{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "l-rod-right-angle-drive",
 "name": "3D printable L-rod right-angle drive: gearless 90° elbow mechanism with sliding bent rods (STL, STEP)",
 "kind": "hardware",
 "category": "Mechanisms",
 "group": "Couplings & joints",
 "year": null,
 "question": "How can I turn a shaft 90 degrees without gears in a 3D printed design?",
 "tags": [
  "elbow mechanism",
  "gearless transmission",
  "right angle drive",
  "l rod",
  "bent rod",
  "90 degree",
  "print in place",
  "mechanism",
  "stl",
  "step"
 ],
 "aliases": [
  "gearless transmission 3d print",
  "elbow mechanism stl",
  "right angle drive without gears",
  "bent rod coupling",
  "l pin mechanism",
  "90 degree drive printable"
 ],
 "overall_mm": {
  "length": 87.1,
  "width": 87.1,
  "height": 42
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 5,
 "url": "https://xemstudio.com/objects/l-rod-right-angle-drive/",
 "sheet_txt": "https://xemstudio.com/objects/l-rod-right-angle-drive/sheet.txt",
 "sheet": {
  "basis": "Elbow mechanism (gearless transmission): three L-pins slide in hubs on two shafts at 90° and transmit rotation 1:1.",
  "overall_mm": {
   "length": 87.1,
   "width": 87.1,
   "height": 42
  },
  "notes": [
   "Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: elbow-hub, elbow-knob; stays the same: elbow-rod, elbow-frame.",
   "Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.",
   "Each rod slides in and out of its hub hole once per turn; both hubs turn at the same speed in opposite senses.",
   "Holes are 0.25 mm per side over the octagonal rods; rods print flat on a flat face.",
   "Knobs press onto the axles outside the frame; bore is nominal, add your press-fit allowance.",
   "Checked at 0, 30, 60 and 90°: no part collides."
  ],
  "table": {
   "columns": [
    "file",
    "what",
    "overall mm"
   ],
   "rows": [
    [
     "elbow-hub",
     "Hub: Ø30 × 14 with three Ø4.8 rod holes on R10 and a Ø6 axle",
     "30 × 30 × 49"
    ],
    [
     "elbow-rod",
     "L-rod (print 3): 4 mm octagonal legs, 39.5 mm each, 90° corner",
     "41.665 × 41.665 × 4.33"
    ],
    [
     "elbow-knob",
     "Octagonal knob, Ø6 bore for the axle",
     "19.753 × 19.753 × 8"
    ],
    [
     "elbow-frame",
     "L frame: two 4 mm walls at 90° with Ø6.4 axle holes",
     "78.5 × 78.5 × 42"
    ],
    [
     "elbow-assembled",
     "Every part in place (frame, 2 hubs, 3 rods, 2 knobs), each its own solid",
     "87.1 × 87.1 × 42"
    ]
   ]
  }
 },
 "sheet_text": "3D printable L-rod right-angle drive: gearless 90° elbow mechanism with sliding bent rods (STL, STEP) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/l-rod-right-angle-drive/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Elbow mechanism (gearless transmission): three L-pins slide in hubs on two shafts at 90° and transmit rotation 1:1.\nCatalog version: 2026-10-20\n\nOverall (mm): length 87.1, width 87.1, height 42\n- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: elbow-hub, elbow-knob; stays the same: elbow-rod, elbow-frame.\n- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.\n- Each rod slides in and out of its hub hole once per turn; both hubs turn at the same speed in opposite senses.\n- Holes are 0.25 mm per side over the octagonal rods; rods print flat on a flat face.\n- Knobs press onto the axles outside the frame; bore is nominal, add your press-fit allowance.\n- Checked at 0, 30, 60 and 90°: no part collides.