{ "version": "2026-10-20", "license": "Dimension sheets are written by Xem Studio from the cited sources and are free to use (CC BY 4.0, attribute 'Xem Studio'). Linked files belong to their publishers under the license shown; Xem Studio does not host them. 'license_verified: false' means the license shown is from memory or the publisher's page as last read and should be confirmed at the link before commercial use.", "slug": "printable-tri-clamp-adapters", "name": "Printable tri-clamp (45°): NPT male, NPT female and hose-barb adapters", "kind": "hardware", "category": "Hardware", "group": "Printable tri-clamp", "year": null, "question": "Can I 3D print a tri-clamp to hose barb or NPT adapter?", "tags": [ "adapter", "hose barb", "npt", "3d printable", "supportless", "print friendly", "45 degree", "sanitary", "tri-clamp", "clamp fitting", "brewing", "homebrew" ], "aliases": [ "printable tri clamp hose barb", "3d printed tri clamp npt adapter" ], "overall_mm": { "length": null, "width": null, "height": null }, "official_cad": false, "xem_status": "free-files", "les": false, "free_files": 28, "url": "https://xemstudio.com/objects/printable-tri-clamp-adapters/", "sheet_txt": "https://xemstudio.com/objects/printable-tri-clamp-adapters/sheet.txt", "sheet": { "basis": "Xem Studio design: lengths A per the standard 21MP / 22MP / 14MPHR tables used on the standard adapter pages, 45° rims; threads not modelled (male: major Ø over L2; female: tap-drill bore)", "overall_mm": { "length": null, "width": null, "height": null }, "notes": [ "Print face down; the thread or barb end prints up.", "Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6.", "Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside.", "Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40." ], "table": { "columns": [ "clamp", "end", "A_in" ], "rows": [ [ "½", "¼ MNPT", 2 ], [ "½", "½ MNPT", 1.63 ], [ "¾", "¾ MNPT", 1.79 ], [ "1", "½ MNPT", 2.19 ], [ "1", "1 MNPT", 2.25 ], [ "2", "2 MNPT", 2.64 ], [ "2½", "2½ MNPT", 2.88 ], [ "3", "3 MNPT", 3.07 ], [ "4", "4 MNPT", 3.16 ], [ "½", "⅛ FNPT", 1.25 ], [ "½", "¼ FNPT", 1.5 ], [ "¾", "¼ FNPT", 1.5 ], [ "1½", "1½ FNPT", 2.25 ], [ "2", "2 FNPT", 2.34 ], [ "3", "3 FNPT", 2.19 ], [ "4", "4 FNPT", 2.63 ], [ "½–¾", "0.25 in barb", 1.5 ], [ "½–¾", "0.375 in barb", 1.5 ], [ "½–¾", "0.5 in barb", 1.5 ], [ "1–1½", "0.25 in barb", 1.5 ], [ "1–1½", "0.375 in barb", 1.5 ], [ "1–1½", "0.5 in barb", 1.5 ], [ "1–1½", "0.75 in barb", 1.5 ], [ "1–1½", "1 in barb", 1.687 ], [ "2", "0.5 in barb", 1.812 ], [ "2", "1.5 in barb", 2.312 ], [ "3", "3 in barb", 3.094 ], [ "4", "4 in barb", 3.406 ] ] } }, "sheet_text": "Printable tri-clamp (45°): NPT male, NPT female and hose-barb adapters — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/printable-tri-clamp-adapters/ (CC BY 4.0)\nBasis: Xem Studio design: lengths A per the standard 21MP / 22MP / 14MPHR tables used on the standard adapter pages, 45° rims; threads not modelled (male: major Ø over L2; female: tap-drill bore)\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Print face down; the thread or barb end prints up.\n- Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6.\n- Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside.\n- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.\n\nclamp end A_in\n½ ¼ MNPT 2.0\n½ ½ MNPT 1.63\n¾ ¾ MNPT 1.79\n1 ½ MNPT 2.19\n1 1 MNPT 2.25\n2 2 MNPT 2.64\n2½ 2½ MNPT 2.88\n3 3 MNPT 3.07\n4 4 MNPT 3.16\n½ ⅛ FNPT 1.25\n½ ¼ FNPT 1.5\n¾ ¼ FNPT 1.5\n1½ 1½ FNPT 2.25\n2 2 FNPT 2.34\n3 3 FNPT 2.19\n4 4 FNPT 2.63\n½–¾ 0.25 in barb 1.5\n½–¾ 0.375 in barb 1.5\n½–¾ 0.5 in barb 1.5\n1–1½ 0.25 in barb 1.5\n1–1½ 0.375 in barb 1.5\n1–1½ 0.5 in barb 1.5\n1–1½ 0.75 in barb 1.5\n1–1½ 1 in barb 1.687\n2 0.5 in barb 1.812\n2 1.5 in barb 2.312\n3 3 in barb 3.094\n4 4 in barb 3.406\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Dixon: Clamp × male NPT (T21MP) and clamp × female NPT (T22MP) adapters: A per size — PDF — publisher's catalogue; dimensions cited — https://api.dixonvalve.com/en/media/1490003\n- Steel & O'Brien: 14MPHR rubber hose adapter: A per clamp × barb size — web — publisher's table; dimensions cited — https://www.steelobrien.com/products/sanitary-fittings/clamp-fittings/adapters/14mphr-rubber-hose-adapter/\n- Dixon: 14MPHR brewery hose barb: A and barb OD B (hose ID + 0.040 in) per size, ½ to 6 in — PDF — publisher's catalogue; dimensions cited — https://www.cooneybrothers.com/userfiles/ad/documents/Dixon_Sanitary_14MPHRG600_Catalog.pdf\n- ASME: