{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "hiwin-mgn-miniature-guideway-mgn5-mgn15",
 "name": "HIWIN MGN miniature linear guideway: MGNR5, 7, 9, 12, 15 rails and MGN7, 9, 12, 15 C / H blocks (width, height, hole pitch, counterbore, mounting holes)",
 "kind": "standard",
 "category": "Hardware",
 "group": "Bearings, rails & motion",
 "year": null,
 "question": "What are the dimensions of HIWIN MGN5, MGN7, MGN9, MGN12 and MGN15 rails and MGN7C / MGN7H blocks: rail width and height, hole pitch, counterbore, block mounting holes and length?",
 "tags": [
  "hiwin",
  "mgn7",
  "mgn5",
  "mgn",
  "miniature linear rail",
  "linear guide",
  "rail",
  "carriage",
  "block",
  "standard"
 ],
 "aliases": [
  "mgn7 dimensions",
  "mgn7h",
  "mgn7c",
  "mgn5 rail",
  "mgnr7",
  "mgn9 rail hole pitch",
  "mgn12 rail",
  "mgn15 rail",
  "mgn7 mounting holes",
  "mgn rail counterbore",
  "mgn7 rail 4.8 mm high",
  "mgn15 block holes",
  "hiwin miniature guideway sizes",
  "mgn rail screw length"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "not-scanned",
 "les": false,
 "free_files": 0,
 "url": "https://xemstudio.com/objects/hiwin-mgn-miniature-guideway-mgn5-mgn15/",
 "sheet_txt": "https://xemstudio.com/objects/hiwin-mgn-miniature-guideway-mgn5-mgn15/sheet.txt",
 "sheet": {
  "basis": "HIWIN MG Series 2025 and MGN / MGW 2023 catalogs, read independently; the only difference (rail screw length) is shown",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "HIWIN MGN is the miniature profile-rail family: MGNR rail with an MGNC (standard, short) or MGNH (long) block; MGN5 rails and small blocks are for micro mechanisms, MGN9, 12 and 15 are the 3D-printer / CNC sizes. Letters as in HIWIN's catalog: W / WR width, H / HR height (H from the rail bottom to the block top), B x C the four block holes (B across, C along), L1 body length, L overall length, N distance from the rail side to the block side, H1 clearance under the block, D x h x d the rail counterbore, P the hole pitch, E the end distance.",
   "Numbers: two HIWIN catalogs, read independently, agree on all of this: the MG Series 2025 catalog (Motion Industries copy) and the MGN and MGW product catalog 2023 (Damen CNC copy). They differ only in the rail mounting screw: M2 x 6 / M2 x 6 (MGN5, special screw), M2 x 6 / M2 x 8 (MGN7), M3 x 8 / M3 x 10 (MGN9, 12), M3 x 10 / M3 x 12 (MGN15): the first is the MG Series 2025 value, the second the 2023 catalog. Both are shown. The 2023 catalog also prints the allowed end distance range E1/2 (4 to 11 on MGNR5 up to 6 to 34 on MGNR15) and the maximum rail length; the 2025 catalog prints E as a single standard value (5 / 5 / 7.5 / 10 / 15).",
   "What is new on this site: MGN5 and MGN7 rails and the MGN7 blocks, the block's H1, N and B1, the rail end-distance range and screw lengths. The existing mgn-linear-rails page holds the MGN9 / 12 / 15 rail and block envelopes as files; its rail and block values match this table (rail 9 x 6.5, 12 x 8, 15 x 10 with the same hole pitches; MGN9C L 28.9 and 9H 39.9, 12C 34.7 and 12H 45.4, 15H 58.8). MGN5 blocks (MGN5C-O / 5H-O outer-recirculation) are not shown: the MG 2025 text reads only partly (H 6, W 12, B 8, L 16 for the C-O block).",
   "Numbers only for the new sizes, no CAD files: the catalog prints the envelope and the hole pattern, not the rail groove or the block section. Use HIWIN's CAD data for the real shape (linked under sources). The wide MGW series is not covered.",
   "Left out: MGN5 blocks, MGW (wide) rails and blocks, accuracy classes, load ratings, weights of blocks."
