{
 "version": "2026-10-20",
 "license": "Dimension sheets are written by Xem Studio from the cited sources and are free to use (CC BY 4.0, attribute 'Xem Studio'). Linked files belong to their publishers under the license shown; Xem Studio does not host them. 'license_verified: false' means the license shown is from memory or the publisher's page as last read and should be confirmed at the link before commercial use.",
 "slug": "tri-clamp-45-degree-printable",
 "name": "Printable tri-clamp (45°): ferrules, spools and caps, ½ to 4 in",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Printable tri-clamp",
 "year": null,
 "question": "Is there a tri-clamp ferrule that 3D prints without supports?",
 "tags": [
  "ferrule",
  "spool",
  "cap",
  "3d printable",
  "supportless",
  "print friendly",
  "45 degree",
  "sanitary",
  "tri-clamp",
  "clamp fitting",
  "brewing",
  "homebrew"
 ],
 "aliases": [
  "3d printable tri clamp",
  "tri clamp no supports",
  "printable sanitary ferrule",
  "45 degree tri clamp",
  "print friendly tri clamp pipe"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 46,
 "url": "https://xemstudio.com/objects/tri-clamp-45-degree-printable/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-45-degree-printable/sheet.txt",
 "sheet": {
  "basis": "Xem Studio design: ISO 2852 face unchanged, back cone 45°; tube and flange per size as the standard ferrules on this site",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Ferrules ½ and 1⅛ in long, spools 3, 6 and 12 in, solid caps per flange size. hub_mm is the rim plus the 45° cone, measured from the face along the tube.",
   "Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6.",
   "Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside.",
   "Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40."
  ],
  "table": {
   "columns": [
    "size_in",
    "tube_od_mm",
    "flange_mm",
    "groove_mm",
    "hub_mm"
   ],
   "rows": [
    [
     "½",
     12.7,
     25,
     20.4,
     9
    ],
    [
     "¾",
     19.05,
     25,
     20.4,
     5.82
    ],
    [
     "1",
     25.4,
     50.5,
     43.5,
     15.4
    ],
    [
     "1½",
     38.1,
     50.5,
     43.5,
     9.05
    ],
    [
     "2",
     50.8,
     64,
     56.5,
     9.45
    ],
    [
     "2½",
     63.5,
     77.5,
     70.5,
     9.85
    ],
    [
     "3",
     76.2,
     91,
     83.5,
     10.25
    ],
    [
     "4",
     101.6,
     119,
     110,
     11.55
    ]
   ]
  }
 },
 "sheet_text": "Printable tri-clamp (45°): ferrules, spools and caps, ½ to 4 in — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-45-degree-printable/  (CC BY 4.0)\nBasis: Xem Studio design: ISO 2852 face unchanged, back cone 45°; tube and flange per size as the standard ferrules on this site\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Ferrules ½ and 1⅛ in long, spools 3, 6 and 12 in, solid caps per flange size. hub_mm is the rim plus the 45° cone, measured from the face along the tube.\n- Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6.\n- Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside.\n- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.\n\nsize_in  tube_od_mm  flange_mm  groove_mm  hub_mm\n½  12.7  25.0  20.4  9.0\n¾  19.05  25.0  20.4  5.82\n1  25.4  50.5  43.5  15.4\n1½  38.1  50.5  43.5  9.05\n2  50.8  64.0  56.5  9.45\n2½  63.5  77.5  70.5  9.85\n3  76.2  91.0  83.5  10.25\n4  101.6  119.0  110.0  11.55\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- GW Kent: Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness — web — publisher's guide; dimensions cited — https://www.gwkent.com/triclamp-guide\n- Rubber Fab: Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676) — PDF — publisher's chart; dimensions cited, nothing copied — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n- Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 46 parts): https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-45-degree-printable\n",
 "sources": [
  {
   "publisher": "GW Kent",
   "title": "Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness",
   "url": "https://www.gwkent.com/triclamp-guide",
   "formats": [
    "web"
   ],
   "license": "publisher's guide; dimensions cited",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Rubber Fab",
   "title": "Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676)",
   "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf",
   "formats": [
    "PDF"
   ],
   "license": "publisher's chart; dimensions cited, nothing copied",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Rubber Fab",
   "title": "Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)",
   "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf",
   "formats": [
    "PDF"
   ],
   "license": "maker chart; dimensions are facts",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "printable-tri-clamp-clamps",
  "printable-tri-clamp-elbows",
  "printable-tri-clamp-tees-crosses",
  "printable-tri-clamp-reducers",
  "printable-tri-clamp-adapters",
