3D printable bistable snap toggle: slider that clicks to either end, curved leaf springs (STL, STEP) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/bistable-snap-toggle/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: Bistable compliant mechanism: two pre-curved leaf springs give two stable slider positions with an energy peak between them (BYU compliant mechanisms research). Xem design. Catalog version: 2026-10-20 Overall (mm): length 136.5, width 60.0, height 7.25 - The slider rests at either end. Pushing it toward the middle forces the boss between the two leaf springs, which bend outward; past centre they push it on to the other end with a click. - Leaves are printed in their installed shape and drop over the posts by their end rings. The boss bends each leaf 2.4 mm (50 × 40) or 3.5 mm (75 × 60) at the middle. - Print the leaves in PETG or nylon, 3 mm tall, flat on the bed; PLA leaves crack after repeated flexing. Frame, cover and slider in any material. - 0.3 mm clearance is built in: slider in its slots, leaf rings on the posts, parts in the 3.6 mm cavity. Assemble with four M3 × 8 self-tapping screws through the cover into the posts. part 50 × 40 size mm 75 × 60 size mm qty frame 50 × 40 × 5.6 75 × 60 × 5.6 1 cover 50 × 40 × 1.6 75 × 60 × 1.6 1 slider (bar + boss) 91 × 6 × 3, boss Ø12 136.5 × 9 × 3, boss Ø18 1 leaf spring 0.8 thick × 3 tall, 36 span, 8 sag 0.98 thick × 3 tall, 54 span, 12 sag 2 slider travel ±16.5 ±24.75 — screws M3 × 8 self-tapping M3 × 8 self-tapping 4 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - BYU Compliant Mechanisms Research Group: Compliant Mechanisms Explained — web — Publisher's page; dimensions are facts — https://compliantmechanisms.byu.edu/about-compliant-mechanisms - BYU ScholarsArchive: Jensen, B. D., Identification of Macro- and Micro-Compliant Mechanism Configurations Resulting in Bistable Behavior — web — Publisher's page; dimensions are facts — https://scholarsarchive.byu.edu/etd/83 Free files (Xem Studio Design License, Xem Studio; STEP + STL, 10 parts): https://xemstudio.com/files/3d-printing/bistable-snap-toggle/index.json API: https://xemstudio.com/api/geometry?object=bistable-snap-toggle