{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "rubber-band-bowtie-detent-slider",
 "name": "3D printable rubber-band bowtie detent slider: three-position snap slider (STL, STEP)",
 "kind": "hardware",
 "category": "Mechanisms",
 "group": "Intermittent motion",
 "year": null,
 "question": "How do I make a 3D printed slider that clicks into fixed positions?",
 "tags": [
  "detent",
  "slider",
  "bowtie",
  "rubber band",
  "snap",
  "three position",
  "mechanism",
  "stl"
 ],
 "aliases": [
  "bowtie detent",
  "rubber band detent slider",
  "3 position slider detent",
  "printed detent mechanism",
  "slider with click stops"
 ],
 "overall_mm": {
  "length": 100,
  "width": 40,
  "height": 12.2
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 4,
 "url": "https://xemstudio.com/objects/rubber-band-bowtie-detent-slider/",
 "sheet_txt": "https://xemstudio.com/objects/rubber-band-bowtie-detent-slider/sheet.txt",
 "sheet": {
  "basis": "Rubber-band bowtie detent slider: designed for 3D printing, exact nominal mm.",
  "overall_mm": {
   "length": 100,
   "width": 40,
   "height": 12.2
  },
  "notes": [
   "Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: bowtie-slider-assembled.",
   "Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.",
   "Notches: 90 degree V, 2.5 deep, 20 mm apart; detent nose offset 0.4 mm.",
   "Slider 80 × 10 × 5 runs between rails with 0.4 mm gaps; the bowtie runs in a 12.8 mm guide.",
   "Any small rubber band works; loop it from post to post behind the bowtie's back.",
   "Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid."
  ],
  "table": {
   "columns": [
    "file",
    "what",
    "overall mm"
   ],
   "rows": [
    [
     "bowtie-slider-assembled",
     "assembled: 3 parts in place",
     "100 × 40 × 12.2"
    ],
    [
     "bowtie-slider-base",
     "bowtie slider base",
     "100 × 40 × 11.2"
    ],
    [
     "bowtie-slider-bar",
     "bowtie slider bar",
     "80 × 10 × 9"
    ],
    [
     "bowtie-detent",
     "bowtie slider detent",
     "12 × 13.934 × 5"
    ]
   ]
  }
 },
 "sheet_text": "3D printable rubber-band bowtie detent slider: three-position snap slider (STL, STEP) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/rubber-band-bowtie-detent-slider/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Rubber-band bowtie detent slider: designed for 3D printing, exact nominal mm.\nCatalog version: 2026-10-20\n\nOverall (mm): length 100.0, width 40.0, height 12.2\n- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: bowtie-slider-assembled.\n- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.\n- Notches: 90 degree V, 2.5 deep, 20 mm apart; detent nose offset 0.4 mm.\n- Slider 80 × 10 × 5 runs between rails with 0.4 mm gaps; the bowtie runs in a 12.8 mm guide.\n- Any small rubber band works; loop it from post to post behind the bowtie's back.\n- Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid.\n\nfile  what  overall mm\nbowtie-slider-assembled  assembled: 3 parts in place  100 × 40 × 12.2\nbowtie-slider-base  bowtie slider base  100 × 40 × 11.2\nbowtie-slider-bar  bowtie slider bar  80 × 10 × 9\nbowtie-detent  bowtie slider detent  12 × 13.934 × 5\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Wikipedia: Detent — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Detent\n- Wikipedia: Rubber band — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Rubber_band\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 4 parts): https://xemstudio.com/files/mechanisms/rubber-band-bowtie-detent-slider/index.json\nAPI: https://xemstudio.com/api/geometry?object=rubber-band-bowtie-detent-slider\n",
 "sources": [
  {
   "publisher": "Wikipedia",
   "title": "Detent",
   "url": "https://en.wikipedia.org/wiki/Detent",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Wikipedia",
   "title": "Rubber band",
   "url": "https://en.wikipedia.org/wiki/Rubber_band",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "bistable-snap-toggle",
  "star-wheel-ratchet-indexer",
  "flat-serpentine-springs"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "slider in rails",
   "exact": "10 wide, 0.4 gap each side",
   "mates": "base rails",
   "fit": "run",
   "files": "bar"
  },
  {
   "feature": "detent nose",
   "exact": "90 degree V, 0.4 offset",
   "mates": "slider notch",
   "fit": "designed",
   "files": "detent"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "How many stops?",
   "a": "Three, 20 mm apart."
  },
  {
   "q": "Can I add more?",
   "a": "Yes: add more V notches to the bar at any spacing over 6 mm."
  },
  {
   "q": "What sets the click force?",
   "a": "The rubber band tension."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "bowtie-slider-assembled",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/rubber-band-bowtie-detent-slider/bowtie-slider-assembled.step",
   "stl": "https://xemstudio.com/files/mechanisms/rubber-band-bowtie-detent-slider/bowtie-slider-assembled.stl",
   "note": "bowtie slider assembly"
  },
  {
   "file": "bowtie-slider-base",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/rubber-band-bowtie-detent-slider/bowtie-slider-base.step",
   "stl": "https://xemstudio.com/files/mechanisms/rubber-band-bowtie-detent-slider/bowtie-slider-base.stl",
   "note": "bowtie slider base"
  },
  {
   "file": "bowtie-slider-bar",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/rubber-band-bowtie-detent-slider/bowtie-slider-bar.step",
   "stl": "https://xemstudio.com/files/mechanisms/rubber-band-bowtie-detent-slider/bowtie-slider-bar.stl",
   "note": "bowtie slider bar"
  },
  {
   "file": "bowtie-detent",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/rubber-band-bowtie-detent-slider/bowtie-detent.step",
   "stl": "https://xemstudio.com/files/mechanisms/rubber-band-bowtie-detent-slider/bowtie-detent.stl",
   "note": "bowtie slider detent"
  }
 ],
 "markdown": "https://xemstudio.com/objects/rubber-band-bowtie-detent-slider/index.md"
}