{
 "object": "pushbutton-pilot-light-panel-holes",
 "license": "CC BY 4.0, Xem Studio",
 "files": [
  {
   "name": "pushbutton-hole-gauge-12p2-16p2-19p2-22p2",
   "step": "/files/hardware/pushbutton-pilot-light-panel-holes/pushbutton-hole-gauge-12p2-16p2-19p2-22p2.step",
   "stl": "/files/hardware/pushbutton-pilot-light-panel-holes/pushbutton-hole-gauge-12p2-16p2-19p2-22p2.stl",
   "note": "hole gauge plate, 99.8 x 34.2 x 3 mm, four round holes at the APEM panel cut-outs 12.2, 16.2, 19.2 and 22.2 mm (APEM 1200 and AV series), smallest first, 6 mm between hole edges and 6 mm of plate round the largest hole; no anti-rotation notch is drawn; plate thickness and spacing are Xem choices"
  },
  {
   "name": "pushbutton-hole-gauge-22p3-25-30-30p5",
   "step": "/files/hardware/pushbutton-pilot-light-panel-holes/pushbutton-hole-gauge-22p3-25-30-30p5.step",
   "stl": "/files/hardware/pushbutton-pilot-light-panel-holes/pushbutton-hole-gauge-22p3-25-30-30p5.stl",
   "note": "hole gauge plate, 137.8 x 42.5 x 3 mm, four round holes at 22.3 mm (Omron A22), 25 mm and 30 mm (Omron) and 30.5 mm (Fuji Electric 30 mm sheet), nominal diameters (the makers' tolerances are +0.4 / 0, +0.5 / 0, +0.4 / 0 on the Omron holes), smallest first, 6 mm between hole edges and 6 mm of plate round the largest hole; no notch or location hole is drawn; plate thickness and spacing are Xem choices"
  }
 ]
}