Aluminium beverage cans: 12 oz standard, 16 oz, 330/500 mL, sleek, slim, mini — dimension sheet
Source: Xem Studio, https://xemstudio.com/objects/beverage-cans/  (CC BY 4.0)
Basis: Can Manufacturers Institute / Ball 'can size' nomenclature (211 = 2 11/16 in body, 202 = 2 2/16 in end); heights typical of each format, ±1 mm by filler
Catalog version: 2026-10-20

Sizes: see table below
- 12 oz standard can: body Ø66.0 mm (211), 122.5 mm tall, 0.10 mm aluminium wall, 202 end with a Ø57.4 mm seam (the double-seam chime); dome in the base about 10 mm deep. Tall 16 oz is the same Ø66 at 157 mm.
- Sleek (204 body) cans are Ø58.0; slim (202 body) cans Ø53.3. The pull-tab end is 0.25 mm thick and the hardest part; the body cuts with scissors.
- Stirling use: the 12 oz can is the classic displacer cylinder (Ø66). Cut the top off below the chime, leaving 110 mm; the printed cap in the can-engine kit fits over the Ø66 body with a 0.3 mm clearance and carries the displacer guide. The base dome is the hot end: a tea light fits under it.
- Two cans: cut the base off a second can and slide it over the first (Ø66 over Ø66 doesn't fit; the body is pre-stretched, so use a slim can inside a standard one as a regenerator sleeve).

can  body_dia_mm  height_mm  seam_dia_mm  wall_mm
12 fl oz / 355 mL US standard  66.0  122.5  57.4  0.1
16 fl oz / 473 mL 'pint' tall  66.0  157.0  57.4  0.1
330 mL European standard  66.0  115.2  57.4  0.1
500 mL European tall  66.0  168.0  57.4  0.1
12 fl oz sleek  58.0  156.0  52.0  0.1
250 mL slim  53.3  134.0  50.0  0.1
7.5 fl oz mini  58.0  103.0  52.0  0.1

Files elsewhere (not hosted by Xem Studio; license as stated by the publisher):
- Wikipedia: Drink can — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Drink_can
- Ball Corporation: Beverage can sizes and specifications — web — Ball site terms [verify license at link] — https://www.ball.com/na/solutions/markets-capabilities/capabilities/beverage-cans
- Long Earth Society: Engine builds (videos and write-ups) — web, video — LES site — https://longearthsociety.com/engineering/

Free files (CC BY 4.0, Xem Studio; STEP + STL, 7 parts): https://xemstudio.com/files/hardware/beverage-cans/index.json
API: https://xemstudio.com/api/geometry?object=beverage-cans