepless-ear-clamps",
  "sharkbite-push-to-connect-insertion-depth"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [],
 "faq": [
  {
   "q": "What is the ID and OD of 1/4 inch drip tubing?",
   "a": "0.170 in ID × 0.250 in OD (4.32 × 6.35 mm) at DripWorks and DIG; DIG's page gives the ID as .140 to .170 in."
  },
  {
   "q": "What is the OD of 1/2 inch drip tubing?",
   "a": "Most commonly 0.700 in (17.8 mm) with a 0.600 in (15.2 mm) ID; makers also sell .620, .670 and .710 in OD versions, so match the fitting to the tube."
  },
  {
   "q": "Does 1/4 inch tubing fit 1/8 inch barbs?",
   "a": "No. DripWorks states its 1/4 in tubing fits 1/4 in barbed micro fittings and will not fit standard 1/8 in barbs."
  }
 ],
 "files_license": null,
 "offers": [],
 "markdown": "https://xemstudio.com/objects/drip-irrigation-tubing-sizes/index.md"
}