  ],
  "table": {
   "columns": [
    "part",
    "width W / WR, mm",
    "height H / HR, mm",
    "length L (block), mm",
    "block holes B x C, mm / rail pitch P, mm",
    "thread / rail bolt (two catalogs)",
    "rail counterbore D x h, through d, mm",
    "rail end distance E (standard), allowed range / block other dimensions"
   ],
   "rows": [
    [
     "MGNR5R rail",
     "5",
     "3.6",
     "max 250 per piece",
     "P 15",
     "M2 x 6 / M2 x 6 (special screw)",
     "D 3.6 x h 0.8, d 2.4",
     "E 5; E1/2 4 to 11; 0.15 kg/m"
    ],
    [
     "MGNR7R rail",
     "7",
     "4.8",
     "max 600 per piece",
     "P 15",
     "M2 x 6 / M2 x 8",
     "D 4.2 x h 2.3, d 2.4",
     "E 5; E1/2 5 to 12; 0.22 kg/m"
    ],
    [
     "MGNR9R rail",
     "9",
     "6.5",
     "max 1200 per piece",
     "P 20",
     "M3 x 8 / M3 x 10",
     "D 6 x h 3.5, d 3.5",
     "E 7.5; E1/2 5 to 15; 0.38 kg/m"
    ],
    [
     "MGNR12R rail",
     "12",
     "8",
     "max 2000 per piece",
     "P 25",
     "M3 x 8 / M3 x 10",
     "D 6 x h 4.5, d 3.5",
     "E 10; E1/2 5 to 20; 0.65 kg/m"
    ],
    [
     "MGNR15R rail",
     "15",
     "10",
     "max 2000 per piece",
     "P 40",
     "M3 x 10 / M3 x 12",
     "D 6 x h 4.5, d 3.5",
     "E 15; E1/2 6 to 34; 1.06 kg/m"
    ],
    [
     "MGN7C block, standard",
     "17",
     "8",
     "22.5",
     "B 12 x C 8",
     "M2 x 2.5 (blind)",
     "—",
     "H1 1.5, N 5, B1 2.5, L1 13.5, grease hole Ø1.2, H2 1.5"
    ],
    [
     "MGN7H block, long",
     "17",
     "8",
     "30.8",
     "B 12 x C 13",
     "M2 x 2.5 (blind)",
     "—",
     "H1 1.5, N 5, B1 2.5, L1 21.8, grease hole Ø1.2, H2 1.5"
    ],
    [
     "MGN9C block, standard",
     "20",
     "10",
     "28.9",
     "B 15 x C 10",
     "M3 x 3 (blind)",
     "—",
     "H1 2, N 5.5, B1 2.5, L1 18.9, grease hole Ø1.4, H2 1.8"
    ],
    [
     "MGN9H block, long",
     "20",
     "10",
     "39.9",
     "B 15 x C 16",
     "M3 x 3 (blind)",
     "—",
     "H1 2, N 5.5, B1 2.5, L1 29.9, grease hole Ø1.4, H2 1.8"
    ],
    [
     "MGN12C block, standard",
     "27",
     "13",
     "34.7",
     "B 20 x C 15",
     "M3 x 3.5 (blind)",
     "—",
     "H1 3, N 7.5, B1 3.5, L1 21.7, grease hole Ø2, H2 2.5"
    ],
    [
     "MGN12H block, long",
     "27",
     "13",
     "45.4",
     "B 20 x C 20",
     "M3 x 3.5 (blind)",
     "—",
     "H1 3, N 7.5, B1 3.5, L1 32.4, grease hole Ø2, H2 2.5"
    ],
    [
     "MGN15C block, standard",
     "32",
     "16",
     "42.1",
     "B 25 x C 20",
     "M3 x 4 (blind)",
     "—",
     "H1 4, N 8.5, B1 3.5, L1 26.7, grease hole M3 (G 4.5), H2 3"
    ],
    [
     "MGN15H block, long",
     "32",
     "16",
     "58.8",
     "B 25 x C 25",
     "M3 x 4 (blind)",
     "—",
     "H1 4, N 8.5, B1 3.5, L1 43.4, grease hole M3 (G 4.5), H2 3"
    ]
   ]
  }
 },
 "sheet_text": "HIWIN MGN miniature linear guideway: MGNR5, 7, 9, 12, 15 rails and MGN7, 9, 12, 15 C / H blocks (width, height, hole pitch, counterbore, mounting holes) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/hiwin-mgn-miniature-guideway-mgn5-mgn15/  (sheet CC BY 4.0)\nBasis: HIWIN MG Series 2025 and MGN / MGW 2023 catalogs, read independently; the only difference (rail screw length) is shown\nCatalog version: 2026-10-20\n\nSizes: see table below\n- HIWIN MGN is the miniature profile-rail family: MGNR rail with an MGNC (standard, short) or MGNH (long) block; MGN5 rails and small blocks are for micro mechanisms, MGN9, 12 and 15 are the 3D-printer / CNC sizes. Letters as in HIWIN's catalog: W / WR width, H / HR height (H from the rail bottom to the block top), B x C the four block holes (B across, C along), L1 body length, L overall length, N distance from the rail side to the block side, H1 clearance under the block, D x h x d the rail counterbore, P the hole pitch, E the end distance.