# 3D printable gear-sector amplifier: 6:1 sector-and-pinion pointer mechanism (STL, STEP)

> How do I amplify a small rotation with a gear sector and pinion?

- Category: Mechanisms › Gears
- Kind: Hardware
- Basis: Gear-sector amplifier: designed for 3D printing, exact nominal mm.
- Page: https://xemstudio.com/objects/gear-sector-amplifier/ · JSON: https://xemstudio.com/api/geometry?object=gear-sector-amplifier · Plain text: https://xemstudio.com/objects/gear-sector-amplifier/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 159.3 | 92.0 | 12.2 |

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: sector-amp-assembled.
- Resize: Gears scale by the module m (pitch Ø = m·z, centre distance = m·(z₁ + z₂)/2): keep the tooth counts so the ratio stays, and choose a standard module (0.5, 0.8, 1, 1.25, 1.5, 2, 2.5, 3).
- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.
- Ratio 72:12 = 6:1; centre distance 63.3 (63 nominal + 0.3 backlash).
- Sector teeth span 50 degrees; stop pins limit the lever to about ±12 degrees so it never runs out of mesh.
- Pointer keys on the pinion's 8 mm square boss (8.4 mm hole).
- Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| mesh | module 1.5, 72:12 | sector and pinion | designed | gears* |
| pointer | 8.4 square hole | 8 square boss | slide | pointer* |

## Sizes

| file | what | overall mm |
|---|---|---|
| sector-amp-assembled | assembled: 4 parts in place | 159.3 × 92 × 12.2 |
| sector-amp-base | sector amp base | 159.3 × 92 × 12.2 |
| sector-amp-sector | sector amp sector | 97.497 × 46.908 × 5 |
| sector-amp-pinion | sector amp pinion | 20.979 × 20.979 × 9 |
| sector-amp-pointer | sector amp pointer | 47 × 14 × 2 |

## Where the files are

- Wikipedia: [Gear](https://en.wikipedia.org/wiki/Gear) — web — Publisher's page; dimensions are facts
- Wikipedia: [Indicator (distance amplifying instrument)](https://en.wikipedia.org/wiki/Indicator_(distance_amplifying_instrument)) — web — Publisher's page; dimensions are facts

## Free STEP/STL (5 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/mechanisms/gear-sector-amplifier/index.json · license: https://xemstudio.com/files/mechanisms/gear-sector-amplifier/LICENSE.md

- sector-amp-assembled: [STEP](https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-assembled.step) · [STL](https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-assembled.stl) — sector amp assembly
- sector-amp-base: [STEP](https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-base.step) · [STL](https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-base.stl) — sector amp base
- sector-amp-sector: [STEP](https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-sector.step) · [STL](https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-sector.stl) — sector amp sector
- sector-amp-pinion: [STEP](https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-pinion.step) · [STL](https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-pinion.stl) — sector amp pinion
- sector-amp-pointer: [STEP](https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-pointer.step) · [STL](https://xemstudio.com/files/mechanisms/gear-sector-amplifier/sector-amp-pointer.stl) — sector amp pointer

## Questions

**What is the ratio?**

6:1: sector 72-tooth pitch circle, pinion 12 teeth.

**Why a sector, not a full gear?**

Only a small arc of teeth is ever used, so the rest is cut away.

**Can I change the ratio?**

Yes, with a different pinion; keep centre distance = 1.5 × (72 + z) / 2 + 0.3.

## Fits with

- [3D printable spur gears and racks, module 2: 10–40 teeth involute gears and gear racks (STL, STEP)](https://xemstudio.com/objects/printable-spur-gears-and-racks-module-2/)
- [3D printable L-rod right-angle drive: gearless 90° elbow mechanism with sliding bent rods (STL, STEP)](https://xemstudio.com/objects/l-rod-right-angle-drive/)
