{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "mirka-hilti-fein-hose-sizes",
 "name": "Mirka, Hilti and Fein extractor hose sizes: Ø 27 / 32, 27 mm, 1-1/16 and 1-3/8 in",
 "kind": "standard",
 "category": "Tools & garage",
 "group": "Bench & craft machines",
 "year": null,
 "question": "What size are Mirka, Hilti and Fein vacuum hoses and connectors?",
 "tags": [
  "vacuum",
  "hose",
  "dust extractor",
  "mirka",
  "hilti",
  "fein",
  "sander",
  "dust collection"
 ],
 "aliases": [
  "mirka hose diameter",
  "mirka 27 mm hose",
  "mirka 32 mm connector",
  "hilti vacuum hose 27 mm",
  "fein turbo hose diameter",
  "fein vacuum hose size",
  "sander dust port adapter 27 mm"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "not-scanned",
 "les": false,
 "free_files": 0,
 "url": "https://xemstudio.com/objects/mirka-hilti-fein-hose-sizes/",
 "sheet_txt": "https://xemstudio.com/objects/mirka-hilti-fein-hose-sizes/sheet.txt",
 "sheet": {
  "basis": "Mirka and Hilti product pages; Fein hose listings from a retailer (secondary)",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Mirka prints a pair, 'Hose Ø 27 mm / 32 mm', for its hose-and-connector and sleeve-set products and does not say which number belongs to which part. Hilti's page prints 27 mm without inner or outer. Fein's hose listings are from a retailer and say 'inside diameter' (1-3/8 in and 1-1/16 in).",
   "Fein's 1-1/16 in is 26.99 mm, the same 27 mm class Hilti and Mirka name. This is a computed unit conversion, not a stated equivalence.",
   "None of the three prints cuff lengths, steps or taper, so no file.",
   "Only the numbers each source prints are listed, in the source's own words for what they measure. 'Nominal family' is the maker's own size label; it is not a measurement. Hose 'ID / OD' is the hose body, 'cuff / connection' is the end fitting, 'tool or accessory port' is the other side of an adapter. Inch figures are as printed; the mm in brackets are 25.4 mm per inch. A taper is listed only where a source prints it, and none does. Xem does not make these parts; measure your own hose before you size an adapter."
  ],
  "table": {
   "columns": [
    "item",
    "nominal family",
    "hose ID",
    "hose OD",
    "cuff / connection",
    "tool or accessory port",
    "taper",
    "source"
   ],
   "rows": [
    [
     "Mirka Hose and Connector",
     "Ø 27 / 32",
     "'Hose Ø 27 mm / 32 mm' (page does not say which is hose, which connector)",
     "not published",
     "see left",
     "not published",
     "not published",
     "maker page"
    ],
    [
     "Mirka Sleeve Set",
     "Ø 27 / 32",
     "not published",
     "not published",
     "'Hose Ø 27 mm / 32 mm'",
     "not published",
     "not published",
     "maker page"
    ],
    [
     "Hilti hose 27 mm x 3.5 m (203865), antistatic, for VC 125 / VC 150",
     "27 mm",
     "27 mm; inner or outer not stated",
     "not published",
     "not published",
     "not published",
     "not published",
     "maker page"
    ],
    [
     "Fein 31345066010 hose, 13 ft",
     "1-3/8 in",
     "1-3/8 in (34.9 mm), 'inside diameter'",
     "not published",
     "not published",
     "not published",
     "not published",
     "secondary"
    ],
    [
     "Fein 31345065010 hose, 13 ft",
     "1-1/16 in",
     "1-1/16 in (27.0 mm), 'inside diameter'",
     "not published",
     "not published",
     "not published",
     "not published",
     "secondary"
    ],
    [
     "Fein Turbo nozzle (blog)",
     "1-1/16 in (27 mm)",
     "not published",
     "not published",
     "not published",
     "nozzle 1-1/16 in (27 mm) and smaller",
     "not published",
     "secondary, blog"
    ]
   ]
  }
 },
 "sheet_text": "Mirka, Hilti and Fein extractor hose sizes: Ø 27 / 32, 27 mm, 1-1/16 and 1-3/8 in — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/mirka-hilti-fein-hose-sizes/  (sheet CC BY 4.0)\nBasis: Mirka and Hilti product pages; Fein hose listings from a retailer (secondary)\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Mirka prints a pair, 'Hose Ø 27 mm / 32 mm', for its hose-and-connector and sleeve-set products and does not say which number belongs to which part. Hilti's page prints 27 mm without inner or outer. Fein's hose listings are from a retailer and say 'inside diameter' (1-3/8 in and 1-1/16 in).\n- Fein's 1-1/16 in is 26.99 mm, the same 27 mm class Hilti and Mirka name. This is a computed unit conversion, not a stated equivalence.\n- None of the three prints cuff lengths, steps or taper, so no file.\n- Only the numbers each source prints are listed, in the source's own words for what they measure. 'Nominal family' is the maker's own size label; it is not a measurement. Hose 'ID / OD' is the hose body, 'cuff / connection' is the end fitting, 'tool or accessory port' is the other side of an adapter. Inch figures are as printed; the mm in brackets are 25.4 mm per inch. A taper is listed only where a source prints it, and none does. Xem does not make these parts; measure your own hose before you size an adapter.