{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "handwheels-din-950-gn-322",
 "name": "Hand wheels DIN 950 (cast iron) and GN 322 (aluminium): diameter, bore H7, hub, rim width, length, handle, 80 to 250 mm",
 "kind": "standard",
 "category": "Hardware",
 "group": "Knobs, handles & feet",
 "year": null,
 "question": "What are the dimensions of a DIN 950 or GN 322 spoked handwheel: wheel diameter, bore, hub diameter, hub length, overall height and handle position?",
 "tags": [
  "handwheel",
  "hand wheel",
  "din 950",
  "gn 322",
  "spoked",
  "cast iron",
  "aluminium",
  "bore",
  "hub",
  "module"
 ],
 "aliases": [
  "din 950",
  "din 950 handwheel",
  "gn 322",
  "gn 322 handwheel",
  "spoked handwheel dimensions",
  "handwheel 160 mm",
  "handwheel 200 mm bore 20",
  "hand wheel 125 mm bore 12",
  "handwheel bore keyway din 6885",
  "handwheel hub diameter",
  "handwheel with revolving handle",
  "hand wheel cast iron",
  "aluminium handwheel 250",
  "handwheel d1 d2 d3 l1 l2"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "not-scanned",
 "les": false,
 "free_files": 0,
 "url": "https://xemstudio.com/objects/handwheels-din-950-gn-322/",
 "sheet_txt": "https://xemstudio.com/objects/handwheels-din-950-gn-322/sheet.txt",
 "sheet": {
  "basis": "Elesa-Ganter DIN 950 and GN 322 sheets, cross-checked against Maedler's DIN 950 sheet (hub, lengths) and Monroe Engineering's GN 322 inch sheet",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Spoked handwheels (hand wheels) for shafts and spindles: DIN 950 in cast iron (GG, turned and polished rim; 3 spokes up to 200 mm and 5 at 250 mm in the Elesa 2019 sheet) and the Ganter GN 322 in aluminium (rim turned and polished, run-out under 0.4 mm). Both have an H7 reamed bore, plain (B) or with a keyway to DIN 6885/1 with P9 (K). Type A has no handle, type D (DIN 950) or R (GN 322) a revolving handle: DIN 950-D takes a threaded handle (M6 to M12 in d4), GN 322 the GN 798 revolving handle (Ø22 to Ø25).",
   "What the letters mean: Elesa's 2019 DIN 950 sheet prints d1 (wheel), d2 H7 (bore), d3, b, l1, l2. Maedler's DIN 950 sheet (K43_865) gives for the same wheels d3 as the hub diameter, l1 as the hub length 'complying with DIN 950' and l2 as the overall length; its numbers equal Elesa's d3, l1 and l2 for the rows read (80, 100, 125 and 140 mm); b is read as the rim width (the Maedler drawing labels b1 as the rim width on its sister sheet K43_862). For GN 322 Monroe's inch sheet prints D = wheel, L = 33 (= l2), B = 15 (= b), d1 = 31 (= d3) and h = 18 (= l1) for the 125 mm size, which fixes the meaning. Elesa's newer (2/2026) DIN 950 sheet uses a different letter set (its example row prints 14 as d3 and 24 as d4), so letters from that sheet are not used; the numbers here follow the 2019 sheet and Maedler.",
   "Where not stated: the number of spokes for GN 322 is not on the sheets read (not shown), the DIN 950 spoke and rim profile is not published as numbers, and DIN 950 aluminium (AL) and square-bore (V) versions and sizes 315 to 500 mm are on Elesa's 2026 sheet but could not be read as a table. The keyway and bore columns apply to both wheel types; the available bores per wheel Ø are the two shown in the sheets (the inch bores are Monroe's: GN 322-125 with 1/2 in, 140 to 200 with 5/8 in, 250 with 3/4 in).",
   "Numbers only: a handwheel's rim and spoke cross-sections are not given as numbers, so no file is made. Hub (d3 × l1), bore, overall height and handle position are enough to model a stand-in disc and a hub; the keyway is a DIN 6885 slot (see the parallel keys page)."
