3D printable gear-sector amplifier: 6:1 sector-and-pinion pointer mechanism (STL, STEP) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/gear-sector-amplifier/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: Gear-sector amplifier: designed for 3D printing, exact nominal mm. Catalog version: 2026-10-20 Overall (mm): length 159.3, width 92.0, height 12.2 - Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: sector-amp-assembled. - Resize: Gears scale by the module m (pitch Ø = m·z, centre distance = m·(z₁ + z₂)/2): keep the tooth counts so the ratio stays, and choose a standard module (0.5, 0.8, 1, 1.25, 1.5, 2, 2.5, 3). - Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up. - Ratio 72:12 = 6:1; centre distance 63.3 (63 nominal + 0.3 backlash). - Sector teeth span 50 degrees; stop pins limit the lever to about ±12 degrees so it never runs out of mesh. - Pointer keys on the pinion's 8 mm square boss (8.4 mm hole). - Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid. file what overall mm sector-amp-assembled assembled: 4 parts in place 159.3 × 92 × 12.2 sector-amp-base sector amp base 159.3 × 92 × 12.2 sector-amp-sector sector amp sector 97.497 × 46.908 × 5 sector-amp-pinion sector amp pinion 20.979 × 20.979 × 9 sector-amp-pointer sector amp pointer 47 × 14 × 2 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Wikipedia: Gear — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Gear - Wikipedia: Indicator (distance amplifying instrument) — web — Publisher's page; dimensions are facts — https://en.wikipedia.org/wiki/Indicator_(distance_amplifying_instrument) Free files (Xem Studio Design License, Xem Studio; STEP + STL, 5 parts): https://xemstudio.com/files/mechanisms/gear-sector-amplifier/index.json API: https://xemstudio.com/api/geometry?object=gear-sector-amplifier