\n- Numbers: two HIWIN catalogs, read independently, agree on all of this: the MG Series 2025 catalog (Motion Industries copy) and the MGN and MGW product catalog 2023 (Damen CNC copy). They differ only in the rail mounting screw: M2 x 6 / M2 x 6 (MGN5, special screw), M2 x 6 / M2 x 8 (MGN7), M3 x 8 / M3 x 10 (MGN9, 12), M3 x 10 / M3 x 12 (MGN15): the first is the MG Series 2025 value, the second the 2023 catalog. Both are shown. The 2023 catalog also prints the allowed end distance range E1/2 (4 to 11 on MGNR5 up to 6 to 34 on MGNR15) and the maximum rail length; the 2025 catalog prints E as a single standard value (5 / 5 / 7.5 / 10 / 15).\n- What is new on this site: MGN5 and MGN7 rails and the MGN7 blocks, the block's H1, N and B1, the rail end-distance range and screw lengths. The existing mgn-linear-rails page holds the MGN9 / 12 / 15 rail and block envelopes as files; its rail and block values match this table (rail 9 x 6.5, 12 x 8, 15 x 10 with the same hole pitches; MGN9C L 28.9 and 9H 39.9, 12C 34.7 and 12H 45.4, 15H 58.8). MGN5 blocks (MGN5C-O / 5H-O outer-recirculation) are not shown: the MG 2025 text reads only partly (H 6, W 12, B 8, L 16 for the C-O block).\n- Numbers only for the new sizes, no CAD files: the catalog prints the envelope and the hole pattern, not the rail groove or the block section. Use HIWIN's CAD data for the real shape (linked under sources). The wide MGW series is not covered.\n- Left out: MGN5 blocks, MGW (wide) rails and blocks, accuracy classes, load ratings, weights of blocks.\n\npart  width W / WR, mm  height H / HR, mm  length L (block), mm  block holes B x C, mm / rail pitch P, mm  thread / rail bolt (two catalogs)  rail counterbore D x h, through d, mm  rail end distance E (standard), allowed range / block other dimensions\nMGNR5R rail  5  3.6  max 250 per piece  P 15  M2 x 6 / M2 x 6 (special screw)  D 3.6 x h 0.8, d 2.4  E 5; E1/2 4 to 11; 0.15 kg/m\nMGNR7R rail  7  4.8  max 600 per piece  P 15  M2 x 6 / M2 x 8  D 4.2 x h 2.3, d 2.4  E 5; E1/2 5 to 12; 0.22 kg/m\nMGNR9R rail  9  6.5  max 1200 per piece  P 20  M3 x 8 / M3 x 10  D 6 x h 3.5, d 3.5  E 7.5; E1/2 5 to 15; 0.38 kg/m\nMGNR12R rail  12  8  max 2000 per piece  P 25  M3 x 8 / M3 x 10  D 6 x h 4.5, d 3.5  E 10; E1/2 5 to 20; 0.65 kg/m\nMGNR15R rail  15  10  max 2000 per piece  P 40  M3 x 10 / M3 x 12  D 6 x h 4.5, d 3.5  E 15; E1/2 6 to 34; 1.06 kg/m\nMGN7C block, standard  17  8  22.5  B 12 x C 8  M2 x 2.5 (blind)  —  H1 1.5, N 5, B1 2.5, L1 13.5, grease hole Ø1.2, H2 1.5\nMGN7H block, long  17  8  30.8  B 12 x C 13  M2 x 2.5 (blind)  —  H1 1.5, N 5, B1 2.5, L1 21.8, grease hole Ø1.2, H2 1.5\nMGN9C block, standard  20  10  28.9  B 15 x C 10  M3 x 3 (blind)  —  H1 2, N 5.5, B1 2.5, L1 18.9, grease hole Ø1.4, H2 1.8\nMGN9H block, long  20  10  39.9  B 15 x C 16  M3 x 3 (blind)  —  H1 2, N 5.5, B1 2.5, L1 29.9, grease hole Ø1.4, H2 1.8\nMGN12C block, standard  27  13  34.7  B 20 x C 15  M3 x 3.5 (blind)  —  H1 3, N 7.5, B1 3.5, L1 21.7, grease hole Ø2, H2 2.5\nMGN12H block, long  27  13  45.4  B 20 x C 20  M3 x 3.5 (blind)  —  H1 3, N 7.5, B1 3.5, L1 32.4, grease hole Ø2, H2 2.5\nMGN15C block, standard  32  16  42.1  B 25 x C 20  M3 x 4 (blind)  —  H1 4, N 8.5, B1 3.5, L1 26.7, grease hole M3 (G 4.5), H2 3\nMGN15H block, long  32  16  58.8  B 25 x C 25  M3 x 4 (blind)  —  H1 4, N 8.5, B1 3.5, L1 43.4, grease hole M3 (G 4.5), H2 3\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- HIWIN (MG Series 2025, hosted by Motion Industries): MG series miniature guideway: MGN C / H block table, MGNR rail table (MGN5, 7, 9, 12, 15) — web — Publisher's page; dimensions are facts — https://s3.amazonaws.com/www.motionusa.com/hiwin/2025/MG