{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "gear-sector-amplifier",
 "name": "3D printable gear-sector amplifier: 6:1 sector-and-pinion pointer mechanism (STL, STEP)",
 "kind": "hardware",
 "category": "Mechanisms",
 "group": "Gears",
 "year": null,
 "question": "How do I amplify a small rotation with a gear sector and pinion?",
 "tags": [
  "gear sector",
  "sector gear",
  "pinion",
  "amplifier",
  "pointer",
  "dial indicator",
  "mechanism",
  "stl"
 ],
 "aliases": [
  "sector gear amplifier",
  "segment gear and pinion",
  "motion amplifier mechanism",
  "pointer amplifier",
  "dial gauge mechanism 3d print"
 ],
 "overall_mm": {
  "length": 159.3,
  "width": 92,
  "height": 12.2
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 5,
 "url": "https://xemstudio.com/objects/gear-sector-amplifier/",
 "sheet_txt": "https://xemstudio.com/objects/gear-sector-amplifier/sheet.txt",
 "sheet": {
  "basis": "Gear-sector amplifier: designed for 3D printing, exact nominal mm.",
  "overall_mm": {
   "length": 159.3,
   "width": 92,
   "height": 12.2
  },
  "notes": [
   "Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: sector-amp-assembled.",
   "Resize: Gears scale by the module m (pitch Ø = m·z, centre distance = m·(z₁ + z₂)/2): keep the tooth counts so the ratio stays, and choose a standard module (0.5, 0.8, 1, 1.25, 1.5, 2, 2.5, 3).",
   "Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.",
   "Ratio 72:12 = 6:1; centre distance 63.3 (63 nominal + 0.3 backlash).",
   "Sector teeth span 50 degrees; stop pins limit the lever to about ±12 degrees so it never runs out of mesh.",
   "Pointer keys on the pinion's 8 mm square boss (8.4 mm hole).",
   "Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid."
  ],
  "table": {
   "columns": [
    "file",
    "what",
    "overall mm"
   ],
   "rows": [
    [
     "sector-amp-assembled",
     "assembled: 4 parts in place",
     "159.3 × 92 × 12.2"
    ],
    [
     "sector-amp-base",
     "sector amp base",
     "159.3 × 92 × 12.2"
    ],
    [
     "sector-amp-sector",
     "sector amp sector",
     "97.497 × 46.908 × 5"
    ],
    [
     "sector-amp-pinion",
     "sector amp pinion",
     "20.979 × 20.979 × 9"
    ],
    [
     "sector-amp-pointer",
     "sector amp pointer",
     "47 × 14 × 2"
    ]
   ]
  }
 },
 "sheet_text": "3D printable gear-sector amplifier: 6:1 sector-and-pinion pointer mechanism (STL, STEP) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/gear-sector-amplifier/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Gear-sector amplifier: designed for 3D printing, exact nominal mm.\nCatalog version: 2026-10-20\n\nOverall (mm): length 159.3, width 92.0, height 12.2\n- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: sector-amp-assembled.\n- Resize: Gears scale by the module m (pitch Ø = m·z, centre distance = m·(z₁ + z₂)/2): keep the tooth counts so the ratio stays, and choose a standard module (0.5, 0.8, 1, 1.25, 1.5, 2, 2.5, 3).\n- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.\n- Ratio 72:12 = 6:1; centre distance 63.3 (63 nominal + 0.3 backlash).\n- Sector teeth span 50 degrees; stop pins limit the lever to about ±12 degrees so it never runs out of mesh.\n- Pointer keys on the pinion's 8 mm square boss (8.4 mm hole).\n- Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid.\n\nfile  what  overall mm\nsector-amp-assembled  assembled: 4 parts in place  159.3 × 92 × 12.2\nsector-amp-base  sector amp base  159.3 × 92 × 12.2\nsector-amp-sector  sector amp sector  97.497 × 46.908 × 5\nsector-amp-pinion  sector amp pinion  20.979 × 20.979 × 9\nsector-amp-pointer  sector amp pointer  47 × 14 × 2\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Wikipedia: Gear — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Gear\n- Wikipedia: Indicator (distance amplifying instrument) — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Indicator_(distance_amplifying_instrument)\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 5 parts): https://xemstudio.com/files/mechanisms/gear-sector-amplifier/index.json\nAPI: https://xemstudio.com/api/geometry?object=gear-sector-amplifier\n",
 "sources": [
  {
   "publisher": "Wikipedia",
   "title": "Gear",
   "url": "https://en.wikipedia.org/wiki/Gear",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Wikipedia",
   "title": "Indicator (distance amplifying instrument)",
   "url": "https://en.wikipedia.org/wiki/Indicator_(distance_amplifying_instrument)",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "printable-spur-gears-and-racks-module-2",
  "rack-and-pinion-spring-padlock",
  "l-rod-right-angle-drive"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "mesh",
   "exact": "module 1.5, 72:12",
   "mates": "sector and pinion",
   "fit": "designed",
   "files": "gears"
  },
  {
   "feature": "pointer",
   "exact": "8.4 square hole",
   "mates": "8 square boss",
   "fit": "slide",
   "files": "pointer"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What is the ratio?",
   "a": "6:1: sector 72-tooth pitch circle, pinion 12 teeth."
  },
  {
   "q": "Why a sector, not a full gear?",
   "a": "Only a small arc of teeth is ever used, so the rest is cut away."
  },
  {
   "q": "Can I change the ratio?",
   "a": "Yes, with a different pinion; keep centre distance = 1.5 × (72 + z) / 2 + 0.3."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "sector-amp-assembled",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-assembled.step",
   "stl": "https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-assembled.stl",
   "note": "sector amp assembly"
  },
  {
   "file": "sector-amp-base",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-base.step",
   "stl": "https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-base.stl",
   "note": "sector amp base"
  },
  {
   "file": "sector-amp-sector",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-sector.step",
   "stl": "https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-sector.stl",
   "note": "sector amp sector"
  },
  {
   "file": "sector-amp-pinion",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-pinion.step",
   "stl": "https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-pinion.stl",
   "note": "sector amp pinion"
  },
  {
   "file": "sector-amp-pointer",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-pointer.step",
   "stl": "https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-pointer.stl",
   "note": "sector amp pointer"
  }
 ],
 "markdown": "https://xemstudio.com/objects/gear-sector-amplifier/index.md"
}