Camber link length and position (RC) — dimension sheet
Source: Xem Studio, https://xemstudio.com/objects/camber-link-length/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)
Basis: Design rules and figures from the cited sources; example geometry by Xem Studio
Catalog version: 2026-10-20

Sizes: see table below
- The camber link is the RC car's upper arm. Its length sets how fast camber changes with suspension travel, and its end positions set the roll centre (Tekno).
- A shorter link gives more camber gain, more corner-entry steering and traction but less stability; a longer link gives less camber gain and more stability (Tekno). Lowering the inboard end or raising the outboard end increases chassis roll (CompetitionX).
- The file is a reference example built by Xem Studio from the numbers above (Reference 1/10 touring car: wheelbase 260 mm (AARCMCC ISTC 250-270), track 190 mm (EFRA width without body), 50 mm = EFRA rim limit.). Sizes the sources do not fix are illustrative; scale the example to your own vehicle.

parameter  value or range  source
Shorter link  more camber gain and steering, less stable  Tekno setup guide
Longer link  less camber gain, more stable  Tekno setup guide
Inboard lower / outboard higher  more chassis roll  CompetitionX quick guide

Files elsewhere (not hosted by Xem Studio; license as stated by the publisher):
- Tekno RC: Tekno RC Setup Guide — web — Publisher's page; dimensions are facts — https://teknoforums.com/misc/Tekno-RC-Setup-Guide.pdf
- CompetitionX: RC Quick Setup Guide — web — Publisher's page; dimensions are facts — https://www.competitionx.com/?p=129

Free files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/camber-link-length/index.json
API: https://xemstudio.com/api/geometry?object=camber-link-length