Furring hat channel, 7/8 in and 1-1/2 in (SSMA 087F125 / 150F125): depth, face, flanges, thickness — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/furring-hat-channels-ssma/ (sheet CC BY 4.0) Basis: SFIA Technical Guide for Cold-Formed Steel Framing Products (Jan 2026): (Hat) Furring (F) channel table 087F125 / 150F125, 18 to 43 mil, and thickness table; ClarkDietrich 087F125-43 submittal (0.875 in depth, 1.250 in face, 0.168 in², 16 ga 54 mil also sold); CEMCO 'F' furring channel data (7/8 in height, 1/2 in flanges) Catalog version: 2026-10-20 Overall (mm): length 200.0 - Designation 087F125-MM: 087 = 0.875 in (7/8) depth, F = furring (hat) channel, 125 = 1-1/4 in face, MM = minimum thickness in mils; 150F125 is the 1-1/2 in deep version. Flanges are 1/2 in (CEMCO). Sold to ASTM C645 / AISI S220 (nonstructural). - Drawn with vertical webs and out-to-out legs (overall width 2-1/4 in less 2t). Real rolls flare the webs slightly, so the drawn areas run about 1.5 to 2 % under SFIA's published gross areas (087F125-43: 0.165 drawn, 0.168 published; 150F125-43: 0.221 vs 0.225). The flare angle is not published. - Inside radius per the SFIA thickness table. Cross-section shown as a 200 mm length; no knurled face, no hemmed legs (ClarkDietrich sells a 25 ga hemmed-leg version). - A metric omega-profile table (EN 14195) was not found in a free source and is not included. designation depth in face in flange in overall in mils ref. gauge design t in inside R in depth mm face mm t mm SFIA area in² 087F125-18 0.875 1.25 0.5 2.212 18 25 0.0188 0.0844 22.22 31.75 0.478 0.072 087F125-27 0.875 1.25 0.5 2.193 27 22 0.0283 0.0796 22.22 31.75 0.719 0.107 087F125-30 0.875 1.25 0.5 2.188 30 20 drywall 0.0312 0.0782 22.22 31.75 0.792 0.118 087F125-33 0.875 1.25 0.5 2.181 33 20 structural 0.0346 0.0765 22.22 31.75 0.879 0.130 087F125-43 0.875 1.25 0.5 2.160 43 18 0.0451 0.0712 22.22 31.75 1.146 0.168 087F125-54 0.875 1.25 0.5 2.137 54 16 0.0566 0.0849 22.22 31.75 1.438 - (ClarkDietrich only) 150F125-18 1.5 1.25 0.5 2.212 18 25 0.0188 0.0844 38.10 31.75 0.478 0.095 150F125-27 1.5 1.25 0.5 2.193 27 22 0.0283 0.0796 38.10 31.75 0.719 0.143 150F125-30 1.5 1.25 0.5 2.188 30 20 drywall 0.0312 0.0782 38.10 31.75 0.792 0.157 150F125-33 1.5 1.25 0.5 2.181 33 20 structural 0.0346 0.0765 38.10 31.75 0.879 0.174 150F125-43 1.5 1.25 0.5 2.160 43 18 0.0451 0.0712 38.10 31.75 1.146 0.225 150F125-54 1.5 1.25 0.5 2.137 54 16 0.0566 0.0849 38.10 31.75 1.438 - (ClarkDietrich only) Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Steel Framing Industry Association (SFIA): Technical Guide for Cold-Formed Steel Framing Products (2026): (Hat) Furring (F) channel properties and thickness table — web — Publisher's page; dimensions are facts — https://sfia.memberclicks.net/assets/Library/TechnicalCatalog/SFIA-technical-product-guide_FINAL_20260107.pdf - ClarkDietrich: 7/8 in Furring / Hat Channel 087F125-43 submittal: depth 0.875 in, width 1.250 in — web — Publisher's page; dimensions are facts — https://www.itools.clarkdietrich.com/submittalpro/dyn_pdf/%7b%22pdf_type%22:%22individual_product%22,%22project_product_code%22:%22product%7cf_furring~product_code%7c087F125-43%22%7d/087F125-43.pdf - CEMCO: 'F' furring channel: 7/8 in height, 1/2 in flanges, 087F125-18 — web — Publisher's page; dimensions are facts — https://www.buildsite.com/pdf/cemco/F-Hat-Shaped-Furring-Channel-Product-Data-2213966.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 6 parts): https://xemstudio.com/files/hardware/furring-hat-channels-ssma/index.json API: https://xemstudio.com/api/geometry?object=furring-hat-channels-ssma