{
 "object": "clevis-pins-iso-2341",
 "license": "CC BY 4.0, Xem Studio",
 "files": [
  {
   "name": "clevis-pin-iso-2341-b-4x20",
   "step": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-4x20.step",
   "stl": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-4x20.stl",
   "note": "clevis pin with head, ISO 2341 form B (with split-pin hole): shank Ø4 × 20 mm under the head (example length, Xem's choice), head Ø6 × 1 mm, under-head radius 0.6 mm, split-pin hole Ø1 across the shank with its axis 2.2 mm (le min) from the pin end (example position, le is a minimum in the standard); no end or head chamfer (their angle is not in the sources read)"
  },
  {
   "name": "clevis-pin-iso-2341-b-5x25",
   "step": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-5x25.step",
   "stl": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-5x25.stl",
   "note": "clevis pin with head, ISO 2341 form B (with split-pin hole): shank Ø5 × 25 mm under the head (example length, Xem's choice), head Ø8 × 1.6 mm, under-head radius 0.6 mm, split-pin hole Ø1.2 across the shank with its axis 2.9 mm (le min) from the pin end (example position, le is a minimum in the standard); no end or head chamfer (their angle is not in the sources read)"
  },
  {
   "name": "clevis-pin-iso-2341-b-6x30",
   "step": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-6x30.step",
   "stl": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-6x30.stl",
   "note": "clevis pin with head, ISO 2341 form B (with split-pin hole): shank Ø6 × 30 mm under the head (example length, Xem's choice), head Ø10 × 2 mm, under-head radius 0.6 mm, split-pin hole Ø1.6 across the shank with its axis 3.2 mm (le min) from the pin end (example position, le is a minimum in the standard); no end or head chamfer (their angle is not in the sources read)"
  },
  {
   "name": "clevis-pin-iso-2341-b-8x40",
   "step": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-8x40.step",
   "stl": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-8x40.stl",
   "note": "clevis pin with head, ISO 2341 form B (with split-pin hole): shank Ø8 × 40 mm under the head (example length, Xem's choice), head Ø14 × 3 mm, under-head radius 0.6 mm, split-pin hole Ø2 across the shank with its axis 3.5 mm (le min) from the pin end (example position, le is a minimum in the standard); no end or head chamfer (their angle is not in the sources read)"
  },
  {
   "name": "clevis-pin-iso-2341-b-10x50",
   "step": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-10x50.step",
   "stl": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-10x50.stl",
   "note": "clevis pin with head, ISO 2341 form B (with split-pin hole): shank Ø10 × 50 mm under the head (example length, Xem's choice), head Ø18 × 4 mm, under-head radius 0.6 mm, split-pin hole Ø3.2 across the shank with its axis 4.5 mm (le min) from the pin end (example position, le is a minimum in the standard); no end or head chamfer (their angle is not in the sources read)"
  },
  {
   "name": "clevis-pin-iso-2341-b-12x60",
   "step": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-12x60.step",
   "stl": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-12x60.stl",
   "note": "clevis pin with head, ISO 2341 form B (with split-pin hole): shank Ø12 × 60 mm under the head (example length, Xem's choice), head Ø20 × 4 mm, under-head radius 0.6 mm, split-pin hole Ø3.2 across the shank with its axis 5.5 mm (le min) from the pin end (example position, le is a minimum in the standard); no end or head chamfer (their angle is not in the sources read)"
  },
  {
   "name": "clevis-pin-iso-2341-b-16x80",
   "step": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-16x80.step",
   "stl": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-16x80.stl",
   "note": "clevis pin with head, ISO 2341 form B (with split-pin hole): shank Ø16 × 80 mm under the head (example length, Xem's choice), head Ø25 × 4.5 mm, under-head radius 0.6 mm, split-pin hole Ø4 across the shank with its axis 6 mm (le min) from the pin end (example position, le is a minimum in the standard); no end or head chamfer (their angle is not in the sources read)"
  },
  {
   "name": "clevis-pin-iso-2341-b-20x100",
   "step": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-20x100.step",
   "stl": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-b-20x100.stl",
   "note": "clevis pin with head, ISO 2341 form B (with split-pin hole): shank Ø20 × 100 mm under the head (example length, Xem's choice), head Ø30 × 5 mm, under-head radius 1 mm, split-pin hole Ø5 across the shank with its axis 8 mm (le min) from the pin end (example position, le is a minimum in the standard); no end or head chamfer (their angle is not in the sources read)"
  },
  {
   "name": "clevis-pin-iso-2341-a-6x30",
   "step": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-a-6x30.step",
   "stl": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-a-6x30.stl",
   "note": "clevis pin with head, ISO 2341 form A (without split-pin hole): shank Ø6 × 30 mm under the head (example length, Xem's choice), head Ø10 × 2 mm, under-head radius 0.6 mm; no end or head chamfer (their angle is not in the sources read)"
  },
  {
   "name": "clevis-pin-iso-2341-a-10x50",
   "step": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-a-10x50.step",
   "stl": "/files/hardware/clevis-pins-iso-2341/clevis-pin-iso-2341-a-10x50.stl",
   "note": "clevis pin with head, ISO 2341 form A (without split-pin hole): shank Ø10 × 50 mm under the head (example length, Xem's choice), head Ø18 × 4 mm, under-head radius 0.6 mm; no end or head chamfer (their angle is not in the sources read)"
  }
 ]
}