9090 aluminum extrusion, 10 mm slot (45-series) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/9090-aluminum-extrusion/ (CC BY 4.0) Basis: Misumi 8-45 series, 10 mm slot, from Misumi's dimensioned drawing of this profile; every slot, lip, cavity, bore and outline number is the drawing's Catalog version: 2026-10-20 Overall (mm): width 90.0, height 90.0 - 9090 aluminum extrusion, 10 mm slot (45-series): 90 × 90 mm, 8 slots on a 45 mm pitch (Misumi 8-45 series, 10 mm slot). Source: Misumi's dimensioned drawing of this profile. Files: STEP and STL at 100, 1000 mm with square ends, and a DXF of the exact cross-section (mm), the master to extrude to any length. The section is centred on the origin and extruded along +Z from z = 0. - Slot: opening 10 mm, lip 6 mm thick at the opening, cavity 20 mm wide under the lips, 13 mm from the face to the cavity floor. Centre bore Ø6.8 mm per cell (the M8 tap drill). - Cavity side walls: the drawing gives the cavity width (20 mm) and depths but not the web thickness, so the side walls run at 45° from the corner under each lip straight to the floor: the smallest cavity those numbers allow. The bar has at least the real metal there, and a part that fits this cavity fits the real one. - The closed hollows between cells are not fully dimensioned on the drawing, so they are drawn filled: the outline, slots and bores are exact, the bar is heavier than the real one. The closed corner pockets (9 mm, 2.5 mm in) are not fully dimensioned and are drawn filled. - Outer corners R3 (stated). - Wrapping it: to make a part that fits around the bar, subtract the 1000 mm file (or extrude the DXF) from your solid; the outline is the drawing's 90 × 90 mm with no allowance, so open the pocket by your process's socket fit (see Mating features). - Attachments: the 45-series (10 mm slot) T-nuts, end caps, feet, brackets, gussets, plates and slot covers are cut from these same numbers; the fit check (tools/asm_extrusion_fit.py) placed each one on this profile with zero overlap. feature size from outline 90 × 90 mm, R3 corners drawing slot pitch 45 mm drawing slot opening 10 mm drawing lip thickness at the opening 6 mm drawing cavity width under the lips 20 mm drawing face to cavity floor 13 mm drawing cavity depth under the lip (at the cavity wall) 7 mm drawing core between opposite floors 19 mm pitch − 2 × face-to-floor diagonal web not given (45° walls from the cavity corner) assumed minimum cavity centre bore Ø6.8 mm × 4 drawing cross-section area 2162 mm² maker's page mass 5.8 kg/m maker's page Ix / Iy 209.2 × 10⁴ / 209.2 × 10⁴ mm⁴ maker's page area of this model's section 6739.0 mm² computed from the DXF Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Misumi: 90x90 Aluminum Extrusion - 8-45 Series, Base 45: product page with the cross-section drawing and section properties — web — Misumi site terms [verify license at link] — https://us.misumi-ec.com/vona2/detail/110302692840/ - Misumi: 9090 dimensioned cross-section drawing — image — Misumi site terms [verify license at link] — https://us.misumi-ec.com/linked/item/10302692840/img/Picture10_new.jpg Free files (CC BY 4.0, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/9090-aluminum-extrusion/index.json API: https://xemstudio.com/api/geometry?object=9090-aluminum-extrusion