{
 "object": "tri-clamp-cups",
 "license": "CC BY 4.0, Xem Studio",
 "les": "https://longearthsociety.com/engineering/",
 "files": [
  {
   "name": "cup-1.5in-50",
   "step": "/files/hardware/tri-clamp-cups/cup-1.5in-50.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-1.5in-50.stl",
   "note": "1.5 in closed-end spool \u00d838.1 \u00d7 50: ISO 2852 ferrule face, 16 ga wall, 3 mm closed end with a 1.5 mm outer fillet (the weld); print closed end down"
  },
  {
   "name": "cup-1.5in-75",
   "step": "/files/hardware/tri-clamp-cups/cup-1.5in-75.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-1.5in-75.stl",
   "note": "1.5 in closed-end spool \u00d838.1 \u00d7 75: ISO 2852 ferrule face, 16 ga wall, 3 mm closed end with a 1.5 mm outer fillet (the weld); print closed end down"
  },
  {
   "name": "cup-1.5in-100",
   "step": "/files/hardware/tri-clamp-cups/cup-1.5in-100.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-1.5in-100.stl",
   "note": "1.5 in closed-end spool \u00d838.1 \u00d7 100: ISO 2852 ferrule face, 16 ga wall, 3 mm closed end with a 1.5 mm outer fillet (the weld); print closed end down"
  },
  {
   "name": "cup-1.5in-75-rod3",
   "step": "/files/hardware/tri-clamp-cups/cup-1.5in-75-rod3.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-1.5in-75-rod3.stl",
   "note": "1.5 in closed-end spool \u00d7 75 with a \u00d83.2 centre hole in the end for a displacer rod or gland"
  },
  {
   "name": "cup-2in-60",
   "step": "/files/hardware/tri-clamp-cups/cup-2in-60.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-2in-60.stl",
   "note": "2 in closed-end spool \u00d850.8 \u00d7 60: ISO 2852 ferrule face, 16 ga wall, 3 mm closed end with a 1.5 mm outer fillet (the weld); print closed end down"
  },
  {
   "name": "cup-2in-90",
   "step": "/files/hardware/tri-clamp-cups/cup-2in-90.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-2in-90.stl",
   "note": "2 in closed-end spool \u00d850.8 \u00d7 90: ISO 2852 ferrule face, 16 ga wall, 3 mm closed end with a 1.5 mm outer fillet (the weld); print closed end down"
  },
  {
   "name": "cup-2in-120",
   "step": "/files/hardware/tri-clamp-cups/cup-2in-120.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-2in-120.stl",
   "note": "2 in closed-end spool \u00d850.8 \u00d7 120: ISO 2852 ferrule face, 16 ga wall, 3 mm closed end with a 1.5 mm outer fillet (the weld); print closed end down"
  },
  {
   "name": "cup-2in-150",
   "step": "/files/hardware/tri-clamp-cups/cup-2in-150.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-2in-150.stl",
   "note": "2 in closed-end spool \u00d850.8 \u00d7 150: ISO 2852 ferrule face, 16 ga wall, 3 mm closed end with a 1.5 mm outer fillet (the weld); print closed end down"
  },
  {
   "name": "cup-2in-90-rod3",
   "step": "/files/hardware/tri-clamp-cups/cup-2in-90-rod3.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-2in-90-rod3.stl",
   "note": "2 in closed-end spool \u00d7 90 with a \u00d83.2 centre hole in the end for a displacer rod or gland"
  },
  {
   "name": "cup-3in-80",
   "step": "/files/hardware/tri-clamp-cups/cup-3in-80.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-3in-80.stl",
   "note": "3 in closed-end spool \u00d876.2 \u00d7 80: ISO 2852 ferrule face, 16 ga wall, 3 mm closed end with a 1.5 mm outer fillet (the weld); print closed end down"
  },
  {
   "name": "cup-3in-120",
   "step": "/files/hardware/tri-clamp-cups/cup-3in-120.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-3in-120.stl",
   "note": "3 in closed-end spool \u00d876.2 \u00d7 120: ISO 2852 ferrule face, 16 ga wall, 3 mm closed end with a 1.5 mm outer fillet (the weld); print closed end down"
  },
  {
   "name": "cup-3in-160",
   "step": "/files/hardware/tri-clamp-cups/cup-3in-160.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-3in-160.stl",
   "note": "3 in closed-end spool \u00d876.2 \u00d7 160: ISO 2852 ferrule face, 16 ga wall, 3 mm closed end with a 1.5 mm outer fillet (the weld); print closed end down"
  },
  {
   "name": "cup-3in-120-rod3",
   "step": "/files/hardware/tri-clamp-cups/cup-3in-120-rod3.step",
   "stl": "/files/hardware/tri-clamp-cups/cup-3in-120-rod3.stl",
   "note": "3 in closed-end spool \u00d7 120 with a \u00d83.2 centre hole in the end for a displacer rod or gland"
  }
 ]
}