{
 "object": "tri-clamp-brewing-sensor-lids",
 "license": "CC BY 4.0, Xem Studio",
 "files": [
  {
   "name": "sensor-lid-4in-basic",
   "step": "/files/hardware/tri-clamp-brewing-sensor-lids/sensor-lid-4in-basic.step",
   "stl": "/files/hardware/tri-clamp-brewing-sensor-lids/sensor-lid-4in-basic.stl",
   "note": "4 in sensor lid (basic): 1½ in clamp port at the centre; on r 34: PG13.5 probe port, Ø6 probe gland, ¼ FNPT, ½ in blow-off barb"
  },
  {
   "name": "sensor-lid-6in-basic",
   "step": "/files/hardware/tri-clamp-brewing-sensor-lids/sensor-lid-6in-basic.step",
   "stl": "/files/hardware/tri-clamp-brewing-sensor-lids/sensor-lid-6in-basic.stl",
   "note": "6 in sensor lid (basic): 1½ in clamp port at the centre; on r 52: PG13.5 probe port, Ø6 probe gland, ¼ FNPT, ½ in blow-off barb"
  },
  {
   "name": "sensor-lid-6in-full",
   "step": "/files/hardware/tri-clamp-brewing-sensor-lids/sensor-lid-6in-full.step",
   "stl": "/files/hardware/tri-clamp-brewing-sensor-lids/sensor-lid-6in-full.stl",
   "note": "6 in sensor lid (full): 1½ in clamp port at the centre; on r 52: PG13.5 probe port, PG13.5 probe port, Ø6 probe gland, ¼ FNPT, ½ in blow-off barb, Ø6 probe gland, ¼ FNPT"
  },
  {
   "name": "sensor-lid-8in-basic",
   "step": "/files/hardware/tri-clamp-brewing-sensor-lids/sensor-lid-8in-basic.step",
   "stl": "/files/hardware/tri-clamp-brewing-sensor-lids/sensor-lid-8in-basic.stl",
   "note": "8 in sensor lid (basic): 1½ in clamp port at the centre; on r 70: PG13.5 probe port, Ø6 probe gland, ¼ FNPT, ½ in blow-off barb"
  },
  {
   "name": "sensor-lid-8in-full",
   "step": "/files/hardware/tri-clamp-brewing-sensor-lids/sensor-lid-8in-full.step",
   "stl": "/files/hardware/tri-clamp-brewing-sensor-lids/sensor-lid-8in-full.stl",
   "note": "8 in sensor lid (full): 1½ in clamp port at the centre; on r 70: PG13.5 probe port, PG13.5 probe port, Ø6 probe gland, ¼ FNPT, ½ in blow-off barb, Ø6 probe gland, ¼ FNPT"
  }
 ]
}