{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "ratchet-wheel-and-pawl",
 "name": "3D printable ratchet wheel and pawl: one-way sawtooth wheel, plain and spring pawl (STL, STEP)",
 "kind": "hardware",
 "category": "Mechanisms",
 "group": "Intermittent motion",
 "year": null,
 "question": "How do I 3D print a ratchet and pawl so a wheel turns only one way?",
 "tags": [
  "ratchet",
  "pawl",
  "ratchet wheel",
  "one way",
  "sawtooth",
  "clicker",
  "3d printed ratchet",
  "stl",
  "step"
 ],
 "aliases": [
  "3d printable ratchet",
  "ratchet and pawl stl",
  "printable pawl",
  "one way wheel 3d print",
  "ratchet gear stl"
 ],
 "overall_mm": {
  "length": 60,
  "width": 60,
  "height": 5
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 4,
 "url": "https://xemstudio.com/objects/ratchet-wheel-and-pawl/",
 "sheet_txt": "https://xemstudio.com/objects/ratchet-wheel-and-pawl/sheet.txt",
 "sheet": {
  "basis": "Ratchet and pawl: the pawl rides over the sloped flanks one way and catches the steep face the other way; the contact normal must pass on the engagement side of the pawl pivot (FIRGELLI).",
  "overall_mm": {
   "length": 60,
   "width": 60,
   "height": 5
  },
  "notes": [
   "Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: ratchet-pawl-flex; stays the same: ratchet-wheel-od40-12t, ratchet-wheel-od60-24t, ratchet-pawl.",
   "Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.",
   "Wheel turns clockwise past the pawl, locks counter-clockwise.",
   "Place the pawl pivot so the pawl points along the tooth's steep face; then load pulls the pawl in.",
   "The flex pawl's leaf spring rests against a post or wall to keep the tip on the teeth.",
   "Print flat; PETG or nylon for the pawl."
  ],
  "table": {
   "columns": [
    "file",
    "what",
    "overall mm"
   ],
   "rows": [
    [
     "ratchet-wheel-od40-12t",
     "Ø40 ratchet wheel, 12 teeth 4 mm deep, Ø5 bore",
     "40 × 40 × 5"
    ],
    [
     "ratchet-wheel-od60-24t",
     "Ø60 ratchet wheel, 24 teeth, 4 spokes, 6 mm square key",
     "60 × 60 × 5"
    ],
    [
     "ratchet-pawl",
     "Pawl: 24.5 mm long, Ø3 pivot hole, pointed tip",
     "24.5 × 9 × 5"
    ],
    [
     "ratchet-pawl-flex",
     "Pawl with a printed leaf spring (1.2 mm): no separate spring needed",
     "32 × 16.5 × 5"
    ]
   ]
  }
 },
 "sheet_text": "3D printable ratchet wheel and pawl: one-way sawtooth wheel, plain and spring pawl (STL, STEP) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/ratchet-wheel-and-pawl/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Ratchet and pawl: the pawl rides over the sloped flanks one way and catches the steep face the other way; the contact normal must pass on the engagement side of the pawl pivot (FIRGELLI).\nCatalog version: 2026-10-20\n\nOverall (mm): length 60, width 60, height 5\n- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: ratchet-pawl-flex; stays the same: ratchet-wheel-od40-12t, ratchet-wheel-od60-24t, ratchet-pawl.\n- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.\n- Wheel turns clockwise past the pawl, locks counter-clockwise.\n- Place the pawl pivot so the pawl points along the tooth's steep face; then load pulls the pawl in.\n- The flex pawl's leaf spring rests against a post or wall to keep the tip on the teeth.\n- Print flat; PETG or nylon for the pawl.