{
 "object": "square-taper-washers-din-434",
 "license": "CC BY 4.0, Xem Studio",
 "files": [
  {
   "name": "din434-m8",
   "step": "/files/hardware/square-taper-washers-din-434/din434-m8.step",
   "stl": "/files/hardware/square-taper-washers-din-434/din434-m8.stl",
   "note": "DIN 434 M8: 22×22, hole 9, thickness 2.9–4.7 (h 3.8 at the hole), 8 %"
  },
  {
   "name": "din434-m10",
   "step": "/files/hardware/square-taper-washers-din-434/din434-m10.step",
   "stl": "/files/hardware/square-taper-washers-din-434/din434-m10.stl",
   "note": "DIN 434 M10: 22×22, hole 11, thickness 2.9–4.7 (h 3.8 at the hole), 8 %"
  },
  {
   "name": "din434-m12",
   "step": "/files/hardware/square-taper-washers-din-434/din434-m12.step",
   "stl": "/files/hardware/square-taper-washers-din-434/din434-m12.stl",
   "note": "DIN 434 M12: 26×30, hole 13.5, thickness 3.7–6.1 (h 4.9 at the hole), 8 %"
  },
  {
   "name": "din434-m16",
   "step": "/files/hardware/square-taper-washers-din-434/din434-m16.step",
   "stl": "/files/hardware/square-taper-washers-din-434/din434-m16.stl",
   "note": "DIN 434 M16: 32×36, hole 17.5, thickness 4.45–7.35 (h 5.9 at the hole), 8 %"
  },
  {
   "name": "din434-m20",
   "step": "/files/hardware/square-taper-washers-din-434/din434-m20.step",
   "stl": "/files/hardware/square-taper-washers-din-434/din434-m20.stl",
   "note": "DIN 434 M20: 40×44, hole 22, thickness 5.25–8.75 (h 7 at the hole), 8 %"
  },
  {
   "name": "din434-m22",
   "step": "/files/hardware/square-taper-washers-din-434/din434-m22.step",
   "stl": "/files/hardware/square-taper-washers-din-434/din434-m22.stl",
   "note": "DIN 434 M22: 44×50, hole 24, thickness 6–10 (h 8 at the hole), 8 %"
  },
  {
   "name": "din434-m24",
   "step": "/files/hardware/square-taper-washers-din-434/din434-m24.step",
   "stl": "/files/hardware/square-taper-washers-din-434/din434-m24.stl",
   "note": "DIN 434 M24: 56×56, hole 26, thickness 6.26–10.74 (h 8.5 at the hole), 8 %"
  },
  {
   "name": "din434-m27",
   "step": "/files/hardware/square-taper-washers-din-434/din434-m27.step",
   "stl": "/files/hardware/square-taper-washers-din-434/din434-m27.stl",
   "note": "DIN 434 M27: 56×56, hole 30, thickness 6.26–10.74 (h 8.5 at the hole), 8 %"
  }
 ]
}