# GoPro-style three-finger mount

> What are the dimensions of a GoPro three-finger mount?

- Category: Hardware › Mounts
- Kind: Standard part
- Basis: de facto standard; community-measured values
- Page: https://xemstudio.com/objects/gopro-mount/ · JSON: https://xemstudio.com/api/geometry?object=gopro-mount · Plain text: https://xemstudio.com/objects/gopro-mount/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); linked files under their publishers' licenses

## Notes

- Each finger ~3 mm thick with ~3.3 mm gaps; three-finger side total ~15.4 mm; two-finger side mates between; Ø5.2 mm through-hole for an M5 thumbscrew; finger radius ~7.5 mm.
- Values are measured, not published by GoPro; print a test clip.

## Where the files are

- Printables (community): [GoPro mount models](https://www.printables.com/search/models?q=gopro%20mount) — STL, 3MF — varies per upload (verify at link)

## Questions

**What are GoPro mount finger dimensions?**

Fingers about 3 mm thick with 3.3 mm gaps; three-finger side about 15.4 mm total; Ø5.2 mm through-hole for an M5 thumbscrew.

**What screw does a GoPro mount use?**

M5 thumbscrew, about 20 mm long for a two-into-three finger joint.

## Fits with

- [Socket head cap screws, M2–M8 (ISO 4762 / DIN 912)](https://xemstudio.com/objects/socket-head-cap-screws-metric/)
- [Raspberry Pi Camera Module 3](https://xemstudio.com/objects/raspberry-pi-camera-module-3/)