{
 "object": "tri-clamp-volume-filler",
 "license": "CC BY 4.0, Xem Studio",
 "les": "https://longearthsociety.com/engineering/",
 "files": [
  {
   "name": "plug-tee-2in-blind",
   "step": "/files/hardware/tri-clamp-volume-filler/plug-tee-2in-blind.step",
   "stl": "/files/hardware/tri-clamp-volume-filler/plug-tee-2in-blind.stl",
   "note": "2 in tee-run plug Ø47.5 × 173.9: Ø16 passage from one end to the centre, then Ø16 out to the branch; the other half solid"
  },
  {
   "name": "plug-tee-2in-rod-106.55",
   "step": "/files/hardware/tri-clamp-volume-filler/plug-tee-2in-rod-106.55.step",
   "stl": "/files/hardware/tri-clamp-volume-filler/plug-tee-2in-rod-106.55.stl",
   "note": "2 in tee-run plug Ø47.5 × 106.55: Ø12 passage end to end for the displacer rod and the gas, Ø16 out to the branch at 19.60 from the bottom"
  },
  {
   "name": "sleeve-2in-76.2",
   "step": "/files/hardware/tri-clamp-volume-filler/sleeve-2in-76.2.step",
   "stl": "/files/hardware/tri-clamp-volume-filler/sleeve-2in-76.2.stl",
   "note": "2 in annular sleeve Ø45.5 × 76.2 with three 3 mm ribs to Ø47.5: 1.0 mm gas gap along the tube wall (hot spool)"
  },
  {
   "name": "sleeve-2in-32",
   "step": "/files/hardware/tri-clamp-volume-filler/sleeve-2in-32.step",
   "stl": "/files/hardware/tri-clamp-volume-filler/sleeve-2in-32.stl",
   "note": "2 in annular sleeve Ø45.5 × 32 with three ribs to Ø47.5: 1.0 mm gas gap (cold spool, above the regenerator)"
  }
 ]
}