Metric cable glands M12–M63: thread, panel hole (EN 60423), cable range, height, key size + hole gauge — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/cable-glands-metric-thread/ (sheet CC BY 4.0) Basis: Lapp technical table T21 (EN 60423 and DIN 13 metric thread and hole), VIOX's standard nylon metric series (cable range, thread length, height, key size); hole gauge as a file, glands themselves numbers only Catalog version: 2026-10-20 Overall (mm): length 332.7, width 79.4, height 3.0 - Thread columns are Lapp's table T21: D1 is the thread outer diameter, D2 the core diameter, D3 the panel hole, printed in the table as, e.g., '12.3 –0.2' (the number shown with its tolerance symbol as printed). M12, M16, M20, M25, M32, M40, M50, M63, M75, M90, M110 are the EN 60423 series (screw connections to EN 50262); M18, M24, M30, M36, M45, M56, M72, M80, M105 are DIN 13 sizes (screw connections to DIN 89280). The hole gauge uses the printed D3 for M12–M63. - Cable range, thread length, height and key size are VIOX's standard nylon series, one vendor's numbers, so other makers (Lapp Skintop, Jacob, Heyco) differ. Key size is 'body / cap' (the hex on the thread body and the hex on the dome cap). VIOX's chart cites no standard for these and gives no panel hole for its metric glands; the hole shown here is Lapp's. - Thread lengths in the table are VIOX's. Lapp's metric gland dimensions (wrench size, length, clamping range per article) are in its catalogue pages that could not be read, and Jacob's PERFECT datasheet prints columns A, C, L, SW1, SW2, H without defining them, so neither is reproduced. - Also published in T21 but not drawn: installation space Ø A for each wrench size (e.g. SW 22 → Ø 25.0 mm), tightening torques (plastic M12 1.5 Nm to M63 16 Nm; metal M12 8 Nm to M63 20 Nm), and NPT hole sizes. - PG glands are on the page cable-glands-pg-thread. McMaster-Carr's cord-grip and cable-gland pages (M12, M32, M40 and PG sizes appear in its thread-size URLs) carry per-part STEP; linked, not copied. thread standard thread OD D1 (mm) core D2 (mm) panel hole D3 (mm, Lapp) VIOX model cable range (mm) thread length (mm) height (mm) key size body / cap (mm) M12 × 1.5 EN 60423 12 10.6 12.3 (–0.2) 1001-M1265 3–6.5 8.5 26 18/15 M12 × 1.5 EN 60423 12 10.6 12.3 (–0.2) 1001-M1208 4–8 8.5 26 18/19 M16 × 1.5 EN 60423 16 14.6 16.3 (–0.2) 1001-M1607 3–7 10 29 22/19 M16 × 1.5 EN 60423 16 14.6 16.3 (–0.2) 1001-M1608 4–8 10 29 22/19 M16 × 1.5 EN 60423 16 14.6 16.3 (–0.2) 1001-M1610 5–10 10 30 22/22 M20 × 1.5 EN 60423 20 18.6 20.3 (–0.2) 1001-M2010 5–10 11 34 27/27 M20 × 1.5 EN 60423 20 18.6 20.3 (–0.2) 1001-M2012 6–12 10.5 30 27/24 M20 × 1.5 EN 60423 20 18.6 20.3 (–0.2) 1001-M2014 10–14 11 34 27/27 M25 × 1.5 EN 60423 25 23.6 25.3 (–0.2) 1001-M2513 7–13 12 36 33/33 M25 × 1.5 EN 60423 25 23.6 25.3 (–0.2) 1001-M2514 10–14 11 34 33/27 M25 × 1.5 EN 60423 25 23.6 25.3 (–0.2) 1001-M2518 13–18 12 36 33/33 M32 × 1.5 EN 60423 32 30.6 32.3 (–0.2) 1001-M3218 13–18 15 42 41/41 M32 × 1.5 EN 60423 32 30.6 32.3 (–0.2) 1001-M3225 18–25 15 42 41/41 M40 × 1.5 EN 60423 40 38.6 40.4 (–0.3) 1001-M4025 18–25 15 46 50/52 M40 × 1.5 EN 60423 40 38.6 40.4 (–0.3) 1001-M4031 22–31 15 46 50/52 M50 × 1.5 EN 60423 50 48.6 50.4 (–0.3) 1001-M5028 22–28 16 54 62/62 M50 × 1.5 EN 60423 50 48.6 50.4 (–0.3) 1001-M5041 31–41 16 54 62/62 M63 × 1.5 EN 60423 63 61.6 63.4 (–0.3) 1001-M6338 29–38 18 56 75/65 M63 × 1.5 EN 60423 63 61.6 63.4 (–0.3) 1001-M6345 35–45 18 56 75/65 M18 × 1.5 DIN 13 18 16.4 18.3 (–0.2) — — — — — M24 × 1.5 DIN 13 24 22.4 24.3 (–0.2) — — — — — M30 × 2 DIN 13 30 27.8 30.3 (–0.2) — — — — — M36 × 2 DIN 13 36 33.8 36.3 (–0.2) — — — — — M45 × 2 DIN 13 45 42.8 45.4 (–0.3) — — — — — M56 × 2 DIN 13 56 53.8 56.4 (–0.3) — — — — — M72 × 2 DIN 13 72 69.8 72.5 (–0.4) — — — — — M80 × 2 DIN 13 80 77.8 80.5 (–0.4) — — — — — M105 × 2 DIN 13 105 102.8 105.5 (–0.4) — — — — — M75 × 1.5 EN 60423 75 73.6 75.4 (–0.3) — — — — — M90 × 2 EN 60423 90 88.8 90.4 (–0.3) — — — — — M110 × 2 EN 60423 110 108.8 110.4 (–0.3) — — — — — Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Lapp: Technical table T21: thread dimensions for cable glands (metric EN 60423 / DIN 13, PG DIN 40430, NPT), tightening torques and installation dimensions; D1 outer diameter, pitch, D2 core diameter, D3 hole diameter — web — Maker technical table, hosted by a distributor; numbers only — https://www.sos.sk/docs/1/1937/T21 Thread dimensions for cable glands_Tightening torques and installation dimensions for cable glands.pdf - VIOX: Cable gland size chart: standard nylon metric series (cable range, thread length, height, key size) and brass PG series — web — Vendor chart; the vendor states hole sizes are for its own series — https://viox.com/fr/cable-gland-size-chart/ - McMaster-Carr: Cord grips and cable glands (free STEP/IGES per part, for your own design use; no redistribution) — STEP, IGES, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/cord-grips/ Free files (CC BY 4.0, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/cable-glands-metric-thread/index.json API: https://xemstudio.com/api/geometry?object=cable-glands-metric-thread