{
 "object": "stirling-shafts-and-rods",
 "license": "CC BY 4.0, Xem Studio",
 "les": "https://longearthsociety.com/engineering/",
 "files": [
  {
   "name": "rod-3x100",
   "step": "/files/hardware/stirling-shafts-and-rods/rod-3x100.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/rod-3x100.stl",
   "note": "\u00d83 \u00d7 100 solid rod: displacer rod (into the displacer cap's grub, through the guide / bushings / piston bushing, into the rod clevis)"
  },
  {
   "name": "rod-3x150",
   "step": "/files/hardware/stirling-shafts-and-rods/rod-3x150.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/rod-3x150.stl",
   "note": "\u00d83 \u00d7 150 solid rod: displacer rod (into the displacer cap's grub, through the guide / bushings / piston bushing, into the rod clevis)"
  },
  {
   "name": "rod-3x200",
   "step": "/files/hardware/stirling-shafts-and-rods/rod-3x200.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/rod-3x200.stl",
   "note": "\u00d83 \u00d7 200 solid rod: displacer rod (into the displacer cap's grub, through the guide / bushings / piston bushing, into the rod clevis)"
  },
  {
   "name": "crankshaft-3x40",
   "step": "/files/hardware/stirling-shafts-and-rods/crankshaft-3x40.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/crankshaft-3x40.stl",
   "note": "\u00d83 \u00d7 40 solid crankshaft for the crank head's 623 towers and the \u00d83-bore crank discs; can engine skewer replacement"
  },
  {
   "name": "crankshaft-3x60",
   "step": "/files/hardware/stirling-shafts-and-rods/crankshaft-3x60.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/crankshaft-3x60.stl",
   "note": "\u00d83 \u00d7 60 solid crankshaft for the crank head's 623 towers and the \u00d83-bore crank discs; can engine skewer replacement"
  },
  {
   "name": "crankshaft-3x80",
   "step": "/files/hardware/stirling-shafts-and-rods/crankshaft-3x80.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/crankshaft-3x80.stl",
   "note": "\u00d83 \u00d7 80 solid crankshaft for the crank head's 623 towers and the \u00d83-bore crank discs; can engine skewer replacement"
  },
  {
   "name": "crankshaft-5x80-dflat",
   "step": "/files/hardware/stirling-shafts-and-rods/crankshaft-5x80-dflat.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/crankshaft-5x80-dflat.stl",
   "note": "\u00d85 \u00d7 80 crankshaft with a full-length 0.5 mm D-flat (4.5 across) for the grubs; 625 crank stands, rhombic gears, crank discs, nut flywheel b5. Print flat side down"
  },
  {
   "name": "crankshaft-5x100-dflat",
   "step": "/files/hardware/stirling-shafts-and-rods/crankshaft-5x100-dflat.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/crankshaft-5x100-dflat.stl",
   "note": "\u00d85 \u00d7 100 crankshaft with a full-length 0.5 mm D-flat (4.5 across) for the grubs; 625 crank stands, rhombic gears, crank discs, nut flywheel b5. Print flat side down"
  },
  {
   "name": "crankshaft-5x120-dflat",
   "step": "/files/hardware/stirling-shafts-and-rods/crankshaft-5x120-dflat.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/crankshaft-5x120-dflat.stl",
   "note": "\u00d85 \u00d7 120 crankshaft with a full-length 0.5 mm D-flat (4.5 across) for the grubs; 625 crank stands, rhombic gears, crank discs, nut flywheel b5. Print flat side down"
  },
  {
   "name": "crankshaft-5x150-dflat",
   "step": "/files/hardware/stirling-shafts-and-rods/crankshaft-5x150-dflat.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/crankshaft-5x150-dflat.stl",
   "note": "\u00d85 \u00d7 150 crankshaft with a full-length 0.5 mm D-flat (4.5 across) for the grubs; 625 crank stands, rhombic gears, crank discs, nut flywheel b5. Print flat side down"
  },
  {
   "name": "crankshaft-8x80-dflat",
   "step": "/files/hardware/stirling-shafts-and-rods/crankshaft-8x80-dflat.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/crankshaft-8x80-dflat.stl",
   "note": "\u00d88 \u00d7 80 crankshaft with a full-length 0.5 mm D-flat (7.5 across); tri-clamp crank frame 608s, crank webs, flywheels b8. Print flat side down"
  },
  {
   "name": "crankshaft-8x100-dflat",
   "step": "/files/hardware/stirling-shafts-and-rods/crankshaft-8x100-dflat.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/crankshaft-8x100-dflat.stl",
   "note": "\u00d88 \u00d7 100 crankshaft with a full-length 0.5 mm D-flat (7.5 across); tri-clamp crank frame 608s, crank webs, flywheels b8. Print flat side down"
  },
  {
   "name": "crankshaft-8x120-dflat",
   "step": "/files/hardware/stirling-shafts-and-rods/crankshaft-8x120-dflat.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/crankshaft-8x120-dflat.stl",
   "note": "\u00d88 \u00d7 120 crankshaft with a full-length 0.5 mm D-flat (7.5 across); tri-clamp crank frame 608s, crank webs, flywheels b8. Print flat side down"
  },
  {
   "name": "tube-rod-5x3.4x80",
   "step": "/files/hardware/stirling-shafts-and-rods/tube-rod-5x3.4x80.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/tube-rod-5x3.4x80.stl",
