{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "spiral-spring-clicker",
 "name": "3D printable spiral-spring clicker: push-button snap clicker with a printed clock spring (STL, STEP)",
 "kind": "hardware",
 "category": "Mechanisms",
 "group": "Intermittent motion",
 "year": null,
 "question": "How do I make a 3D printed clicker with a printed spring?",
 "tags": [
  "clicker",
  "spiral spring",
  "clock spring",
  "push button",
  "fidget",
  "snap",
  "mechanism",
  "stl"
 ],
 "aliases": [
  "spring clicker",
  "3d printed clicker",
  "spiral spring toy",
  "clock spring clicker",
  "fidget clicker mechanism"
 ],
 "overall_mm": {
  "length": 84,
  "width": 68,
  "height": 9.7
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 4,
 "url": "https://xemstudio.com/objects/spiral-spring-clicker/",
 "sheet_txt": "https://xemstudio.com/objects/spiral-spring-clicker/sheet.txt",
 "sheet": {
  "basis": "Spiral-spring clicker: designed for 3D printing, exact nominal mm.",
  "overall_mm": {
   "length": 84,
   "width": 68,
   "height": 9.7
  },
  "notes": [
   "Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, step to the nearest standard size (and redraw the hole or pocket it fits): spring-clicker-assembled, spring-clicker-base, spring-clicker-spring, spring-clicker-button.",
   "Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.",
   "Spring: spiral_spring OD 40, 1.0 mm arms, 1.5 turns, 30 mm lever; hub keys on a 4.6 mm square post.",
   "Button runs between rails and lifts the lever at 35 mm from the centre.",
   "Lever tip rests 0.3 mm off the 5 mm stop post.",
   "Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid."
  ],
  "table": {
   "columns": [
    "file",
    "what",
    "overall mm"
   ],
   "rows": [
    [
     "spring-clicker-assembled",
     "assembled: 3 parts in place",
     "84 × 68 × 9.7"
    ],
    [
     "spring-clicker-base",
     "spring clicker base",
     "84 × 68 × 9.7"
    ],
    [
     "spring-clicker-spring",
     "spring clicker spring",
     "72.5 × 40 × 5"
    ],
    [
     "spring-clicker-button",
     "spring clicker button",
     "12 × 37 × 5"
    ]
   ]
  }
 },
 "sheet_text": "3D printable spiral-spring clicker: push-button snap clicker with a printed clock spring (STL, STEP) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/spiral-spring-clicker/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Spiral-spring clicker: designed for 3D printing, exact nominal mm.\nCatalog version: 2026-10-20\n\nOverall (mm): length 84.0, width 68.0, height 9.7\n- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, step to the nearest standard size (and redraw the hole or pocket it fits): spring-clicker-assembled, spring-clicker-base, spring-clicker-spring, spring-clicker-button.\n- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.\n- Spring: spiral_spring OD 40, 1.0 mm arms, 1.5 turns, 30 mm lever; hub keys on a 4.6 mm square post.\n- Button runs between rails and lifts the lever at 35 mm from the centre.\n- Lever tip rests 0.3 mm off the 5 mm stop post.\n- Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid.\n\nfile  what  overall mm\nspring-clicker-assembled  assembled: 3 parts in place  84 × 68 × 9.7\nspring-clicker-base  spring clicker base  84 × 68 × 9.7\nspring-clicker-spring  spring clicker spring  72.5 × 40 × 5\nspring-clicker-button  spring clicker button  12 × 37 × 5\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Wikipedia: Spring (device) — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Spring_(device)\n- Wikipedia: Clicker — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Clicker\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 4 parts): https://xemstudio.com/files/mechanisms/spiral-spring-clicker/index.json\nAPI: https://xemstudio.com/api/geometry?object=spiral-spring-clicker\n",
 "sources": [
  {
   "publisher": "Wikipedia",
   "title": "Spring (device)",
   "url": "https://en.wikipedia.org/wiki/Spring_(device)",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Wikipedia",
   "title": "Clicker",
   "url": "https://en.wikipedia.org/wiki/Clicker",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "printable-spiral-torsion-springs",
  "bistable-snap-toggle",
  "rubber-band-bowtie-detent-slider"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "spring hub",
   "exact": "5.0 square hole",
   "mates": "4.6 square post",
   "fit": "slide",
   "files": "spring"
  },
  {
   "feature": "button in rails",
   "exact": "8 wide, 0.4 gap each side",
   "mates": "base rails",
   "fit": "run",
   "files": "button"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What makes the click?",
   "a": "The spring lever snapping back onto the stop post."
  },
  {
   "q": "Can I make it louder?",
   "a": "Use thicker spring arms (1.2–1.4 mm) or a thinner stop post that rings."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "spring-clicker-assembled",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/spiral-spring-clicker/spring-clicker-assembled.step",
   "stl": "https://xemstudio.com/files/mechanisms/spiral-spring-clicker/spring-clicker-assembled.stl",
   "note": "spring clicker assembly"
  },
  {
   "file": "spring-clicker-base",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/spiral-spring-clicker/spring-clicker-base.step",
   "stl": "https://xemstudio.com/files/mechanisms/spiral-spring-clicker/spring-clicker-base.stl",
   "note": "spring clicker base"
  },
  {
   "file": "spring-clicker-spring",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/spiral-spring-clicker/spring-clicker-spring.step",
   "stl": "https://xemstudio.com/files/mechanisms/spiral-spring-clicker/spring-clicker-spring.stl",
   "note": "spring clicker spring"
  },
  {
   "file": "spring-clicker-button",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/spiral-spring-clicker/spring-clicker-button.step",
   "stl": "https://xemstudio.com/files/mechanisms/spiral-spring-clicker/spring-clicker-button.stl",
   "note": "spring clicker button"
  }
 ],
 "markdown": "https://xemstudio.com/objects/spiral-spring-clicker/index.md"
}