B1.20.1 Pipe threads, general purpose (NPT): major diameter, L2, tap drill; B16.11 forged fittings (Class 3000 couplings); B36.10 Sch 40 bore — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/b1-20-1-pipe-threads-general-purpose-inch\n- Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 28 parts): https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/index.json\nAPI: https://xemstudio.com/api/geometry?object=printable-tri-clamp-adapters\n", "sources": [ { "publisher": "Dixon", "title": "Clamp × male NPT (T21MP) and clamp × female NPT (T22MP) adapters: A per size", "url": "https://api.dixonvalve.com/en/media/1490003", "formats": [ "PDF" ], "license": "publisher's catalogue; dimensions cited", "license_verified": true, "hosted": false }, { "publisher": "Steel & O'Brien", "title": "14MPHR rubber hose adapter: A per clamp × barb size", "url": "https://www.steelobrien.com/products/sanitary-fittings/clamp-fittings/adapters/14mphr-rubber-hose-adapter/", "formats": [ "web" ], "license": "publisher's table; dimensions cited", "license_verified": true, "hosted": false }, { "publisher": "Dixon", "title": "14MPHR brewery hose barb: A and barb OD B (hose ID + 0.040 in) per size, ½ to 6 in", "url": "https://www.cooneybrothers.com/userfiles/ad/documents/Dixon_Sanitary_14MPHRG600_Catalog.pdf", "formats": [ "PDF" ], "license": "publisher's catalogue; dimensions cited", "license_verified": true, "hosted": false }, { "publisher": "ASME", "title": "B1.20.1 Pipe threads, general purpose (NPT): major diameter, L2, tap drill; B16.11 forged fittings (Class 3000 couplings); B36.10 Sch 40 bore", "url": "https://www.asme.org/codes-standards/find-codes-standards/b1-20-1-pipe-threads-general-purpose-inch", "formats": [ "standard" ], "license": "ASME; dimensions are facts", "license_verified": false, "hosted": false }, { "publisher": "Rubber Fab", "title": "Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)", "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf", "formats": [ "PDF" ], "license": "maker chart; dimensions are facts", "license_verified": false, "hosted": false } ], "xem": { "status": "free-files", "sheet_free": true, "mesh_price_usd": null, "step_price_usd": null, "tolerance_mm": null }, "related": [ "tri-clamp-45-degree-printable", "printable-tri-clamp-clamps", "printable-tri-clamp-elbows", "printable-tri-clamp-tees-crosses", "printable-tri-clamp-reducers", "printable-tri-clamp-lids-caps" ], "fits": [], "dimensions": "exact (nominal, no printing tolerance)", "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no printing tolerance. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn.", "mating": [], "faq": [ { "q": "Threads?", "a": "Not modelled: chase or tap them after printing, or print with your slicer's thread modifier." } ], "files_license": null, "offers": [ { "file": "male-npt-45cone-0.5in-x-1-4", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-0.5in-x-1-4.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-0.5in-x-1-4.stl", "note": "½ in × ¼ MNPT" }, { "file": "male-npt-45cone-0.5in-x-1-2", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-0.5in-x-1-2.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-0.5in-x-1-2.stl", "note": "½ in × ½ MNPT" }, { "file": "male-npt-45cone-0.75in-x-3-4", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-0.75in-x-3-4.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-0.75in-x-3-4.stl", "note": "¾ in × ¾ MNPT" }, { "file": "male-npt-45cone-1in-x-1-2", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-1in-x-1-2.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-1in-x-1-2.stl", "note": "1 in × ½ MNPT" }, { "file": "male-npt-45cone-1in-x-1", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-1in-x-1.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-1in-x-1.stl", "note": "1 in × 1 MNPT" }, { "file": "male-npt-45cone-2in-x-2", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-2in-x-2.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-2in-x-2.stl", "note": "2 in × 2 MNPT" }, { "file": "male-npt-45cone-2.5in-x-2-1-2", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-2.5in-x-2-1-2.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-2.5in-x-2-1-2.stl", "note": "2½ in × 2½ MNPT" }, { "file": "male-npt-45cone-3in-x-3", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-3in-x-3.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-3in-x-3.stl", "note": "3 in × 3 MNPT" }, { "file": "male-npt-45cone-4in-x-4", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-4in-x-4.