{
 "object": "retaining-rings-din-472-internal",
 "license": "CC BY 4.0, Xem Studio",
 "files": [
  {
   "name": "groove-gauge-bore-10mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-10mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-10mm-din-472.stl",
   "note": "Sleeve with a Ø10 bore and the DIN 472 ring groove: groove Ø10.4 (d2) × 1.1 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø16.4; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-bore-12mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-12mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-12mm-din-472.stl",
   "note": "Sleeve with a Ø12 bore and the DIN 472 ring groove: groove Ø12.5 (d2) × 1.1 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø18.5; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-bore-15mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-15mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-15mm-din-472.stl",
   "note": "Sleeve with a Ø15 bore and the DIN 472 ring groove: groove Ø15.7 (d2) × 1.1 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø21.7; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-bore-17mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-17mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-17mm-din-472.stl",
   "note": "Sleeve with a Ø17 bore and the DIN 472 ring groove: groove Ø17.8 (d2) × 1.1 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø23.8; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-bore-20mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-20mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-20mm-din-472.stl",
   "note": "Sleeve with a Ø20 bore and the DIN 472 ring groove: groove Ø21 (d2) × 1.1 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø27; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-bore-25mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-25mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-25mm-din-472.stl",
   "note": "Sleeve with a Ø25 bore and the DIN 472 ring groove: groove Ø26.2 (d2) × 1.3 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø32.2; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-bore-30mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-30mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-30mm-din-472.stl",
   "note": "Sleeve with a Ø30 bore and the DIN 472 ring groove: groove Ø31.4 (d2) × 1.3 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø37.4; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-bore-35mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-35mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-35mm-din-472.stl",
   "note": "Sleeve with a Ø35 bore and the DIN 472 ring groove: groove Ø37 (d2) × 1.6 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø43; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-bore-40mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-40mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-40mm-din-472.stl",
   "note": "Sleeve with a Ø40 bore and the DIN 472 ring groove: groove Ø42.5 (d2) × 1.85 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø48.5; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-bore-50mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-50mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-50mm-din-472.stl",
   "note": "Sleeve with a Ø50 bore and the DIN 472 ring groove: groove Ø53 (d2) × 2.15 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø59; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  },
  {
   "name": "groove-gauge-bore-62mm-din-472",
   "step": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-62mm-din-472.step",
   "stl": "/files/hardware/retaining-rings-din-472-internal/groove-gauge-bore-62mm-din-472.stl",
   "note": "Sleeve with a Ø62 bore and the DIN 472 ring groove: groove Ø65 (d2) × 2.15 mm wide (m), 16 mm long, groove centre 6 mm from the top, outside Ø71; nominal values; the outside diameter, length and groove position are an example, d1, d2 and m are the standard's"
  }
 ]
}