  ],
  "table": {
   "columns": [
    "series",
    "wheel Ø d1, mm",
    "bore d2 (H7) options, mm",
    "hub Ø d3, mm",
    "rim width b, mm",
    "hub length l1, mm",
    "overall height l2, mm",
    "spokes",
    "revolving handle (type D / R): thread or Ø, l3, r, mm"
   ],
   "rows": [
    [
     "DIN 950 cast iron",
     "80",
     "10, 12",
     "24",
     "14",
     "16",
     "29",
     "3",
     "M6, l3 53, r 27"
    ],
    [
     "DIN 950 cast iron",
     "100",
     "10, 12",
     "26",
     "15",
     "17",
     "33",
     "3",
     "M6, l3 53, r 36"
    ],
    [
     "DIN 950 cast iron",
     "125",
     "12, 14",
     "28",
     "16",
     "18",
     "36",
     "3",
     "M8, l3 65, r 47"
    ],
    [
     "DIN 950 cast iron",
     "140",
     "14, 16",
     "30",
     "17",
     "19",
     "39",
     "3",
     "M8, l3 65, r 52"
    ],
    [
     "DIN 950 cast iron",
     "160",
     "14, 16",
     "33",
     "18",
     "20",
     "40",
     "3",
     "M10, l3 80, r 62"
    ],
    [
     "DIN 950 cast iron",
     "200",
     "18, 20",
     "38",
     "22",
     "24",
     "45",
     "3",
     "M10, l3 80, r 80"
    ],
    [
     "DIN 950 cast iron",
     "250",
     "22, 26",
     "45",
     "26",
     "28",
     "50",
     "5",
     "M12, l3 102, r 101"
    ],
    [
     "GN 322 aluminium",
     "125",
     "12, 14 (inch: 1/2 in, Monroe)",
     "31",
     "15",
     "18",
     "33",
     "not stated",
     "GN 798 Ø22, l3 61.5, r 54"
    ],
    [
     "GN 322 aluminium",
     "140",
     "14, 16 (inch: 5/8 in, Monroe)",
     "36",
     "16.5",
     "19",
     "36",
     "not stated",
     "GN 798 Ø24, l3 76.5, r 61"
    ],
    [
     "GN 322 aluminium",
     "160",
     "14, 16 (inch: 5/8 in, Monroe)",
     "36",
     "18",
     "20",
     "39",
     "not stated",
     "GN 798 Ø24, l3 76.5, r 71"
    ],
    [
     "GN 322 aluminium",
     "200",
     "18, 20 (inch: 5/8 in, Monroe)",
     "42",
     "20.5",
     "24",
     "45",
     "not stated",
     "GN 798 Ø25, l3 86.5, r 89"
    ],
    [
     "GN 322 aluminium",
     "250",
     "22, 26 (inch: 3/4 in, Monroe)",
     "48",
     "23",
     "28",
     "51",
     "not stated",
     "GN 798 Ø25, l3 86.5, r 113"
    ]
   ]
  }
 },
 "sheet_text": "Hand wheels DIN 950 (cast iron) and GN 322 (aluminium): diameter, bore H7, hub, rim width, length, handle, 80 to 250 mm — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/handwheels-din-950-gn-322/  (sheet CC BY 4.0)\nBasis: Elesa-Ganter DIN 950 and GN 322 sheets, cross-checked against Maedler's DIN 950 sheet (hub, lengths) and Monroe Engineering's GN 322 inch sheet\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Spoked handwheels (hand wheels) for shafts and spindles: DIN 950 in cast iron (GG, turned and polished rim; 3 spokes up to 200 mm and 5 at 250 mm in the Elesa 2019 sheet) and the Ganter GN 322 in aluminium (rim turned and polished, run-out under 0.4 mm). Both have an H7 reamed bore, plain (B) or with a keyway to DIN 6885/1 with P9 (K). Type A has no handle, type D (DIN 950) or R (GN 322) a revolving handle: DIN 950-D takes a threaded handle (M6 to M12 in d4), GN 322 the GN 798 revolving handle (Ø22 to Ø25).