{
 "object": "linear-alternator-module-open-frame-2in",
 "license": "CC BY 4.0, Xem Studio",
 "les": "https://longearthsociety.com/engineering/",
 "files": [
  {
   "name": "la-frame-base-2in-ferrule",
   "step": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-base-2in-ferrule.step",
   "stl": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-base-2in-ferrule.stl",
   "note": "frame base: 2 in ISO 2852 end-cap face (clamps on the 42 mm spool's ferrule with a Type B gasket and a standard clamp), Ø50.8 neck to 9.5, 45° cone to Ø80, flat top at 28 with the leaf-1 rim seat (annulus Ø47.5–Ø64 × 0.8), bore Ø47.5 through, 3 × M3 tapped (Ø2.5 × 7.5) on r 36"
  },
  {
   "name": "la-frame-leaf-clamp-ring-80-posts10",
   "step": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-leaf-clamp-ring-80-posts10.step",
   "stl": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-leaf-clamp-ring-80-posts10.stl",
   "note": "lower leaf clamp ring with posts: Ø80 / Ø47.5 × 3 on leaf 1's rim, three Ø8 × 10 posts on r 36 carrying the stator sleeve, Ø3.4 through each post"
  },
  {
   "name": "la-frame-stator-sleeve-48x66",
   "step": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-stator-sleeve-48x66.step",
   "stl": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-stator-sleeve-48x66.stl",
   "note": "stator sleeve: bore Ø48.00 × 66 (the magnet carrier's running gap), Ø50.8 outside under the stator teeth, lower flange Ø80 × 5 with 3 × Ø3.4 on r 36, 45° cone to the Ø64 top flange (the bobbin's Ø65 bore passes over it), 3 × M3 tapped (Ø2.5 × 8) in the top on r 28.5"
  },
  {
   "name": "la-frame-stator-top-plate-80-posts5",
   "step": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-stator-top-plate-80-posts5.step",
   "stl": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-stator-top-plate-80-posts5.stl",
   "note": "stator top plate with posts: Ø80 / Ø48 × 5, 3 × Ø3.4 on r 28.5 to the sleeve, three Ø8 × 5 posts on r 36, M3 tapped (Ø2.5) through post and plate"
  },
  {
   "name": "la-frame-leaf-seat-ring-80",
   "step": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-leaf-seat-ring-80.step",
   "stl": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-leaf-seat-ring-80.stl",
   "note": "leaf-2 seat ring: Ø80 / Ø47.5 × 4, rim seat annulus Ø47.5–Ø64 × 0.8 in the top face, 3 × Ø3.4 on r 36"
  },
  {
   "name": "la-frame-leaf-clamp-ring-80",
   "step": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-leaf-clamp-ring-80.step",
   "stl": "/files/hardware/linear-alternator-module-open-frame-2in/la-frame-leaf-clamp-ring-80.stl",
   "note": "upper leaf clamp ring: Ø80 / Ø47.5 × 3 on leaf 2's rim, 3 × Ø3.4 on r 36"
  }
 ]
}