{
 "object": "can-engine-printed-kit",
 "license": "CC BY 4.0, Xem Studio",
 "les": "https://longearthsociety.com/engineering/",
 "files": [
  {
   "name": "can-cap-66",
   "step": "/files/hardware/can-engine-printed-kit/can-cap-66.step",
   "stl": "/files/hardware/can-engine-printed-kit/can-cap-66.stl",
   "note": "cap for a \u00d866.0 can: 0.6 mm clearance, \u00d82.5 displacer-rod guide (3/32 in brass tube), transfer port, 3 \u00d7 M3 grub screws"
  },
  {
   "name": "can-cap-58",
   "step": "/files/hardware/can-engine-printed-kit/can-cap-58.step",
   "stl": "/files/hardware/can-engine-printed-kit/can-cap-58.stl",
   "note": "cap for a \u00d858.0 can: 0.6 mm clearance, \u00d82.5 displacer-rod guide (3/32 in brass tube), transfer port, 3 \u00d7 M3 grub screws"
  },
  {
   "name": "can-cap-53.3",
   "step": "/files/hardware/can-engine-printed-kit/can-cap-53.3.step",
   "stl": "/files/hardware/can-engine-printed-kit/can-cap-53.3.stl",
   "note": "cap for a \u00d853.3 can: 0.6 mm clearance, \u00d82.5 displacer-rod guide (3/32 in brass tube), transfer port, 3 \u00d7 M3 grub screws"
  },
  {
   "name": "can-cap-76.2",
   "step": "/files/hardware/can-engine-printed-kit/can-cap-76.2.step",
   "stl": "/files/hardware/can-engine-printed-kit/can-cap-76.2.stl",
   "note": "cap for a \u00d876.2 can: 0.6 mm clearance, \u00d82.5 displacer-rod guide (3/32 in brass tube), transfer port, 3 \u00d7 M3 grub screws"
  },
  {
   "name": "diaphragm-ring-40",
   "step": "/files/hardware/can-engine-printed-kit/diaphragm-ring-40.step",
   "stl": "/files/hardware/can-engine-printed-kit/diaphragm-ring-40.stl",
   "note": "diaphragm clamp ring \u00d840 bore, 6 \u00d7 M3, 3 thick (print two)"
  },
  {
   "name": "diaphragm-disc-20",
   "step": "/files/hardware/can-engine-printed-kit/diaphragm-disc-20.step",
   "stl": "/files/hardware/can-engine-printed-kit/diaphragm-disc-20.stl",
   "note": "diaphragm centre disc \u00d820 \u00d7 2, \u00d83.2 hole for the con-rod screw"
  },
  {
   "name": "diaphragm-ring-50",
   "step": "/files/hardware/can-engine-printed-kit/diaphragm-ring-50.step",
   "stl": "/files/hardware/can-engine-printed-kit/diaphragm-ring-50.stl",
   "note": "diaphragm clamp ring \u00d850 bore, 6 \u00d7 M3, 3 thick (print two)"
  },
  {
   "name": "diaphragm-disc-25",
   "step": "/files/hardware/can-engine-printed-kit/diaphragm-disc-25.step",
   "stl": "/files/hardware/can-engine-printed-kit/diaphragm-disc-25.stl",
   "note": "diaphragm centre disc \u00d825 \u00d7 2, \u00d83.2 hole for the con-rod screw"
  },
  {
   "name": "diaphragm-ring-60",
   "step": "/files/hardware/can-engine-printed-kit/diaphragm-ring-60.step",
   "stl": "/files/hardware/can-engine-printed-kit/diaphragm-ring-60.stl",
   "note": "diaphragm clamp ring \u00d860 bore, 6 \u00d7 M3, 3 thick (print two)"
  },
  {
   "name": "diaphragm-disc-30",
   "step": "/files/hardware/can-engine-printed-kit/diaphragm-disc-30.step",
   "stl": "/files/hardware/can-engine-printed-kit/diaphragm-disc-30.stl",
   "note": "diaphragm centre disc \u00d830 \u00d7 2, \u00d83.2 hole for the con-rod screw"
  },
  {
   "name": "crank-stand-40",
   "step": "/files/hardware/can-engine-printed-kit/crank-stand-40.step",
   "stl": "/files/hardware/can-engine-printed-kit/crank-stand-40.stl",
   "note": "crank stand 40 mm, 623 bearing pocket (\u00d810.2), 2 \u00d7 M3 base holes (print two)"
  },
  {