  "printable-tri-clamp-lids-caps"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no printing tolerance)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no printing tolerance. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn.",
 "mating": [],
 "faq": [
  {
   "q": "Does a standard gasket seal?",
   "a": "Yes: face, groove and rim are exactly ISO 2852."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "ferrule-45-0.5in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-0.5in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-0.5in-12.7mm.stl",
   "note": "½ in ferrule, 45° back cone, 0.5 in long"
  },
  {
   "file": "ferrule-45-0.5in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-0.5in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-0.5in-28.6mm.stl",
   "note": "½ in ferrule, 45° back cone, 1.125 in long"
  },
  {
   "file": "spool-45-0.5in-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.5in-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.5in-3in.stl",
   "note": "½ in spool, 45° both ends, 3 in face to face"
  },
  {
   "file": "spool-45-0.5in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.5in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.5in-6in.stl",
   "note": "½ in spool, 45° both ends, 6 in face to face"
  },
  {
   "file": "spool-45-0.5in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.5in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.5in-12in.stl",
   "note": "½ in spool, 45° both ends, 12 in face to face"
  },
  {
   "file": "ferrule-45-0.75in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-0.75in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-0.75in-12.7mm.stl",
   "note": "¾ in ferrule, 45° back cone, 0.5 in long"
  },
  {
   "file": "ferrule-45-0.75in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-0.75in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-0.75in-28.6mm.stl",
   "note": "¾ in ferrule, 45° back cone, 1.125 in long"
  },
  {
   "file": "spool-45-0.75in-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.75in-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.75in-3in.stl",
   "note": "¾ in spool, 45° both ends, 3 in face to face"
  },
  {
   "file": "spool-45-0.75in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.75in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.75in-6in.stl",
   "note": "¾ in spool, 45° both ends, 6 in face to face"
  },
  {
   "file": "spool-45-0.75in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.75in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-0.75in-12in.stl",
   "note": "¾ in spool, 45° both ends, 12 in face to face"
  },
  {
   "file": "ferrule-45-1in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-1in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-1in-12.7mm.stl",
   "note": "1 in ferrule, 45° back cone, 0.5 in long"
  },
  {
   "file": "ferrule-45-1in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-1in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-1in-28.6mm.stl",
   "note": "1 in ferrule, 45° back cone, 1.125 in long"
  },
  {
   "file": "spool-45-1in-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1in-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1in-3in.stl",
   "note": "1 in spool, 45° both ends, 3 in face to face"
  },
  {
   "file": "spool-45-1in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1in-6in.stl",
   "note": "1 in spool, 45° both ends, 6 in face to face"
  },
  {
   "file": "spool-45-1in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1in-12in.stl",
   "note": "1 in spool, 45° both ends, 12 in face to face"
  },
  {
   "file": "ferrule-45-1.5in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-1.5in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-1.5in-12.7mm.stl",
   "note": "1½ in ferrule, 45° back cone, 0.5 in long"
  },
  {
   "file": "ferrule-45-1.5in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-1.5in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-1.5in-28.6mm.stl",
   "note": "1½ in ferrule, 45° back cone, 1.125 in long"
  },
  {
   "file": "spool-45-1.5in-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1.5in-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1.5in-3in.stl",
   "note": "1½ in spool, 45° both ends, 3 in face to face"
  },
  {
   "file": "spool-45-1.5in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1.5in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1.5in-6in.stl",
   "note": "1½ in spool, 45° both ends, 6 in face to face"
  },
  {
   "file": "spool-45-1.5in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1.5in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-1.5in-12in.stl",
   "note": "1½ in spool, 45° both ends, 12 in face to face"
  },
  {
   "file": "ferrule-45-2in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-2in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-2in-12.7mm.stl",
   "note": "2 in ferrule, 45° back cone, 0.5 in long"
  },
  {
   "file": "ferrule-45-2in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-2in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-2in-28.6mm.stl",
   "note": "2 in ferrule, 45° back cone, 1.125 in long"
