Camber angle — dimension sheet
Source: Xem Studio, https://xemstudio.com/objects/camber/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)
Basis: Design rules and figures from the cited sources; example geometry by Xem Studio
Catalog version: 2026-10-20

Sizes: see table below
- Camber is the wheel's lean from vertical seen from the front: negative when the top leans in (Suspension Secrets). Negative camber keeps the tyre flatter on the road when the car rolls, so more negative camber gives more cornering grip (Tekno).
- The trade-off is straight-line grip and tyre wear: less camber improves acceleration grip and tyre life but lowers maximum cornering speed (EuroRC). Tekno suggests setting front camber so tyres wear flat and rear so they wear slightly more on the inside.
- Camber also creates camber thrust, which a small toe setting can cancel to reduce wear (Wikipedia, Toe).
- The file is a reference example built by Xem Studio from the numbers above (Reference 1/10 touring car: wheelbase 260 mm (AARCMCC ISTC 250-270), track 190 mm (EFRA width without body), 50 mm = EFRA rim limit.). Sizes the sources do not fix are illustrative; scale the example to your own vehicle.

parameter  value or range  source
1/10 touring camber  1-2 deg front, 1.5-2.5 deg rear (negative)  EuroRC set-up guide
1/10 buggy camber  2-3 deg front, 2-3.5 deg rear (negative)  EuroRC set-up guide
Front camber target  set so tyres wear flat; more caster needs more camber  Tekno setup guide
Rear camber target  slightly more wear on inside edge  Tekno setup guide

Files elsewhere (not hosted by Xem Studio; license as stated by the publisher):
- Suspension Secrets: Suspension geometry explained — web — Publisher's page; dimensions are facts — https://suspensionsecrets.co.uk/suspension-geometry-explained
- Tekno RC: Tekno RC Setup Guide — web — Publisher's page; dimensions are facts — https://teknoforums.com/misc/Tekno-RC-Setup-Guide.pdf
- EuroRC: Short set-up guide — web — Publisher's page; dimensions are facts — https://www.eurorc.com/page/135/short-set-up-guide
- Wikipedia: Toe (automotive) — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Toe_(automotive)

Free files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/camber/index.json
API: https://xemstudio.com/api/geometry?object=camber