\n\nitem  nominal family  hose ID  hose OD  cuff / connection  tool or accessory port  taper  source\nMirka Hose and Connector  Ø 27 / 32  'Hose Ø 27 mm / 32 mm' (page does not say which is hose, which connector)  not published  see left  not published  not published  maker page\nMirka Sleeve Set  Ø 27 / 32  not published  not published  'Hose Ø 27 mm / 32 mm'  not published  not published  maker page\nHilti hose 27 mm x 3.5 m (203865), antistatic, for VC 125 / VC 150  27 mm  27 mm; inner or outer not stated  not published  not published  not published  not published  maker page\nFein 31345066010 hose, 13 ft  1-3/8 in  1-3/8 in (34.9 mm), 'inside diameter'  not published  not published  not published  not published  secondary\nFein 31345065010 hose, 13 ft  1-1/16 in  1-1/16 in (27.0 mm), 'inside diameter'  not published  not published  not published  not published  secondary\nFein Turbo nozzle (blog)  1-1/16 in (27 mm)  not published  not published  not published  nozzle 1-1/16 in (27 mm) and smaller  not published  secondary, blog\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Mirka: Hose and Connector 27 32 (Hose Ø 27 mm / 32 mm) — web — Publisher's page; dimensions are facts — https://www.mirka.com/en-gb/p/Hose-and-Connector-27-32\n- Mirka: Mirka Sleeve Set 27 32 (Hose Ø 27 mm / 32 mm) — web — Publisher's page; dimensions are facts — https://www.mirka.com/en-gb/p/Mirka-Sleeve-Set-27-32/\n- Hilti: Hose 27mm x 3.5m (11.5 ft) Tuck Pointing, 203865 (antistatic; VC 125, VC 150 extractors) — web — Publisher's page; dimensions are facts — https://www.hilti.com/c/CLS_DUST_WATER_MANAGEMENT/CLS_ACC_DUST_WATER_MANAGEMENT/CLS_NOZZELS_HOSES_ADAPTERS/203865\n- Toolnut (retailer, secondary): Fein 31345066010 vac hose: 1-3/8 in inside diameter, 13 ft, for Turbo I and II — web — Publisher's page; dimensions are facts — https://www.toolnut.com/products/fein-31345066010-vac-hose-1-3-8-in-dia-x-13-ft-length-for-turbo-i-ii-vacuums\n- Toolnut (retailer, secondary): Fein 31345065010 vac hose: 1-1/16 in inside diameter, 13 ft, for Turbo I and II — web — Publisher's page; dimensions are facts — https://www.toolnut.com/products/fein-31345065010-vac-hose-1-1-16-in-x-13-ft-for-turbo-i-ii-vacuums\n- ToolGuyd (blog, secondary): Vacuum hose size comparison: author measured a Shop Vac 2-1/2 in and a Festool 50 mm hose at about 2.4 in — web — Publisher's page; dimensions are facts — https://toolguyd.com/vacuum-hose-size-comparison/\n\nNo true-size file yet: the published figures do not fix the whole shape; a measured scan is planned.\nAPI: https://xemstudio.com/api/geometry?object=mirka-hilti-fein-hose-sizes\n",
 "sources": [
  {
   "publisher": "Mirka",
   "title": "Hose and Connector 27 32 (Hose Ø 27 mm / 32 mm)",
   "url": "https://www.mirka.com/en-gb/p/Hose-and-Connector-27-32",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Mirka",
   "title": "Mirka Sleeve Set 27 32 (Hose Ø 27 mm / 32 mm)",
   "url": "https://www.mirka.com/en-gb/p/Mirka-Sleeve-Set-27-32/",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Hilti",
   "title": "Hose 27mm x 3.5m (11.5 ft) Tuck Pointing, 203865 (antistatic; VC 125, VC 150 extractors)",
   "url": "https://www.hilti.com/c/CLS_DUST_WATER_MANAGEMENT/CLS_ACC_DUST_WATER_MANAGEMENT/CLS_NOZZELS_HOSES_ADAPTERS/203865",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Toolnut (retailer, secondary)",
   "title": "Fein 31345066010 vac hose: 1-3/8 in inside diameter, 13 ft, for Turbo I and II",
   "url": "https://www.toolnut.com/products/fein-31345066010-vac-hose-1-3-8-in-dia-x-13-ft-length-for-turbo-i-ii-vacuums",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Toolnut (retailer, secondary)",
   "title": "Fein 31345065010 vac hose: 1-1/16 in inside diameter, 13 ft, for Turbo I and II",
   "url": "https://www.toolnut.com/products/fein-31345065010-vac-hose-1-1-16-in-x-13-ft-for-turbo-i-ii-vacuums",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "ToolGuyd (blog, secondary)",
   "title": "Vacuum hose size comparison: author measured a Shop Vac 2-1/2 in and a Festool 50 mm hose at about 2.4 in",
   "url": "https://toolguyd.com/vacuum-hose-size-comparison/",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "not-scanned",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "cyclone-separator-proportions"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no printing tolerance)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no printing tolerance. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn.",
 "mating": [],
 "faq": [
  {
   "q": "What size is the Mirka sander hose?",
   "a": "Mirka prints 'Hose Ø 27 mm / 32 mm' for its Hose and Connector set; which number is the hose and which the connector is not stated."
  },
  {
   "q": "What size is a Fein Turbo hose?",
   "a": "A seller prints 1-3/8 in and 1-1/16 in inside diameter for the two Fein hoses."
  }
 ],
 "files_license": null,
 "offers": [],
 "markdown": "https://xemstudio.com/objects/mirka-hilti-fein-hose-sizes/index.md"
}