   "note": "\u00d85 \u00d7 \u00d83.4 \u00d7 80 tube piston rod: into the piston plug socket, onto the rhombic lower yoke or the flexure collars; the \u00d83 displacer rod runs inside"
  },
  {
   "name": "tube-rod-5x3.4x120",
   "step": "/files/hardware/stirling-shafts-and-rods/tube-rod-5x3.4x120.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/tube-rod-5x3.4x120.stl",
   "note": "\u00d85 \u00d7 \u00d83.4 \u00d7 120 tube piston rod: into the piston plug socket, onto the rhombic lower yoke or the flexure collars; the \u00d83 displacer rod runs inside"
  },
  {
   "name": "tube-rod-5x3.4x160",
   "step": "/files/hardware/stirling-shafts-and-rods/tube-rod-5x3.4x160.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/tube-rod-5x3.4x160.stl",
   "note": "\u00d85 \u00d7 \u00d83.4 \u00d7 160 tube piston rod: into the piston plug socket, onto the rhombic lower yoke or the flexure collars; the \u00d83 displacer rod runs inside"
  },
  {
   "name": "pin-3x12",
   "step": "/files/hardware/stirling-shafts-and-rods/pin-3x12.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/pin-3x12.stl",
   "note": "\u00d83 \u00d7 12 pin: crank pin, wrist pin, link pivot (printed for fit checks; steel dowel for running)"
  },
  {
   "name": "pin-3x16",
   "step": "/files/hardware/stirling-shafts-and-rods/pin-3x16.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/pin-3x16.stl",
   "note": "\u00d83 \u00d7 16 pin: crank pin, wrist pin, link pivot (printed for fit checks; steel dowel for running)"
  },
  {
   "name": "pin-3x19",
   "step": "/files/hardware/stirling-shafts-and-rods/pin-3x19.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/pin-3x19.stl",
   "note": "\u00d83 \u00d7 19 pin: crank pin, wrist pin, link pivot (printed for fit checks; steel dowel for running)"
  },
  {
   "name": "pin-3x20",
   "step": "/files/hardware/stirling-shafts-and-rods/pin-3x20.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/pin-3x20.stl",
   "note": "\u00d83 \u00d7 20 pin: crank pin, wrist pin, link pivot (printed for fit checks; steel dowel for running)"
  },
  {
   "name": "spacer-3mm-t1",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-3mm-t1.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-3mm-t1.stl",
   "note": "thrust spacer for a \u00d83 shaft, 1 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-3mm-t2",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-3mm-t2.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-3mm-t2.stl",
   "note": "thrust spacer for a \u00d83 shaft, 2 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-3mm-t3",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-3mm-t3.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-3mm-t3.stl",
   "note": "thrust spacer for a \u00d83 shaft, 3 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-3mm-t5",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-3mm-t5.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-3mm-t5.stl",
   "note": "thrust spacer for a \u00d83 shaft, 5 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-5mm-t1",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-5mm-t1.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-5mm-t1.stl",
   "note": "thrust spacer for a \u00d85 shaft, 1 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-5mm-t2",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-5mm-t2.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-5mm-t2.stl",
   "note": "thrust spacer for a \u00d85 shaft, 2 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-5mm-t3",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-5mm-t3.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-5mm-t3.stl",
   "note": "thrust spacer for a \u00d85 shaft, 3 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-5mm-t5",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-5mm-t5.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-5mm-t5.stl",
   "note": "thrust spacer for a \u00d85 shaft, 5 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-8mm-t1",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-8mm-t1.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-8mm-t1.stl",
   "note": "thrust spacer for a \u00d88 shaft, 1 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-8mm-t2",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-8mm-t2.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-8mm-t2.stl",
   "note": "thrust spacer for a \u00d88 shaft, 2 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-8mm-t3",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-8mm-t3.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-8mm-t3.stl",
   "note": "thrust spacer for a \u00d88 shaft, 3 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  },
  {
   "name": "spacer-8mm-t5",
   "step": "/files/hardware/stirling-shafts-and-rods/spacer-8mm-t5.step",
   "stl": "/files/hardware/stirling-shafts-and-rods/spacer-8mm-t5.stl",
   "note": "thrust spacer for a \u00d88 shaft, 5 mm: sets the 1 mm gaps between tower, web, rod and flywheel"
  }
 ]
}