Ø10 mm drill-in push-to-open latches (Haefele K Push Tech, DTC, Titus): bore, throw, part numbers — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/drill-in-push-to-open-latches/ (sheet CC BY 4.0) Basis: Haefele catalogue page 10.127 and maker product pages (text values). The plate and housing outlines are not printed in words, so no file Catalog version: 2026-10-20 Sizes: see table below - The common round push latch is a plastic barrel pressed or glued into a Ø10 mm hole drilled in the cabinet side or divider, with a spring plunger that kicks the door open. A magnet head catches a steel plate on a free-swinging door; a rubber-buffer head pushes a door on a self-closing (sprung) hinge. Blum TIP-ON uses the same Ø10 hole (see its page). - Throw (plunger travel) is 14 mm on the short barrel and 37 mm on the long: Haefele K Push Tech states 14 / 37 mm with a 50 mm (short) or 70 mm (long) hole; DTC / Marathon state 18 mm throw in a 50 mm hole; Titus states 14 mm in a 50 mm hole and +4 / 0 mm depth adjustment by screw. - Product sizes printed in words: DTC barrel Ø9.8 × 52.2 mm (magnet) and Ø9.8 × 52.8 mm (bumper); Titus short barrel 9.8 mm square section by 47 mm. The Haefele drawing prints further numbers (for the surface-mount housing and mounting plates) without naming them, so they are left out. - Strike plate: the magnet versions need a steel plate on the door; the maker pages here print no plate size or hole positions (Haefele lists a self-adhesive strike plate 356.01.539 and a knock-in plate 246.15.990). Plan the door gap with the throw: the latch only works if the closed door sits within the plunger travel. - Dimension data from distributors is marked 'not binding' by Haefele; measure your own latch before cutting expensive parts. - No file: the makers' text pages print the body, flange, plunger and strike-plate drawing numbers without naming the feature each one measures, and the outline is not stated in words, so nothing is drawn. A plain cylinder for the bore would not be the part. family / part hole (Ø × depth) throw other numbers Haefele K Push Tech short, magnet 356.12.700 (white) / 356.12.300 (anthracite) Ø10 × 50 mm 14 mm buffer 356.12.710 / .310; housing 356.12.720 / .320; mounting plate 356.12.725 / .325 Haefele K Push Tech long, magnet 356.12.705 / .305 Ø10 × 70 mm 37 mm strong magnet 356.12.706 / .306; buffer 356.12.717 / .317; strong buffer 356.12.718 / .318; housing 356.12.722 / .322; plate 356.12.723 / .323 Haefele installation tool — — 356.12.099 DTC / Marathon 105-MSA01 (magnetic, 18 mm) Ø10 × 50 mm 18 mm barrel Ø9.8 × 52.2 mm; free-swinging hinges DTC / Marathon 105-MSA02 (bumper, 18 mm) Ø10 × 50 mm 18 mm barrel Ø9.8 × 52.8 mm; soft-close or self-closing hinges Titus Tekform short, magnet 915.7185.383.00 Ø10 × 50 mm 14 mm 9.8 mm section, 47 mm long; depth adjustment +4 / 0 mm Riex NK55 push-to-open FWF003034 / FWF007586 Ø10 × 38 mm — magnet; throw not stated on the listing Blum TIP-ON short / long (own page) Ø10 × 50 / 76 mm 17 / 38 mm 7.5 mm from the cabinet inside face Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Haefele (catalogue page 10.127, via AB Supply): K Push Tech concealed push-to-open latches 356.12.xxx: throw, hole, part numbers — web — Publisher's page; dimensions are facts — https://s3.amazonaws.com/s3-absupply-net/pdf/hafele/356-12-725-locks-and-catches-s10-127.pdf - Haefele (via Home Decor Hardware): 356.12.317 Latch, K Push Tech concealed, long, with buffer: 37 mm trigger — web — Publisher's page; dimensions are facts — https://store.homedecorhardware.com/hf-356-12-317.html - Marathon Hardware (DTC): 105-MSA01 push latch with magnetic, 18 mm: drilling, product size, open length — web — Publisher's page; dimensions are facts — https://marathonhardware.com/pd/push-latch-with-magnetic-18mm-single/105-MSA01 - Marathon Hardware (DTC): 105-MSA02 push latch with bumper, 18 mm: drilling, product size, open length — web — Publisher's page; dimensions are facts — https://marathonhardware.com/pd/push-latch-with-bumper-18mm-single/105-MSA02 - Titus Tekform: Short push open with magnet, grey (915.7185.383.00): hole, depth, stroke, length — web — Publisher's page; dimensions are facts — https://www.titustekform.com.au/shop/hinges-and-dampers/push-to-open/short-push-open-with-magnet-grey - Hranipex (Riex): Riex NK55 push to open for drilling 10 mm x 38 mm, with magnet (FWF003034, FWF007586) — web — Publisher's page; dimensions are facts — https://www.hranipex.com/en/product/riex-nk55-push-to-open-for-drilling-10-mm-38-mm-with-magnet-white-fwf007586 No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned. API: https://xemstudio.com/api/geometry?object=drill-in-push-to-open-latches