{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "star-wheel-ratchet-indexer",
 "name": "3D printable spring-lever star-wheel ratchet indexer: 8-step index wheel with printed leaf-spring lever (STL, STEP)",
 "kind": "hardware",
 "category": "Mechanisms",
 "group": "Intermittent motion",
 "year": null,
 "question": "How do I make a 3D printed indexing wheel that clicks in fixed steps?",
 "tags": [
  "indexer",
  "index wheel",
  "star wheel",
  "ratchet",
  "detent",
  "pawl",
  "leaf spring",
  "mechanism",
  "print in place",
  "stl"
 ],
 "aliases": [
  "star wheel indexer",
  "ratchet indexer 3d print",
  "index wheel detent",
  "spring lever ratchet",
  "indexing mechanism stl",
  "star wheel detent"
 ],
 "overall_mm": {
  "length": 72,
  "width": 90,
  "height": 9.7
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 4,
 "url": "https://xemstudio.com/objects/star-wheel-ratchet-indexer/",
 "sheet_txt": "https://xemstudio.com/objects/star-wheel-ratchet-indexer/sheet.txt",
 "sheet": {
  "basis": "Spring-lever star-wheel ratchet indexer: designed for 3D printing, exact nominal mm.",
  "overall_mm": {
   "length": 72,
   "width": 90,
   "height": 9.7
  },
  "notes": [
   "Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: star-indexer-assembled; step to the nearest standard size (and redraw the hole or pocket it fits): star-indexer-spring-lever.",
   "Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.",
   "8 teeth = 45 degree steps; the lever tip sits in a valley against the radial tooth face.",
   "The leaf spring is printed on the lever; preload it against the 6 mm post (bend it slightly when assembling).",
   "Wheel: OD 44, 7 mm tooth depth, bore 5.4 for the 5 mm pin.",
   "Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid."
  ],
  "table": {
   "columns": [
    "file",
    "what",
    "overall mm"
   ],
   "rows": [
    [
     "star-indexer-assembled",
     "assembled: 3 parts in place",
     "72 × 90 × 9.7"
    ],
    [
     "star-indexer-base",
     "star indexer base",
     "72 × 90 × 9.7"
    ],
    [
     "star-indexer-wheel",
     "star indexer wheel",
     "44 × 44 × 5"
    ],
    [
     "star-indexer-spring-lever",
     "star indexer lever",
     "44.8 × 21.3 × 5"
    ]
   ]
  }
 },
 "sheet_text": "3D printable spring-lever star-wheel ratchet indexer: 8-step index wheel with printed leaf-spring lever (STL, STEP) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/star-wheel-ratchet-indexer/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Spring-lever star-wheel ratchet indexer: designed for 3D printing, exact nominal mm.\nCatalog version: 2026-10-20\n\nOverall (mm): length 72.0, width 90.0, height 9.7\n- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: star-indexer-assembled; step to the nearest standard size (and redraw the hole or pocket it fits): star-indexer-spring-lever.\n- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.\n- 8 teeth = 45 degree steps; the lever tip sits in a valley against the radial tooth face.\n- The leaf spring is printed on the lever; preload it against the 6 mm post (bend it slightly when assembling).\n- Wheel: OD 44, 7 mm tooth depth, bore 5.4 for the 5 mm pin.\n- Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid.\n\nfile  what  overall mm\nstar-indexer-assembled  assembled: 3 parts in place  72 × 90 × 9.7\nstar-indexer-base  star indexer base  72 × 90 × 9.7\nstar-indexer-wheel  star indexer wheel  44 × 44 × 5\nstar-indexer-spring-lever  star indexer lever  44.8 × 21.3 × 5\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Wikipedia: Ratchet (device) — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Ratchet_(device)\n- Wikipedia: Detent — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Detent\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 4 parts): https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/index.json\nAPI: https://xemstudio.com/api/geometry?object=star-wheel-ratchet-indexer\n",
 "sources": [
  {
   "publisher": "Wikipedia",
   "title": "Ratchet (device)",
   "url": "https://en.wikipedia.org/wiki/Ratchet_(device)",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Wikipedia",
   "title": "Detent",
   "url": "https://en.wikipedia.org/wiki/Detent",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "ratchet-wheel-and-pawl",
  "bistable-snap-toggle",
  "printable-spiral-torsion-springs"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "wheel and lever bores",
   "exact": "Ø5.4 on Ø5 pin",
   "mates": "base pins",
   "fit": "run",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "How many steps per turn?",
   "a": "8 (45 degrees each)."
  },
  {
   "q": "Why does it lock one way?",
   "a": "The teeth have a radial face on one side: the lever tip catches it counter-clockwise and rides up the slope clockwise."
  },
  {
   "q": "Do I need a metal spring?",
   "a": "No, the leaf spring is printed on the lever."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "star-indexer-assembled",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-assembled.step",
   "stl": "https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-assembled.stl",
   "note": "star indexer assembly"
  },
  {
   "file": "star-indexer-base",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-base.step",
   "stl": "https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-base.stl",
   "note": "star indexer base"
  },
  {
   "file": "star-indexer-wheel",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-wheel.step",
   "stl": "https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-wheel.stl",
   "note": "star indexer wheel"
  },
  {
   "file": "star-indexer-spring-lever",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-spring-lever.step",
   "stl": "https://xemstudio.com/files/mechanisms/star-wheel-ratchet-indexer/star-indexer-spring-lever.stl",
   "note": "star indexer lever"
  }
 ],
 "markdown": "https://xemstudio.com/objects/star-wheel-ratchet-indexer/index.md"
}