# Burner stand for a 10 in tri-clamp pot

> How do I stand a 10 inch tri-clamp engine over a burner?

- Category: Stirling engines › Tri-clamp engine parts
- Kind: Hardware
- Basis: Exact geometry
- Page: https://xemstudio.com/objects/htd-burner-stand-10in/ · JSON: https://xemstudio.com/api/geometry?object=htd-burner-stand-10in · Plain text: https://xemstudio.com/objects/htd-burner-stand-10in/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); linked files under their publishers' licenses
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no printing tolerance. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your printer's or process's clearance before making the part.

## Notes

- The ring's top (201.53 above the bench) carries the 10 in clamp's underside; the cup hangs through it, its floor 150 (main) or 140.4 (pot) above the bench, which leaves the burner room under it. Three legs, each with an M5 hole for the optional shroud's tab.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| ring top | Ø264–Ø330 flat | underside of the 10 in clamp | designed | all |
| leg holes | Ø5.5 radial at z 170 | shcs-m5x20 (shroud tabs) | designed | all |

## Sizes

| ring_mm | legs | ring_top_mm |
|---|---|---|
| Ø264 / Ø330 × 8 | 3 × 30 × 10 | 201.53 |

## Where the files are

- Long Earth Society: [Engine builds](https://longearthsociety.com/engineering/) — web, video — LES site

## Free STEP/STL (1 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/htd-burner-stand-10in/index.json

- burner-stand-10in: [STEP](https://xemstudio.com/files/hardware/htd-burner-stand-10in/burner-stand-10in.step) · [STL](https://xemstudio.com/files/hardware/htd-burner-stand-10in/burner-stand-10in.stl) — burner stand: ring Ø264/Ø330 × 8 under the 10 in clamp, three legs r 150..160 × 30 at 90/210/330°, feet

## Questions

**What holds the engine?**

The clamp at the cup's top joint rests on the ring.

## Fits with

- [Build list: HTD engine, 10 in tri-clamp (high-temperature-differential flat engine)](https://xemstudio.com/objects/list-htd-10in/)
- [Burner shroud for a 10 in hot cup (optional)](https://xemstudio.com/objects/htd-burner-shroud-10in/)