\n\nfile  what  overall mm\nratchet-wheel-od40-12t  Ø40 ratchet wheel, 12 teeth 4 mm deep, Ø5 bore  40 × 40 × 5\nratchet-wheel-od60-24t  Ø60 ratchet wheel, 24 teeth, 4 spokes, 6 mm square key  60 × 60 × 5\nratchet-pawl  Pawl: 24.5 mm long, Ø3 pivot hole, pointed tip  24.5 × 9 × 5\nratchet-pawl-flex  Pawl with a printed leaf spring (1.2 mm): no separate spring needed  32 × 16.5 × 5\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- FIRGELLI: Pawl Mechanism Explained: Self-Locking Geometry — web — Publisher's page; dimensions are facts — https://www.firgelliauto.com/en-fr/blogs/mechanisms/pawl\n- FIRGELLI: Ratchet-wheel Stops: Tooth Geometry and Holding Torque — web — Publisher's page; dimensions are facts — https://www.firgelliauto.com/blogs/mechanisms/ratchet-wheel-stops\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 4 parts): https://xemstudio.com/files/mechanisms/ratchet-wheel-and-pawl/index.json\nAPI: https://xemstudio.com/api/geometry?object=ratchet-wheel-and-pawl\n",
 "sources": [
  {
   "publisher": "FIRGELLI",
   "title": "Pawl Mechanism Explained: Self-Locking Geometry",
   "url": "https://www.firgelliauto.com/en-fr/blogs/mechanisms/pawl",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "FIRGELLI",
   "title": "Ratchet-wheel Stops: Tooth Geometry and Holding Torque",
   "url": "https://www.firgelliauto.com/blogs/mechanisms/ratchet-wheel-stops",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "printable-spur-gears-and-racks-module-2",
  "printable-spiral-torsion-springs",
  "print-in-place-ratchet-flexible-pawl",
  "bistable-snap-toggle"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "wheel bore",
   "exact": "Ø5 or 6 mm square",
   "mates": "shaft or post",
   "fit": "run",
   "files": "wheels"
  },
  {
   "feature": "pawl pivot",
   "exact": "Ø3",
   "mates": "M3 screw or 3 mm pin",
   "fit": "run",
   "files": "pawls"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Why does my pawl skip teeth?",
   "a": "The pivot is on the wrong side: the line from the tooth contact must pass the engagement side of the pivot so load pulls the pawl in."
  },
  {
   "q": "Do I need a spring for the pawl?",
   "a": "Use the flex pawl: its printed leaf spring presses the tip onto the teeth."
  },
  {
   "q": "How fine is the click?",
   "a": "12 teeth click every 30°, 24 teeth every 15°."
  },
  {
   "q": "What is it used for?",
   "a": "Winches, clickers, counters, one-way knobs and hold-open mechanisms."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "ratchet-wheel-od40-12t",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/ratchet-wheel-and-pawl/ratchet-wheel-od40-12t.step",
   "stl": "https://xemstudio.com/files/mechanisms/ratchet-wheel-and-pawl/ratchet-wheel-od40-12t.stl",
   "note": "Ø40 ratchet wheel, 12 teeth 4 mm deep, Ø5 bore"
  },
  {
   "file": "ratchet-wheel-od60-24t",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/ratchet-wheel-and-pawl/ratchet-wheel-od60-24t.step",
   "stl": "https://xemstudio.com/files/mechanisms/ratchet-wheel-and-pawl/ratchet-wheel-od60-24t.stl",
   "note": "Ø60 ratchet wheel, 24 teeth, 4 spokes, 6 mm square key"
  },
  {
   "file": "ratchet-pawl",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/ratchet-wheel-and-pawl/ratchet-pawl.step",
   "stl": "https://xemstudio.com/files/mechanisms/ratchet-wheel-and-pawl/ratchet-pawl.stl",
   "note": "Pawl: 24.5 mm long, Ø3 pivot hole, pointed tip"
  },
  {
   "file": "ratchet-pawl-flex",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/ratchet-wheel-and-pawl/ratchet-pawl-flex.step",
   "stl": "https://xemstudio.com/files/mechanisms/ratchet-wheel-and-pawl/ratchet-pawl-flex.stl",
   "note": "Pawl with a printed leaf spring (1.2 mm): no separate spring needed"
  }
 ],
 "markdown": "https://xemstudio.com/objects/ratchet-wheel-and-pawl/index.md"
}