{
 "object": "iso-15552-pneumatic-cylinder-mounting",
 "license": "CC BY 4.0, Xem Studio",
 "files": [
  {
   "name": "iso-15552-end-cap-template-32mm",
   "step": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-32mm.step",
   "stl": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-32mm.stl",
   "note": "mounting-pattern template for an ISO 15552 Ø32 cylinder end cap: 80.5 × 56.5 × 8 mm plate, four holes on the TG = 32.5 mm square drawn at the nominal major diameter of the end-cap thread M6 (Ø6; a through-hole for a bolt is a different size, open it for your fastener), one centre hole at the spigot B = Ø30 (d11 nominal). Plate size, thickness and corner radius are Xem choices"
  },
  {
   "name": "iso-15552-end-cap-template-40mm",
   "step": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-40mm.step",
   "stl": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-40mm.stl",
   "note": "mounting-pattern template for an ISO 15552 Ø40 cylinder end cap: 86 × 62.0 × 8 mm plate, four holes on the TG = 38 mm square drawn at the nominal major diameter of the end-cap thread M6 (Ø6; a through-hole for a bolt is a different size, open it for your fastener), one centre hole at the spigot B = Ø35 (d11 nominal). Plate size, thickness and corner radius are Xem choices"
  },
  {
   "name": "iso-15552-end-cap-template-50mm",
   "step": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-50mm.step",
   "stl": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-50mm.stl",
   "note": "mounting-pattern template for an ISO 15552 Ø50 cylinder end cap: 94.5 × 70.5 × 8 mm plate, four holes on the TG = 46.5 mm square drawn at the nominal major diameter of the end-cap thread M8 (Ø8; a through-hole for a bolt is a different size, open it for your fastener), one centre hole at the spigot B = Ø40 (d11 nominal). Plate size, thickness and corner radius are Xem choices"
  },
  {
   "name": "iso-15552-end-cap-template-63mm",
   "step": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-63mm.step",
   "stl": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-63mm.stl",
   "note": "mounting-pattern template for an ISO 15552 Ø63 cylinder end cap: 104.5 × 80.5 × 8 mm plate, four holes on the TG = 56.5 mm square drawn at the nominal major diameter of the end-cap thread M8 (Ø8; a through-hole for a bolt is a different size, open it for your fastener), one centre hole at the spigot B = Ø45 (d11 nominal). Plate size, thickness and corner radius are Xem choices"
  },
  {
   "name": "iso-15552-end-cap-template-80mm",
   "step": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-80mm.step",
   "stl": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-80mm.stl",
   "note": "mounting-pattern template for an ISO 15552 Ø80 cylinder end cap: 120 × 96.0 × 8 mm plate, four holes on the TG = 72 mm square drawn at the nominal major diameter of the end-cap thread M10 (Ø10; a through-hole for a bolt is a different size, open it for your fastener), one centre hole at the spigot B = Ø45 (d11 nominal). Plate size, thickness and corner radius are Xem choices"
  },
  {
   "name": "iso-15552-end-cap-template-100mm",
   "step": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-100mm.step",
   "stl": "/files/hardware/iso-15552-pneumatic-cylinder-mounting/iso-15552-end-cap-template-100mm.stl",
   "note": "mounting-pattern template for an ISO 15552 Ø100 cylinder end cap: 137 × 113.0 × 8 mm plate, four holes on the TG = 89 mm square drawn at the nominal major diameter of the end-cap thread M10 (Ø10; a through-hole for a bolt is a different size, open it for your fastener), one centre hole at the spigot B = Ø55 (d11 nominal). Plate size, thickness and corner radius are Xem choices"
  }
 ]
}