{
 "object": "oring-grooves-metric",
 "license": "CC BY 4.0, Xem Studio",
 "files": [
  {
   "name": "groove-radial-piston-sample-cs1",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs1.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs1.stl",
   "note": "1 mm cross-section, static radial groove in a piston-style sample ring: depth 0.7 mm, width 1.4 mm, bottom radius 0.2 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs1",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs1.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs1.stl",
   "note": "1 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 0.7 mm, width 1.4 mm, bottom radius 0.2 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  },
  {
   "name": "groove-radial-piston-sample-cs1p5",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs1p5.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs1p5.stl",
   "note": "1.5 mm cross-section, static radial groove in a piston-style sample ring: depth 1.1 mm, width 2 mm, bottom radius 0.3 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs1p5",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs1p5.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs1p5.stl",
   "note": "1.5 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 1.1 mm, width 2.1 mm, bottom radius 0.3 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  },
  {
   "name": "groove-radial-piston-sample-cs1p78",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs1p78.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs1p78.stl",
   "note": "1.78 mm cross-section, static radial groove in a piston-style sample ring: depth 1.3 mm, width 2.4 mm, bottom radius 0.3 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs1p78",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs1p78.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs1p78.stl",
   "note": "1.78 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 1.3 mm, width 2.6 mm, bottom radius 0.3 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  },
  {
   "name": "groove-radial-piston-sample-cs2",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs2.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs2.stl",
   "note": "2 mm cross-section, static radial groove in a piston-style sample ring: depth 1.5 mm, width 2.7 mm, bottom radius 0.3 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs2",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs2.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs2.stl",
   "note": "2 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 1.5 mm, width 2.8 mm, bottom radius 0.3 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  },
  {
   "name": "groove-radial-piston-sample-cs2p5",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs2p5.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs2p5.stl",
   "note": "2.5 mm cross-section, static radial groove in a piston-style sample ring: depth 1.9 mm, width 3.3 mm, bottom radius 0.3 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs2p5",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs2p5.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs2p5.stl",
   "note": "2.5 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 1.9 mm, width 3.4 mm, bottom radius 0.3 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  },
  {
   "name": "groove-radial-piston-sample-cs2p62",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs2p62.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs2p62.stl",
   "note": "2.62 mm cross-section, static radial groove in a piston-style sample ring: depth 2 mm, width 3.6 mm, bottom radius 0.3 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs2p62",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs2p62.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs2p62.stl",
   "note": "2.62 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 2 mm, width 3.8 mm, bottom radius 0.3 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  },
  {
   "name": "groove-radial-piston-sample-cs3",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs3.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs3.stl",
   "note": "3 mm cross-section, static radial groove in a piston-style sample ring: depth 2.3 mm, width 4 mm, bottom radius 0.6 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs3",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs3.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs3.stl",
   "note": "3 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 2.3 mm, width 4 mm, bottom radius 0.6 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  },
  {
   "name": "groove-radial-piston-sample-cs3p53",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs3p53.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs3p53.stl",
   "note": "3.53 mm cross-section, static radial groove in a piston-style sample ring: depth 2.7 mm, width 4.8 mm, bottom radius 0.6 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs3p53",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs3p53.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs3p53.stl",
   "note": "3.53 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 2.7 mm, width 5 mm, bottom radius 0.6 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  },
  {
   "name": "groove-radial-piston-sample-cs4",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs4.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs4.stl",
   "note": "4 mm cross-section, static radial groove in a piston-style sample ring: depth 3.1 mm, width 5.2 mm, bottom radius 0.6 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs4",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs4.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs4.stl",
   "note": "4 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 3.1 mm, width 5.3 mm, bottom radius 0.6 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  },
  {
   "name": "groove-radial-piston-sample-cs5p33",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs5p33.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs5p33.stl",
   "note": "5.33 mm cross-section, static radial groove in a piston-style sample ring: depth 4.3 mm, width 7.1 mm, bottom radius 0.6 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs5p33",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs5p33.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs5p33.stl",
   "note": "5.33 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 4.3 mm, width 7.3 mm, bottom radius 0.6 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  },
  {
   "name": "groove-radial-piston-sample-cs5p7",
   "step": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs5p7.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-radial-piston-sample-cs5p7.stl",
   "note": "5.7 mm cross-section, static radial groove in a piston-style sample ring: depth 4.6 mm, width 7.2 mm, bottom radius 0.6 mm. Ring Ø 50 mm, hole Ø 30 mm, 4 mm lands (sample layout). No clearance is printed, so the ring is drawn at the 50 mm bore with the groove cut from it."
  },
  {
   "name": "groove-face-plate-sample-cs5p7",
   "step": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs5p7.step",
   "stl": "/files/hardware/oring-grooves-metric/groove-face-plate-sample-cs5p7.stl",
   "note": "5.7 mm cross-section, axial (face) groove in an 80 mm plate, 12 mm thick: depth 4.6 mm, width 7.4 mm, bottom radius 0.6 mm, groove outer Ø 60 mm (sample layout). Mouth sharp, walls square."
  }
 ]
}