   "name": "crank-stand-60",
   "step": "/files/hardware/can-engine-printed-kit/crank-stand-60.step",
   "stl": "/files/hardware/can-engine-printed-kit/crank-stand-60.stl",
   "note": "crank stand 60 mm, 623 bearing pocket (\u00d810.2), 2 \u00d7 M3 base holes (print two)"
  },
  {
   "name": "crank-stand-80",
   "step": "/files/hardware/can-engine-printed-kit/crank-stand-80.step",
   "stl": "/files/hardware/can-engine-printed-kit/crank-stand-80.stl",
   "note": "crank stand 80 mm, 623 bearing pocket (\u00d810.2), 2 \u00d7 M3 base holes (print two)"
  },
  {
   "name": "hub-cd-15-to-5",
   "step": "/files/hardware/can-engine-printed-kit/hub-cd-15-to-5.step",
   "stl": "/files/hardware/can-engine-printed-kit/hub-cd-15-to-5.stl",
   "note": "CD / DVD hub: \u00d815 spigot \u2192 \u00d85 shaft, M3 set screw"
  },
  {
   "name": "hub-cd-15-to-8",
   "step": "/files/hardware/can-engine-printed-kit/hub-cd-15-to-8.step",
   "stl": "/files/hardware/can-engine-printed-kit/hub-cd-15-to-8.stl",
   "note": "CD / DVD hub: \u00d815 spigot \u2192 \u00d88 shaft"
  },
  {
   "name": "hub-platter-25-to-8",
   "step": "/files/hardware/can-engine-printed-kit/hub-platter-25-to-8.step",
   "stl": "/files/hardware/can-engine-printed-kit/hub-platter-25-to-8.stl",
   "note": "3.5 in HDD platter hub: \u00d825 spigot \u2192 \u00d88 shaft"
  },
  {
   "name": "hub-platter-25-to-5",
   "step": "/files/hardware/can-engine-printed-kit/hub-platter-25-to-5.step",
   "stl": "/files/hardware/can-engine-printed-kit/hub-platter-25-to-5.stl",
   "note": "3.5 in HDD platter hub: \u00d825 spigot \u2192 \u00d85 shaft"
  },
  {
   "name": "syringe-cradle-10ml",
   "step": "/files/hardware/can-engine-printed-kit/syringe-cradle-10ml.step",
   "stl": "/files/hardware/can-engine-printed-kit/syringe-cradle-10ml.stl",
   "note": "cradle for a 10ml syringe (\u00d815.9 barrel), 4 \u00d7 M3 to the frame"
  },
  {
   "name": "syringe-cradle-20ml",
   "step": "/files/hardware/can-engine-printed-kit/syringe-cradle-20ml.step",
   "stl": "/files/hardware/can-engine-printed-kit/syringe-cradle-20ml.stl",
   "note": "cradle for a 20ml syringe (\u00d821.0 barrel), 4 \u00d7 M3 to the frame"
  },
  {
   "name": "syringe-cradle-60ml",
   "step": "/files/hardware/can-engine-printed-kit/syringe-cradle-60ml.step",
   "stl": "/files/hardware/can-engine-printed-kit/syringe-cradle-60ml.stl",
   "note": "cradle for a 60ml syringe (\u00d829.0 barrel), 4 \u00d7 M3 to the frame"
  },
  {
   "name": "displacer-foam-62x30-template",
   "step": "/files/hardware/can-engine-printed-kit/displacer-foam-62x30-template.step",
   "stl": "/files/hardware/can-engine-printed-kit/displacer-foam-62x30-template.stl",
   "note": "displacer envelope for a \u00d866 can: \u00d862 \u00d7 30 (cut from foam or print hollow), \u00d82.5 rod hole"
  },
  {
   "name": "displacer-foam-54x25-template",
   "step": "/files/hardware/can-engine-printed-kit/displacer-foam-54x25-template.step",
   "stl": "/files/hardware/can-engine-printed-kit/displacer-foam-54x25-template.stl",
   "note": "displacer for a \u00d858 sleek can: \u00d854 \u00d7 25"
  },
  {
   "name": "displacer-foam-72x35-template",
   "step": "/files/hardware/can-engine-printed-kit/displacer-foam-72x35-template.step",
   "stl": "/files/hardware/can-engine-printed-kit/displacer-foam-72x35-template.stl",
   "note": "displacer for a \u00d876 steel can: \u00d872 \u00d7 35"
  }
 ]
}