  },
  {
   "file": "spool-45-2in-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2in-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2in-3in.stl",
   "note": "2 in spool, 45° both ends, 3 in face to face"
  },
  {
   "file": "spool-45-2in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2in-6in.stl",
   "note": "2 in spool, 45° both ends, 6 in face to face"
  },
  {
   "file": "spool-45-2in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2in-12in.stl",
   "note": "2 in spool, 45° both ends, 12 in face to face"
  },
  {
   "file": "ferrule-45-2.5in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-2.5in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-2.5in-12.7mm.stl",
   "note": "2½ in ferrule, 45° back cone, 0.5 in long"
  },
  {
   "file": "ferrule-45-2.5in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-2.5in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-2.5in-28.6mm.stl",
   "note": "2½ in ferrule, 45° back cone, 1.125 in long"
  },
  {
   "file": "spool-45-2.5in-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2.5in-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2.5in-3in.stl",
   "note": "2½ in spool, 45° both ends, 3 in face to face"
  },
  {
   "file": "spool-45-2.5in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2.5in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2.5in-6in.stl",
   "note": "2½ in spool, 45° both ends, 6 in face to face"
  },
  {
   "file": "spool-45-2.5in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2.5in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-2.5in-12in.stl",
   "note": "2½ in spool, 45° both ends, 12 in face to face"
  },
  {
   "file": "ferrule-45-3in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-3in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-3in-12.7mm.stl",
   "note": "3 in ferrule, 45° back cone, 0.5 in long"
  },
  {
   "file": "ferrule-45-3in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-3in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-3in-28.6mm.stl",
   "note": "3 in ferrule, 45° back cone, 1.125 in long"
  },
  {
   "file": "spool-45-3in-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-3in-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-3in-3in.stl",
   "note": "3 in spool, 45° both ends, 3 in face to face"
  },
  {
   "file": "spool-45-3in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-3in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-3in-6in.stl",
   "note": "3 in spool, 45° both ends, 6 in face to face"
  },
  {
   "file": "spool-45-3in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-3in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-3in-12in.stl",
   "note": "3 in spool, 45° both ends, 12 in face to face"
  },
  {
   "file": "ferrule-45-4in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-4in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-4in-12.7mm.stl",
   "note": "4 in ferrule, 45° back cone, 0.5 in long"
  },
  {
   "file": "ferrule-45-4in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-4in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/ferrule-45-4in-28.6mm.stl",
   "note": "4 in ferrule, 45° back cone, 1.125 in long"
  },
  {
   "file": "spool-45-4in-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-4in-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-4in-3in.stl",
   "note": "4 in spool, 45° both ends, 3 in face to face"
  },
  {
   "file": "spool-45-4in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-4in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-4in-6in.stl",
   "note": "4 in spool, 45° both ends, 6 in face to face"
  },
  {
   "file": "spool-45-4in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-4in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/spool-45-4in-12in.stl",
   "note": "4 in spool, 45° both ends, 12 in face to face"
  },
  {
   "file": "cap-45-0.75in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-0.75in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-0.75in.stl",
   "note": "½–¾ in solid cap, 45° back cone"
  },
  {
   "file": "cap-45-1.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-1.5in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-1.5in.stl",
   "note": "1–1½ in solid cap, 45° back cone"
  },
  {
   "file": "cap-45-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-2in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-2in.stl",
   "note": "2 in solid cap, 45° back cone"
  },
  {
   "file": "cap-45-2.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-2.5in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-2.5in.stl",
   "note": "2½ in solid cap, 45° back cone"
  },
  {
   "file": "cap-45-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-3in.stl",
   "note": "3 in solid cap, 45° back cone"
  },
  {
   "file": "cap-45-4in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-4in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-45-degree-printable/cap-45-4in.stl",
   "note": "4 in solid cap, 45° back cone"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-45-degree-printable/index.md"
}