\n- What the letters mean: Elesa's 2019 DIN 950 sheet prints d1 (wheel), d2 H7 (bore), d3, b, l1, l2. Maedler's DIN 950 sheet (K43_865) gives for the same wheels d3 as the hub diameter, l1 as the hub length 'complying with DIN 950' and l2 as the overall length; its numbers equal Elesa's d3, l1 and l2 for the rows read (80, 100, 125 and 140 mm); b is read as the rim width (the Maedler drawing labels b1 as the rim width on its sister sheet K43_862). For GN 322 Monroe's inch sheet prints D = wheel, L = 33 (= l2), B = 15 (= b), d1 = 31 (= d3) and h = 18 (= l1) for the 125 mm size, which fixes the meaning. Elesa's newer (2/2026) DIN 950 sheet uses a different letter set (its example row prints 14 as d3 and 24 as d4), so letters from that sheet are not used; the numbers here follow the 2019 sheet and Maedler.\n- Where not stated: the number of spokes for GN 322 is not on the sheets read (not shown), the DIN 950 spoke and rim profile is not published as numbers, and DIN 950 aluminium (AL) and square-bore (V) versions and sizes 315 to 500 mm are on Elesa's 2026 sheet but could not be read as a table. The keyway and bore columns apply to both wheel types; the available bores per wheel Ø are the two shown in the sheets (the inch bores are Monroe's: GN 322-125 with 1/2 in, 140 to 200 with 5/8 in, 250 with 3/4 in).\n- Numbers only: a handwheel's rim and spoke cross-sections are not given as numbers, so no file is made. Hub (d3 × l1), bore, overall height and handle position are enough to model a stand-in disc and a hub; the keyway is a DIN 6885 slot (see the parallel keys page).\n\nseries  wheel Ø d1, mm  bore d2 (H7) options, mm  hub Ø d3, mm  rim width b, mm  hub length l1, mm  overall height l2, mm  spokes  revolving handle (type D / R): thread or Ø, l3, r, mm\nDIN 950 cast iron  80  10, 12  24  14  16  29  3  M6, l3 53, r 27\nDIN 950 cast iron  100  10, 12  26  15  17  33  3  M6, l3 53, r 36\nDIN 950 cast iron  125  12, 14  28  16  18  36  3  M8, l3 65, r 47\nDIN 950 cast iron  140  14, 16  30  17  19  39  3  M8, l3 65, r 52\nDIN 950 cast iron  160  14, 16  33  18  20  40  3  M10, l3 80, r 62\nDIN 950 cast iron  200  18, 20  38  22  24  45  3  M10, l3 80, r 80\nDIN 950 cast iron  250  22, 26  45  26  28  50  5  M12, l3 102, r 101\nGN 322 aluminium  125  12, 14 (inch: 1/2 in, Monroe)  31  15  18  33  not stated  GN 798 Ø22, l3 61.5, r 54\nGN 322 aluminium  140  14, 16 (inch: 5/8 in, Monroe)  36  16.5  19  36  not stated  GN 798 Ø24, l3 76.5, r 61\nGN 322 aluminium  160  14, 16 (inch: 5/8 in, Monroe)  36  18  20  39  not stated  GN 798 Ø24, l3 76.5, r 71\nGN 322 aluminium  200  18, 20 (inch: 5/8 in, Monroe)  42  20.5  24  45  not stated  GN 798 Ø25, l3 86.5, r 89\nGN 322 aluminium  250  22, 26 (inch: 3/4 in, Monroe)  48  23  28  51  not stated  GN 798 Ø25, l3 86.5, r 113\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Elesa-Ganter: DIN 950 spoked handwheels (cast iron), A and D types: d1, d2 H7, d3, b, l1, l2, d4, l3, r, spokes (Models catalogue p. 130-131, 11/2019) — web — Publisher's page; dimensions are facts — https://www.elesa.com/siteassets/PDF/PDF_EN/DIN 950.pdf\n- Maedler (Mercateo data sheet): K43_865: spoked handwheels DIN 950: d1, d3 (hub), l2, l1 (hub length per DIN 950) — web — Publisher's page; dimensions are facts — https://static.mercateo.com/38/e2d28082af85416a8a9b3a6f8a237259/pdf/K43_865_EN.pdf\n- Ganter Norm: GN 322 spoked handwheels, aluminium, plain or with revolving handle GN 798: d1, d2 H7, b, d3, l1, l2, l3, r, handle Ø — web — Publisher's page; dimensions are facts — https://ganternorm.com/en/products/1.3-Adjusting-with-handwheels-and-cranks/Spoked-handwheels/GN-322-Spoked-Handwheels-Plain-Rim-Polished\n- Elesa-Ganter: GN 322 spoked handwheels (2/2026 sheet): same table, aluminium body, bore H7, B plain / K keyway DIN 6885-1 P9 — web — Publisher's page; dimensions are facts — https://www.elesa-ganter.com/siteassets/PDF/EN/GN 322.pdf\n- Monroe Engineering: GN 322-A spoked handwheels with inch bores (1/2, 5/8, 3/4): D, L, B, d1, h — web — Publisher's page; dimensions are facts — https://catalog.monroeengineering.com/Asset/GN-322-A-Spoked-Handwheels.pdf\n\nNo true-size file yet: the published figures do not fix the whole shape; a measured scan is planned.\nAPI: https://xemstudio.com/api/geometry?object=handwheels-din-950-gn-322\n",
