Knurled nuts, DIN 466 (high) and DIN 467 (low): M1–M10 knurl diameter, collar, height — dimension sheet
Source: Xem Studio, https://xemstudio.com/objects/knurled-nuts-din-466-467/  (sheet CC BY 4.0)
Basis: fasten.it's DIN 466 and DIN 467 tables (both 08/2006, M1 to M10); numbers only
Catalog version: 2026-10-20

Sizes: see table below
- Columns (mm) as fasten.it prints them, without defining the letters: d thread; P pitch; dk nominal, read as the knurled head diameter (it is the largest diameter and runs 5.5 to 36 mm); ds nominal = max, read as the smaller diameter of the collar; h nominal = max, the height (high type DIN 466, low type DIN 467); k nominal = max. The two tables have identical dk, ds and k for every size and differ only in h (M6: 15 high, 6 low) and weight, so d, P, dk, ds and k are shared. These letter readings are not confirmed by the page, so check a maker drawing before relying on ds or k.
- Weights are kilograms per 1000 pieces for steel (7.85 kg/dm³), approximate: DIN 466 / DIN 467 shown. The standards cover M1 to M10 only (the page text says so for both).
- No file: the knurl pattern, the collar position and the thread relief are not published as numbers in the source read, so a drawing would be invented. DIN 464 knurled thumb screws (the male counterpart): knurled-thumb-screws-din-464. Wing nuts: wing-nuts-din-315-asme-b18-17.
- No McMaster-Carr category URL for knurled thumb nuts was returned by a web search, so none is linked.

thread  P (mm)  dk (knurl diameter)  ds  h (DIN 466 / DIN 467)  k  weight kg/1000 (466 / 467)
M1  0.25  5.5  2.8  3.5 (466) / 2 (467)  1.5  0.357 / 0.295
M1.2  0.25  6  3  4 (466) / 2 (467)  1.5  0.445 / 0.344
M1.4  0.3  7  3.5  4.7 (466) / 2.5 (467)  2  0.765 / 0.66
M1.6  0.35  7.5  3.8  5 (466) / 2.5 (467)  2  0.9 / 0.75
M2  0.4  9  4.5  5.3 (466) / 2.5 (467)  2  1.3 / 1.02
M2.5  0.45  11  5  6.5 (466) / 3 (467)  2.5  2.2 / 1.9
M3  0.5  12  6  7.5 (466) / 3 (467)  2.5  3 / 2.2
M4  0.7  16  8  9.5 (466) / 4 (467)  3.5  7.19 / 5.41
M5  0.8  20  10  11.5 (466) / 5 (467)  4  13 / 9.86
M6  1  24  12  15 (466) / 6 (467)  5  24 / 17.6
M8  1.25  30  16  18 (466) / 8 (467)  6  46 / 33.9
M10  1.5  36  20  23 (466) / 10 (467)  8  88 / 63.8

Files elsewhere (not hosted by Xem Studio; license as stated by the publisher):
- fasten.it: DIN 466 knurled nuts, high type, M1 to M10: d, P, dk, ds, h, k, weight (08/2006) — web — Reference page; numbers only. The page does not define the column letters — https://fasten.it/norms/norm/din_466
- fasten.it: DIN 467 low knurled nuts, M1 to M10: d, P, dk, ds, h, k, weight (08/2006) — web — Reference page; numbers only. The page does not define the column letters — https://fasten.it/norms/norm/din_467

No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned.
API: https://xemstudio.com/api/geometry?object=knurled-nuts-din-466-467