Series-2025.pdf\n- HIWIN (MGN and MGW product catalog 2023, hosted by Damen CNC): Table 3.79 block dimensions (MGN07 to MGN15) and Table 3.81 rail dimensions (MGNR05 to MGNR15, min / max end distance, assembly screw) — web — Publisher's page; dimensions are facts — https://damencnc.com/userdata/file/3455-3_HIWIN_MGN_and_MGW_Product_Catalog_2023.pdf\n- HIWIN: MGN / MGW miniature guideway product page (HIWIN CAD data is offered from the maker's site; check HIWIN's terms) — STEP, PDF — HIWIN site terms [verify license at link] — https://www.hiwin.com/en/products/linear-guideways/mgn-mgw-series\n\nNo true-size file yet: the published figures do not fix the whole shape; a measured scan is planned.\nAPI: https://xemstudio.com/api/geometry?object=hiwin-mgn-miniature-guideway-mgn5-mgn15\n",
 "sources": [
  {
   "publisher": "HIWIN (MG Series 2025, hosted by Motion Industries)",
   "title": "MG series miniature guideway: MGN C / H block table, MGNR rail table (MGN5, 7, 9, 12, 15)",
   "url": "https://s3.amazonaws.com/www.motionusa.com/hiwin/2025/MG Series-2025.pdf",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "HIWIN (MGN and MGW product catalog 2023, hosted by Damen CNC)",
   "title": "Table 3.79 block dimensions (MGN07 to MGN15) and Table 3.81 rail dimensions (MGNR05 to MGNR15, min / max end distance, assembly screw)",
   "url": "https://damencnc.com/userdata/file/3455-3_HIWIN_MGN_and_MGW_Product_Catalog_2023.pdf",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "HIWIN",
   "title": "MGN / MGW miniature guideway product page (HIWIN CAD data is offered from the maker's site; check HIWIN's terms)",
   "url": "https://www.hiwin.com/en/products/linear-guideways/mgn-mgw-series",
   "formats": [
    "STEP",
    "PDF"
   ],
   "license": "HIWIN site terms",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "not-scanned",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "mgn-rails",
  "hiwin-hg-linear-guideway-hgr-hgh-hgw-15-35",
  "hiwin-eg-linear-guideway-egr-egh-15-30",
  "t8-lead-screw",
  "linear-shafts-h6",
  "socket-head-cap-screws-metric",
  "ball-screw-end-supports-bk-bf-fk-ff"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "rail width x height",
   "exact": "MGNR5 5 x 3.6, MGNR7 7 x 4.8, MGNR9 9 x 6.5, MGNR12 12 x 8, MGNR15 15 x 10 mm",
   "mates": "MGN block of the same size runs on this rail",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "rail counterbore and hole",
   "exact": "D 3.6 / 4.2 / 6 / 6 / 6 x h 0.8 / 2.3 / 3.5 / 4.5 / 4.5, through Ø2.4 / 2.4 / 3.5 / 3.5 / 3.5 mm",
   "mates": "M2 (MGN5, 7) or M3 (MGN9, 12, 15) socket head cap screw; screws on socket-head-cap-screws-metric",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "block holes",
   "exact": "MGN7C B x C = 12 x 8 (M2 x 2.5); MGN9C 15 x 10 (M3 x 3); MGN12C 20 x 15 (M3 x 3.5); MGN15C 25 x 20 (M3 x 4)",
   "mates": "carriage plate drilled on the same B x C with clearance for M2 / M3 screws, seated on the block top",
   "fit": "designed",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What are the MGN7 rail dimensions?",
   "a": "7 mm wide, 4.8 mm high, holes every 15 mm with the first at 5 mm, counterbore 4.2 x 2.3 deep, through hole 2.4, for M2 screws (6 to 8 mm long by catalog edition)."
  },
  {
   "q": "What are the MGN7C block holes?",
   "a": "Four M2 x 2.5 holes, 12 mm across by 8 mm along; block 17 wide, 8 high, 22.5 long (the MGN7H is 30.8 long, holes 13 mm along)."
  },
  {
   "q": "Does the MGN5 have standard blocks?",
   "a": "Only the MGN5C-O / 5H-O (outer recirculation) block was in the text read, and its row is partly illegible, so it is not shown."
  }
 ],
 "files_license": null,
 "offers": [],
 "markdown": "https://xemstudio.com/objects/hiwin-mgn-miniature-guideway-mgn5-mgn15/index.md"
}