{
 "object": "tri-clamp-heat-shield",
 "license": "CC BY 4.0, Xem Studio",
 "les": "https://longearthsociety.com/engineering/",
 "files": [
  {
   "name": "heat-shield-0.75in",
   "step": "/files/hardware/tri-clamp-clamps/heat-shield-0.75in.step",
   "stl": "/files/hardware/tri-clamp-clamps/heat-shield-0.75in.stl",
   "note": "0.75 in heat shield washer Ø50 OD (clamp OD + 16) × Ø25 bore (= flange OD) × 0.6: slides over a ferrule rim and rests on the hot-end clamp, shading the tube above the joint"
  },
  {
   "name": "heat-shield-1.5in",
   "step": "/files/hardware/tri-clamp-clamps/heat-shield-1.5in.step",
   "stl": "/files/hardware/tri-clamp-clamps/heat-shield-1.5in.stl",
   "note": "1.5 in heat shield washer Ø75.5 OD (clamp OD + 16) × Ø50.5 bore (= flange OD) × 0.6: slides over a ferrule rim and rests on the hot-end clamp, shading the tube above the joint"
  },
  {
   "name": "heat-shield-2in",
   "step": "/files/hardware/tri-clamp-clamps/heat-shield-2in.step",
   "stl": "/files/hardware/tri-clamp-clamps/heat-shield-2in.stl",
   "note": "2 in heat shield washer Ø89 OD (clamp OD + 16) × Ø64 bore (= flange OD) × 0.6: slides over a ferrule rim and rests on the hot-end clamp, shading the tube above the joint"
  },
  {
   "name": "heat-shield-2.5in",
   "step": "/files/hardware/tri-clamp-clamps/heat-shield-2.5in.step",
   "stl": "/files/hardware/tri-clamp-clamps/heat-shield-2.5in.stl",
   "note": "2.5 in heat shield washer Ø102.5 OD (clamp OD + 16) × Ø77.5 bore (= flange OD) × 0.6: slides over a ferrule rim and rests on the hot-end clamp, shading the tube above the joint"
  },
  {
   "name": "heat-shield-3in",
   "step": "/files/hardware/tri-clamp-clamps/heat-shield-3in.step",
   "stl": "/files/hardware/tri-clamp-clamps/heat-shield-3in.stl",
   "note": "3 in heat shield washer Ø116 OD (clamp OD + 16) × Ø91 bore (= flange OD) × 0.6: slides over a ferrule rim and rests on the hot-end clamp, shading the tube above the joint"
  },
  {
   "name": "heat-shield-4in",
   "step": "/files/hardware/tri-clamp-clamps/heat-shield-4in.step",
   "stl": "/files/hardware/tri-clamp-clamps/heat-shield-4in.stl",
   "note": "4 in heat shield washer Ø144 OD (clamp OD + 16) × Ø119 bore (= flange OD) × 0.6: slides over a ferrule rim and rests on the hot-end clamp, shading the tube above the joint"
  }
 ]
}