{
 "object": "tri-clamp-rd-tee-inserts",
 "license": "CC BY 4.0, Xem Studio",
 "les": "https://longearthsociety.com/engineering/",
 "files": [
  {
   "name": "rd-tee-insert-2in-ringbom",
   "step": "/files/hardware/tri-clamp-rd-tee-inserts/rd-tee-insert-2in-ringbom.step",
   "stl": "/files/hardware/tri-clamp-rd-tee-inserts/rd-tee-insert-2in-ringbom.stl",
   "note": "run insert Ø47.5 × 173.90 (between the two Type B lips of a 2 in equal tee): Ø18 × 6.85 axis cavity, Ø7 riser at x 17 to the branch axis (86.95 up) and out along +X, Ø10 × 4 counterbore for the branch insert's spigot, Ø45.3 spigot on top through the upper gasket's lip to 0.5 under the gland cap's recess floor, Ø9 rod way on the axis"
  },
  {
   "name": "rd-tee-insert-2in-gamma",
   "step": "/files/hardware/tri-clamp-rd-tee-inserts/rd-tee-insert-2in-gamma.step",
   "stl": "/files/hardware/tri-clamp-rd-tee-inserts/rd-tee-insert-2in-gamma.stl",
   "note": "run insert Ø47.5 × 173.90: as the Ringbom insert with no axis cavity and an Ø4 rod way"
  },
  {
   "name": "rd-branch-insert-2in",
   "step": "/files/hardware/tri-clamp-rd-tee-inserts/rd-branch-insert-2in.step",
   "stl": "/files/hardware/tri-clamp-rd-tee-inserts/rd-branch-insert-2in.stl",
   "note": "branch insert Ø47.5: saddle on the run bore to 88.4 from the run axis (0.5 short of the branch face plane), Ø10 × 4 spigot into the run insert, Ø8 passage on its axis"
  }
 ]
}