# 3D printable bistable snap toggle: slider that clicks to either end, curved leaf springs (STL, STEP)

> Is there a 3D printable mechanism that snaps a slider to one of two positions and holds it there?

- Category: 3D printing › Snap fits & clips
- Kind: Hardware
- Basis: Bistable compliant mechanism: two pre-curved leaf springs give two stable slider positions with an energy peak between them (BYU compliant mechanisms research). Xem design.
- Page: https://xemstudio.com/objects/bistable-snap-toggle/ · JSON: https://xemstudio.com/api/geometry?object=bistable-snap-toggle · Plain text: https://xemstudio.com/objects/bistable-snap-toggle/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 136.5 | 60.0 | 7.25 |

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- The slider rests at either end. Pushing it toward the middle forces the boss between the two leaf springs, which bend outward; past centre they push it on to the other end with a click.
- Leaves are printed in their installed shape and drop over the posts by their end rings. The boss bends each leaf 2.4 mm (50 × 40) or 3.5 mm (75 × 60) at the middle.
- Print the leaves in PETG or nylon, 3 mm tall, flat on the bed; PLA leaves crack after repeated flexing. Frame, cover and slider in any material.
- 0.3 mm clearance is built in: slider in its slots, leaf rings on the posts, parts in the 3.6 mm cavity. Assemble with four M3 × 8 self-tapping screws through the cover into the posts.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| slider in end-wall slots | bar + 0.6 mm | frame slots | run | all |
| leaf end rings | post Ø5 + 0.6 mm | frame posts | run | all |
| screw holes | 2.5 mm pilot / 3.2 mm clearance | M3 self-tapping screw | designed | all |

## Sizes

| part | 50 × 40 size mm | 75 × 60 size mm | qty |
|---|---|---|---|
| frame | 50 × 40 × 5.6 | 75 × 60 × 5.6 | 1 |
| cover | 50 × 40 × 1.6 | 75 × 60 × 1.6 | 1 |
| slider (bar + boss) | 91 × 6 × 3, boss Ø12 | 136.5 × 9 × 3, boss Ø18 | 1 |
| leaf spring | 0.8 thick × 3 tall, 36 span, 8 sag | 0.98 thick × 3 tall, 54 span, 12 sag | 2 |
| slider travel | ±16.5 | ±24.75 | — |
| screws | M3 × 8 self-tapping | M3 × 8 self-tapping | 4 |

## Where the files are

- BYU Compliant Mechanisms Research Group: [Compliant Mechanisms Explained](https://compliantmechanisms.byu.edu/about-compliant-mechanisms) — web — Publisher's page; dimensions are facts
- BYU ScholarsArchive: [Jensen, B. D., Identification of Macro- and Micro-Compliant Mechanism Configurations Resulting in Bistable Behavior](https://scholarsarchive.byu.edu/etd/83) — web — Publisher's page; dimensions are facts

## Free STEP/STL (10 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/3d-printing/bistable-snap-toggle/index.json · license: https://xemstudio.com/files/3d-printing/bistable-snap-toggle/LICENSE.md

- toggle-50x40-frame: [STEP](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-frame.step) · [STL](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-frame.stl) — 50x40 mm: Base frame: 2 mm plate with sight window, perimeter wall with slider slots at both ends, four posts with 2.5 mm pilot holes for M3 self-tapping screws
- toggle-50x40-cover: [STEP](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-cover.step) · [STL](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-cover.stl) — 50x40 mm: Cover plate: same outline and window, four 3.2 mm screw clearance holes, 1.6 mm thick
- toggle-50x40-slider: [STEP](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-slider.step) · [STL](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-slider.stl) — 50x40 mm: Slider: flat bar with a round boss at its middle that squeezes past the leaf springs
- toggle-50x40-leaf: [STEP](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-leaf.step) · [STL](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-leaf.stl) — 50x40 mm: Leaf spring: thin arc from post to post with a ring at each end; PETG or nylon
- toggle-50x40-assembled: [STEP](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-assembled.step) · [STL](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-50x40-assembled.stl) — 50x40 mm: All parts in place, cover closed, slider resting at one end (each part its own solid)
- toggle-75x60-frame: [STEP](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-frame.step) · [STL](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-frame.stl) — 75x60 mm: Base frame: 2 mm plate with sight window, perimeter wall with slider slots at both ends, four posts with 2.5 mm pilot holes for M3 self-tapping screws
- toggle-75x60-cover: [STEP](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-cover.step) · [STL](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-cover.stl) — 75x60 mm: Cover plate: same outline and window, four 3.2 mm screw clearance holes, 1.6 mm thick
- toggle-75x60-slider: [STEP](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-slider.step) · [STL](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-slider.stl) — 75x60 mm: Slider: flat bar with a round boss at its middle that squeezes past the leaf springs
- toggle-75x60-leaf: [STEP](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-leaf.step) · [STL](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-leaf.stl) — 75x60 mm: Leaf spring: thin arc from post to post with a ring at each end; PETG or nylon
- toggle-75x60-assembled: [STEP](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-assembled.step) · [STL](https://xemstudio.com/files/3d-printing/bistable-snap-toggle/toggle-75x60-assembled.stl) — 75x60 mm: All parts in place, cover closed, slider resting at one end (each part its own solid)

## Questions

**What is a bistable mechanism?**

One with two resting positions and a hump of stored spring energy between them, so it snaps to one or the other and holds there without power.

**How does this toggle work?**

The slider's round boss must push two curved leaf springs apart to pass the middle. Before centre they push it back; past centre they push it on to the other end.

**What filament should the springs be?**

PETG or nylon. They bend every click; PLA leaves crack after a while.

**Can I make it snap harder or softer?**

Use the 75 × 60 size for a longer stroke, or scale leaf thickness: stiffness rises with thickness cubed.

**What can I use it for?**

Two-position latches, mode switches, detents, lid stays, fidget toys, or any slider that must stay put at its ends.

## Fits with

- [3D printable flat springs: serpentine zig-zag flexure, soft, medium and firm (STL, STEP)](https://xemstudio.com/objects/flat-serpentine-springs/)
- [3D printable snap-fit hooks and catches: cantilever latch, permanent or releasable, 4 sizes (STL, STEP)](https://xemstudio.com/objects/snap-fit-hooks-and-catches/)
- [Living hinge (flexure hinge)](https://xemstudio.com/objects/living-hinge/)
- [Print-in-place: push button with flexure return and click](https://xemstudio.com/objects/print-in-place-push-button-flexure/)
- [3D printable 45° wedge slider: converts up/down motion to left/right (cam slider, STL, STEP)](https://xemstudio.com/objects/wedge-motion-converter/)
- [Planar spiral flexure bearing leaves: Ø40 to Ø120, 3-arm and 2-arm, 0.5 and 2 mm](https://xemstudio.com/objects/spiral-flexure-bearing/)