 "sources": [
  {
   "publisher": "Elesa-Ganter",
   "title": "DIN 950 spoked handwheels (cast iron), A and D types: d1, d2 H7, d3, b, l1, l2, d4, l3, r, spokes (Models catalogue p. 130-131, 11/2019)",
   "url": "https://www.elesa.com/siteassets/PDF/PDF_EN/DIN 950.pdf",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Maedler (Mercateo data sheet)",
   "title": "K43_865: spoked handwheels DIN 950: d1, d3 (hub), l2, l1 (hub length per DIN 950)",
   "url": "https://static.mercateo.com/38/e2d28082af85416a8a9b3a6f8a237259/pdf/K43_865_EN.pdf",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Ganter Norm",
   "title": "GN 322 spoked handwheels, aluminium, plain or with revolving handle GN 798: d1, d2 H7, b, d3, l1, l2, l3, r, handle Ø",
   "url": "https://ganternorm.com/en/products/1.3-Adjusting-with-handwheels-and-cranks/Spoked-handwheels/GN-322-Spoked-Handwheels-Plain-Rim-Polished",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Elesa-Ganter",
   "title": "GN 322 spoked handwheels (2/2026 sheet): same table, aluminium body, bore H7, B plain / K keyway DIN 6885-1 P9",
   "url": "https://www.elesa-ganter.com/siteassets/PDF/EN/GN 322.pdf",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Monroe Engineering",
   "title": "GN 322-A spoked handwheels with inch bores (1/2, 5/8, 3/4): D, L, B, d1, h",
   "url": "https://catalog.monroeengineering.com/Asset/GN-322-A-Spoked-Handwheels.pdf",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "not-scanned",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "star-knobs-din-6336",
  "ball-knobs-din-319",
  "fixed-handles-din-39",
  "parallel-keys-din-6885",
  "adjustable-clamping-levers-gn-300",
  "cam-levers-gn-927",
  "hand-lever-60-bore6"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "bore d2 (H7)",
   "exact": "Ø10 to Ø26 by wheel size (e.g. Ø18 or Ø20 on the 200 mm wheel)",
   "mates": "a shaft of the same nominal diameter; Elesa lists B (plain) and K (keyway)",
   "fit": "slide",
   "files": "all"
  },
  {
   "feature": "keyway (type K)",
   "exact": "DIN 6885/1, P9",
   "mates": "the parallel key of the shaft (see parallel keys DIN 6885)",
   "fit": "slide",
   "files": "all"
  },
  {
   "feature": "handle thread d4 (DIN 950-D)",
   "exact": "M6 (80, 100 mm), M8 (125, 140), M10 (160, 200), M12 (250)",
   "mates": "the threaded stud of the fixed or revolving handle",
   "fit": "designed",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What are the dimensions of a DIN 950 handwheel 160 mm?",
   "a": "Bore 14 or 16 H7, hub Ø33 × 20, rim width 18, overall height 40, three spokes; the D type takes an M10 handle."
  },
  {
   "q": "What is the bore tolerance of a DIN 950 handwheel?",
   "a": "H7, plain (B) or with a keyway to DIN 6885/1, P9 (K)."
  },
  {
   "q": "What are the dimensions of a GN 322 handwheel 200 mm?",
   "a": "Bore 18 or 20 H7, rim width 20.5, hub Ø42 × 24, overall height 45, GN 798 handle Ø25 at radius 89."
  }
 ],
 "files_license": null,
 "offers": [],
 "markdown": "https://xemstudio.com/objects/handwheels-din-950-gn-322/index.md"
}