DFRobot Gravity IO Shield for FireBeetle 2 (DFR0762): 25.4 × 60 mm board and 4 mounting holes — dimension sheet
Source: Xem Studio, https://xemstudio.com/objects/dfrobot-firebeetle-2-io-shield-dfr0762/  (sheet CC BY 4.0)
Basis: DFRobot's DFR0762 FireBeetle 2 IO expansion shield dimension drawing v1.0.
Catalog version: 2026-10-20

Overall (mm): length 60.0, width 25.4, height 1.6
- Board 60.0 × 25.4, 1.6 thick, centred; the FFC/GDI connector end and the VIN/GND terminal end are the two short edges.
- Four Ø2.0 mounting holes at (±11.0, ±28.3) from the board centre: 22.0 apart across, 56.6 apart along, 1.70 in from each short edge.
- The hole pattern matches the FireBeetle 2 board the shield stacks on.
- Modelled: board outline and holes. Not modelled: VIN/GND screw terminal, GDI FFC connector, Gravity pin headers and stacking headers.
- All dimensions are exact nominal millimetres, true size, with no tolerance added.

hole  x (mm)  y (mm)  diameter (mm)
1  -11.0  -28.3  2.0
2  +11.0  -28.3  2.0
3  -11.0  +28.3  2.0
4  +11.0  +28.3  2.0

Files elsewhere (not hosted by Xem Studio; license as stated by the publisher):
- DFRobot: Gravity: IO Shield for FireBeetle 2 (ESP32-E/M0) — web — Publisher's page; dimensions are facts — https://www.dfrobot.com/product-2395.html
- Mouser Electronics: DFRobot Gravity IO Shield for FireBeetle M0 & ESP32-E product overview (PDF) — web — Publisher's page; dimensions are facts — https://www.mouser.lt/pdfDocs/ProductOverview_DFRobot-Gravity-IO-Shield-FireBeetle-M0-ESP32-E.pdf

Free files (CC BY 4.0, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/dfrobot-firebeetle-2-io-shield-dfr0762/index.json
API: https://xemstudio.com/api/geometry?object=dfrobot-firebeetle-2-io-shield-dfr0762