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/male-npt-45cone-4in-x-4.stl", "note": "4 in × 4 MNPT" }, { "file": "female-npt-45cone-0.5in-x-1-8", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-0.5in-x-1-8.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-0.5in-x-1-8.stl", "note": "½ in × ⅛ FNPT" }, { "file": "female-npt-45cone-0.5in-x-1-4", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-0.5in-x-1-4.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-0.5in-x-1-4.stl", "note": "½ in × ¼ FNPT" }, { "file": "female-npt-45cone-0.75in-x-1-4", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-0.75in-x-1-4.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-0.75in-x-1-4.stl", "note": "¾ in × ¼ FNPT" }, { "file": "female-npt-45cone-1.5in-x-1-1-2", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-1.5in-x-1-1-2.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-1.5in-x-1-1-2.stl", "note": "1½ in × 1½ FNPT" }, { "file": "female-npt-45cone-2in-x-2", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-2in-x-2.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-2in-x-2.stl", "note": "2 in × 2 FNPT" }, { "file": "female-npt-45cone-3in-x-3", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-3in-x-3.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-3in-x-3.stl", "note": "3 in × 3 FNPT" }, { "file": "female-npt-45cone-4in-x-4", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-4in-x-4.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/female-npt-45cone-4in-x-4.stl", "note": "4 in × 4 FNPT" }, { "file": "hose-barb-45cone-0.75in-x-0.25in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-0.75in-x-0.25in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-0.75in-x-0.25in.stl", "note": "½–¾ in × 0.25 in hose barb" }, { "file": "hose-barb-45cone-0.75in-x-0.375in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-0.75in-x-0.375in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-0.75in-x-0.375in.stl", "note": "½–¾ in × 0.375 in hose barb" }, { "file": "hose-barb-45cone-0.75in-x-0.5in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-0.75in-x-0.5in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-0.75in-x-0.5in.stl", "note": "½–¾ in × 0.5 in hose barb" }, { "file": "hose-barb-45cone-1.5in-x-0.25in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-1.5in-x-0.25in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-1.5in-x-0.25in.stl", "note": "1–1½ in × 0.25 in hose barb" }, { "file": "hose-barb-45cone-1.5in-x-0.375in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-1.5in-x-0.375in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-1.5in-x-0.375in.stl", "note": "1–1½ in × 0.375 in hose barb" }, { "file": "hose-barb-45cone-1.5in-x-0.5in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-1.5in-x-0.5in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-1.5in-x-0.5in.stl", "note": "1–1½ in × 0.5 in hose barb" }, { "file": "hose-barb-45cone-1.5in-x-0.75in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-1.5in-x-0.75in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-1.5in-x-0.75in.stl", "note": "1–1½ in × 0.75 in hose barb" }, { "file": "hose-barb-45cone-1.5in-x-1in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-1.5in-x-1in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-1.5in-x-1in.stl", "note": "1–1½ in × 1 in hose barb" }, { "file": "hose-barb-45cone-2in-x-0.5in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-2in-x-0.5in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-2in-x-0.5in.stl", "note": "2 in × 0.5 in hose barb" }, { "file": "hose-barb-45cone-2in-x-1.5in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-2in-x-1.5in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-2in-x-1.5in.stl", "note": "2 in × 1.5 in hose barb" }, { "file": "hose-barb-45cone-3in-x-3in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-3in-x-3in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-3in-x-3in.stl", "note": "3 in × 3 in hose barb" }, { "file": "hose-barb-45cone-4in-x-4in", "formats": [ "step", "stl" ], "price_usd": 0, "license": "CC BY 4.0 (Xem Studio)", "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-4in-x-4in.step", "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-adapters/hose-barb-45cone-4in-x-4in.stl", "note": "4 in × 4 in hose barb" } ], "markdown": "https://xemstudio.com/objects/printable-tri-clamp-adapters/index.md" }