Lifting eye nuts, DIN 582, M6–M100x6: ring, collar, height and thread — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/eye-nuts-din-582/ (sheet CC BY 4.0) Basis: fasten.it's DIN 582 table (2018 edition, 25 sizes M6 to M100x6), with Ganter's DIN 582 datasheet as a cross-check of d2 and d3; numbers only. Load values are left out on purpose Catalog version: 2026-10-20 Sizes: see table below - All values are mm in the fasten.it 2018 table (it replaces the 09/2010 edition, which that page marks as superseded). Columns are the page's own symbols in the order printed: d1 thread, d2, d3, d4, e, h, k, m, r (≈). The page does not define the letters in text (its drawing is an image), so none is interpreted here; read them against the DIN 582 drawing. - Ganter's DIN 582 datasheet (steel, M6 to M36; stainless M6 to M24) agrees with the table for d2 and d3 at M6, M8, M10, M12, M16, M20, M24, M30 and M36 (20 / 36, 20 / 36, 25 / 45, 30 / 54, 35 / 63, 40 / 72, 50 / 90, 65 / 108, 75 / 126). Ganter notes that the official sheet also lists M42, M48, M56, M64, M72x6, M80x6 and M100x6, which matches the rows above. The odd sizes (M14, M18, M22, M27, M33, M39, M45, M52, M60) are in the fasten.it table only. - Load ratings (Ganter prints three load columns F1, F2, F3 without defining them) are left out: they depend on the load direction and are not safe to quote from a table without the standard. Ganter's note says the eye nut must be fully screwed in, both threads must be of equal length, and the mating material must be at least as strong as the nut. - Related: the stud-type lifting eye bolt (DIN 580) is eye-bolts-din-580, and the inch shoulder eye bolt is shoulder-eye-bolts-inch. - No file: the section of the ring and collar is not given as numbers in the sources read, so a drawing would be invented. McMaster-Carr sells eye nuts for lifting with per-part STEP; linked, not copied. d1 (thread) d2 d3 d4 e h k m r ≈ M6 20 36 20 8.5 36 8 10 4 M8 20 36 20 8.5 36 8 10 4 M10 25 45 25 10 45 10 12 4 M12 30 54 30 11 53 12 14 6 M14 35 63 35 13 62 14 16 6 M16 35 63 35 13 62 14 16 6 M18 40 72 40 16 71 16 19 8 M20 40 72 40 16 71 16 19 8 M22 50 90 50 20 90 20 24 12 M24 50 90 50 20 90 20 24 12 M27 65 108 60 25 109 24 28 15 M30 65 108 60 25 109 24 28 15 M33 75 126 70 30 128 28 32 18 M36 75 126 70 30 128 28 32 18 M39 85 144 80 35 147 32 38 20 M42 85 144 80 35 147 32 38 20 M45 100 166 90 40 168 38 46 22 M48 100 166 90 40 168 38 46 22 M52 110 184 100 45 187 42 50 25 M56 110 184 100 45 187 42 50 25 M60 120 206 110 50 208 48 58 25 M64 120 206 110 50 208 48 58 25 M72x6 150 260 140 60 260 60 72 35 M80x6 170 296 160 70 298 68 80 35 M100x6 190 330 180 80 330 75 88 40 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - fasten.it: DIN 582 Standard Dimensions for lifting eye nuts, 2018 edition (replaces 09/2010): d1 (thread), d2, d3, d4, e, h, k, m, r≈, M6 to M100x6 — web — Reference page; numbers only. The page does not define the column letters (its drawing is an image) — https://fasten.it/Norms/Norm/DIN_582 - Elesa+Ganter: DIN 582 eye nuts, steel (ST) and stainless (NI / A4): d2, d3 and load columns M6 to M36 (steel) / M6 to M24 (stainless); cross-check of d2 and d3 — web — Maker datasheet; numbers only — https://www.elesa-ganter.in/siteassets/PDF/EN/DIN 582.pdf - McMaster-Carr: Eye nuts for lifting (DIN 582 listing) (free STEP/IGES per part, for your own design use; no redistribution) — STEP, IGES, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/eye-nuts/specifications-met~din-582 - McMaster-Carr: Eye nuts, lifting (free STEP/IGES per part, for your own design use; no redistribution) — STEP, IGES, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/eyebolts/eye-nuts-for-lifting/ No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned. API: https://xemstudio.com/api/geometry?object=eye-nuts-din-582