{
 "object": "retaining-rings-din-471-external",
 "license": "CC BY 4.0, Xem Studio",
 "files": [
  {
   "name": "groove-gauge-shaft-8mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-8mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-8mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø8 × 32 mm shaft with the DIN 471 ring groove: groove Ø7.6 (d2) × 0.9 mm wide (m), groove centre 12 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-shaft-10mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-10mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-10mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø10 × 40 mm shaft with the DIN 471 ring groove: groove Ø9.6 (d2) × 1.1 mm wide (m), groove centre 15 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-shaft-12mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-12mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-12mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø12 × 48 mm shaft with the DIN 471 ring groove: groove Ø11.5 (d2) × 1.1 mm wide (m), groove centre 18 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-shaft-15mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-15mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-15mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø15 × 60 mm shaft with the DIN 471 ring groove: groove Ø14.3 (d2) × 1.1 mm wide (m), groove centre 22.5 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-shaft-17mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-17mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-17mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø17 × 68 mm shaft with the DIN 471 ring groove: groove Ø16.2 (d2) × 1.1 mm wide (m), groove centre 25.5 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-shaft-20mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-20mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-20mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø20 × 80 mm shaft with the DIN 471 ring groove: groove Ø19 (d2) × 1.3 mm wide (m), groove centre 30 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-shaft-25mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-25mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-25mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø25 × 100 mm shaft with the DIN 471 ring groove: groove Ø23.9 (d2) × 1.3 mm wide (m), groove centre 37.5 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-shaft-30mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-30mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-30mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø30 × 120 mm shaft with the DIN 471 ring groove: groove Ø28.6 (d2) × 1.6 mm wide (m), groove centre 45 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-shaft-35mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-35mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-35mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø35 × 140 mm shaft with the DIN 471 ring groove: groove Ø33 (d2) × 1.6 mm wide (m), groove centre 52.5 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-shaft-40mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-40mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-40mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø40 × 160 mm shaft with the DIN 471 ring groove: groove Ø37.5 (d2) × 1.85 mm wide (m), groove centre 60 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-shaft-50mm-din-471",
   "step": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-50mm-din-471.step",
   "stl": "/files/hardware/retaining-rings-din-471-external/groove-gauge-shaft-50mm-din-471.stl",
   "note": "Half-section (cut along the axis, flat face down) of a Ø50 × 200 mm shaft with the DIN 471 ring groove: groove Ø47 (d2) × 2.15 mm wide (m), groove centre 75 mm from one end; nominal values, no chamfers; length and groove position are an example, d1, d2 and m are the standard's"
  }
 ]
}