\n\nfile  what  overall mm\nelbow-hub  Hub: Ø30 × 14 with three Ø4.8 rod holes on R10 and a Ø6 axle  30 × 30 × 49\nelbow-rod  L-rod (print 3): 4 mm octagonal legs, 39.5 mm each, 90° corner  41.665 × 41.665 × 4.33\nelbow-knob  Octagonal knob, Ø6 bore for the axle  19.753 × 19.753 × 8\nelbow-frame  L frame: two 4 mm walls at 90° with Ø6.4 axle holes  78.5 × 78.5 × 42\nelbow-assembled  Every part in place (frame, 2 hubs, 3 rods, 2 knobs), each its own solid  87.1 × 87.1 × 42\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- IJERT: Design, Analysis and Fabrication of Gearless Power Transmission by using Elbow Mechanism — web — Publisher's page; dimensions are facts — https://www.ijert.org/design-analysis-and-fabrication-of-gearless-power-transmission-by-using-elbow-mechanism\n- IRJET (issuu): Design and Fabrication of Gearless Transmission using Elbow Mechanism — web — Publisher's page; dimensions are facts — https://issuu.com/irjet/docs/irjet-v8i5504\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 5 parts): https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/index.json\nAPI: https://xemstudio.com/api/geometry?object=l-rod-right-angle-drive\n",
 "sources": [
  {
   "publisher": "IJERT",
   "title": "Design, Analysis and Fabrication of Gearless Power Transmission by using Elbow Mechanism",
   "url": "https://www.ijert.org/design-analysis-and-fabrication-of-gearless-power-transmission-by-using-elbow-mechanism",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "IRJET (issuu)",
   "title": "Design and Fabrication of Gearless Transmission using Elbow Mechanism",
   "url": "https://issuu.com/irjet/docs/irjet-v8i5504",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "printable-spur-gears-and-racks-module-2",
  "wedge-motion-converter",
  "print-in-place-crank-slider"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "rod holes",
   "exact": "Ø4.8 (rod 4 mm across flats + 0.25/side)",
   "mates": "L-rod",
   "fit": "run",
   "files": "hubs"
  },
  {
   "feature": "axle",
   "exact": "Ø6",
   "mates": "frame hole Ø6.4 / knob bore Ø6",
   "fit": "run",
   "files": "hubs"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "How does the elbow mechanism work?",
   "a": "Three L-shaped rods sit in holes in both hubs. As the input turns, each rod slides in and out and carries the output hub round with it."
  },
  {
   "q": "What ratio does it give?",
   "a": "1:1, at 90°."
  },
  {
   "q": "Why three rods?",
   "a": "At least three keep it turning smoothly; more rods are smoother still."
  },
  {
   "q": "Does it need lubrication?",
   "a": "A little dry PTFE or silicone on the rods makes it much smoother."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "elbow-hub",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/elbow-hub.step",
   "stl": "https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/elbow-hub.stl",
   "note": "Hub: Ø30 × 14 with three Ø4.8 rod holes on R10 and a Ø6 axle"
  },
  {
   "file": "elbow-rod",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/elbow-rod.step",
   "stl": "https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/elbow-rod.stl",
   "note": "L-rod (print 3): 4 mm octagonal legs, 39.5 mm each, 90° corner"
  },
  {
   "file": "elbow-knob",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/elbow-knob.step",
   "stl": "https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/elbow-knob.stl",
   "note": "Octagonal knob, Ø6 bore for the axle"
  },
  {
   "file": "elbow-frame",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/elbow-frame.step",
   "stl": "https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/elbow-frame.stl",
   "note": "L frame: two 4 mm walls at 90° with Ø6.4 axle holes"
  },
  {
   "file": "elbow-assembled",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/elbow-assembled.step",
   "stl": "https://xemstudio.com/files/mechanisms/l-rod-right-angle-drive/elbow-assembled.stl",
   "note": "Every part in place (frame, 2 hubs, 3 rods, 2 knobs), each its own solid"
  }
 ],
 "markdown": "https://xemstudio.com/objects/l-rod-right-angle-drive/index.md"
}