{
 "object": "gt2-timing-pulleys-18-60t-bores",
 "license": "CC BY 4.0, Xem Studio",
 "files": [
  {
   "name": "gt2-18t-b5-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-18t-b5-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-18t-b5-w6.stl",
   "note": "GT2 18T pulley for a 6 mm belt, bore Ø5: tooth section 7 wide (Misumi's belt-width block), flanges Ø16 (Misumi F) x 1 thick (example), PD 11.46, OD 10.95; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-20t-b5-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-20t-b5-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-20t-b5-w6.stl",
   "note": "GT2 20T pulley for a 6 mm belt, bore Ø5: tooth section 7 wide (Misumi's belt-width block), flanges Ø17 (Misumi F) x 1 thick (example), PD 12.73, OD 12.22; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-20t-b6-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-20t-b6-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-20t-b6-w6.stl",
   "note": "GT2 20T pulley for a 6 mm belt, bore Ø6: tooth section 7 wide (Misumi's belt-width block), flanges Ø17 (Misumi F) x 1 thick (example), PD 12.73, OD 12.22; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-24t-b5-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-24t-b5-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-24t-b5-w6.stl",
   "note": "GT2 24T pulley for a 6 mm belt, bore Ø5: tooth section 7 wide (Misumi's belt-width block), flanges Ø20 (Misumi F) x 1 thick (example), PD 15.28, OD 14.77; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-24t-b6-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-24t-b6-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-24t-b6-w6.stl",
   "note": "GT2 24T pulley for a 6 mm belt, bore Ø6: tooth section 7 wide (Misumi's belt-width block), flanges Ø20 (Misumi F) x 1 thick (example), PD 15.28, OD 14.77; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-24t-b8-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-24t-b8-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-24t-b8-w6.stl",
   "note": "GT2 24T pulley for a 6 mm belt, bore Ø8: tooth section 7 wide (Misumi's belt-width block), flanges Ø20 (Misumi F) x 1 thick (example), PD 15.28, OD 14.77; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-30t-b5-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b5-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b5-w6.stl",
   "note": "GT2 30T pulley for a 6 mm belt, bore Ø5: tooth section 7 wide (Misumi's belt-width block), flanges Ø24 (Misumi F) x 1 thick (example), PD 19.10, OD 18.59; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-30t-b6-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b6-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b6-w6.stl",
   "note": "GT2 30T pulley for a 6 mm belt, bore Ø6: tooth section 7 wide (Misumi's belt-width block), flanges Ø24 (Misumi F) x 1 thick (example), PD 19.10, OD 18.59; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-30t-b8-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b8-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b8-w6.stl",
   "note": "GT2 30T pulley for a 6 mm belt, bore Ø8: tooth section 7 wide (Misumi's belt-width block), flanges Ø24 (Misumi F) x 1 thick (example), PD 19.10, OD 18.59; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-36t-b6-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-36t-b6-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-36t-b6-w6.stl",
   "note": "GT2 36T pulley for a 6 mm belt, bore Ø6: tooth section 7 wide (Misumi's belt-width block), flanges Ø27 (Misumi F) x 1 thick (example), PD 22.92, OD 22.41; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-36t-b8-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-36t-b8-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-36t-b8-w6.stl",
   "note": "GT2 36T pulley for a 6 mm belt, bore Ø8: tooth section 7 wide (Misumi's belt-width block), flanges Ø27 (Misumi F) x 1 thick (example), PD 22.92, OD 22.41; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-40t-b6-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-40t-b6-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-40t-b6-w6.stl",
   "note": "GT2 40T pulley for a 6 mm belt, bore Ø6: tooth section 7 wide (Misumi's belt-width block), flanges Ø30 (Misumi F) x 1 thick (example), PD 25.46, OD 24.96; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-40t-b8-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-40t-b8-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-40t-b8-w6.stl",
   "note": "GT2 40T pulley for a 6 mm belt, bore Ø8: tooth section 7 wide (Misumi's belt-width block), flanges Ø30 (Misumi F) x 1 thick (example), PD 25.46, OD 24.96; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-48t-b8-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-48t-b8-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-48t-b8-w6.stl",
   "note": "GT2 48T pulley for a 6 mm belt, bore Ø8: tooth section 7 wide (Misumi's belt-width block), flanges Ø35 (Misumi F) x 1 thick (example), PD 30.56, OD 30.05; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-60t-b8-w6",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-60t-b8-w6.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-60t-b8-w6.stl",
   "note": "GT2 60T pulley for a 6 mm belt, bore Ø8: tooth section 7 wide (Misumi's belt-width block), flanges Ø42 (Misumi F) x 1 thick (example), PD 38.20, OD 37.69; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-20t-b5-w9",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-20t-b5-w9.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-20t-b5-w9.stl",
   "note": "GT2 20T pulley for a 9 mm belt, bore Ø5: tooth section 10 wide (Misumi's belt-width block), flanges Ø17 (Misumi F) x 1 thick (example), PD 12.73, OD 12.22; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-20t-b6-w9",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-20t-b6-w9.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-20t-b6-w9.stl",
   "note": "GT2 20T pulley for a 9 mm belt, bore Ø6: tooth section 10 wide (Misumi's belt-width block), flanges Ø17 (Misumi F) x 1 thick (example), PD 12.73, OD 12.22; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-30t-b5-w9",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b5-w9.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b5-w9.stl",
   "note": "GT2 30T pulley for a 9 mm belt, bore Ø5: tooth section 10 wide (Misumi's belt-width block), flanges Ø24 (Misumi F) x 1 thick (example), PD 19.10, OD 18.59; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-30t-b6-w9",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b6-w9.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b6-w9.stl",
   "note": "GT2 30T pulley for a 9 mm belt, bore Ø6: tooth section 10 wide (Misumi's belt-width block), flanges Ø24 (Misumi F) x 1 thick (example), PD 19.10, OD 18.59; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-30t-b8-w9",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b8-w9.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-30t-b8-w9.stl",
   "note": "GT2 30T pulley for a 9 mm belt, bore Ø8: tooth section 10 wide (Misumi's belt-width block), flanges Ø24 (Misumi F) x 1 thick (example), PD 19.10, OD 18.59; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-40t-b6-w9",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-40t-b6-w9.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-40t-b6-w9.stl",
   "note": "GT2 40T pulley for a 9 mm belt, bore Ø6: tooth section 10 wide (Misumi's belt-width block), flanges Ø30 (Misumi F) x 1 thick (example), PD 25.46, OD 24.96; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-40t-b8-w9",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-40t-b8-w9.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-40t-b8-w9.stl",
   "note": "GT2 40T pulley for a 9 mm belt, bore Ø8: tooth section 10 wide (Misumi's belt-width block), flanges Ø30 (Misumi F) x 1 thick (example), PD 25.46, OD 24.96; approximate round-groove tooth form, no hub, no set screws"
  },
  {
   "name": "gt2-60t-b8-w9",
   "step": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-60t-b8-w9.step",
   "stl": "/files/hardware/gt2-timing-pulleys-18-60t-bores/gt2-60t-b8-w9.stl",
   "note": "GT2 60T pulley for a 9 mm belt, bore Ø8: tooth section 10 wide (Misumi's belt-width block), flanges Ø42 (Misumi F) x 1 thick (example), PD 38.20, OD 37.69; approximate round-groove tooth form, no hub, no set screws"
  }
 ]
}