# 3D printable lever ratchet with two arc pawls and spiral return spring (STL, STEP)

> How do I build a lever-operated ratchet with a drive pawl and a holding pawl in a 3D print?

- Category: Mechanisms › Intermittent motion
- Kind: Hardware
- Basis: Lever ratchet with two arc pawls: designed for 3D printing, exact nominal mm.
- Page: https://xemstudio.com/objects/lever-ratchet-with-arc-pawls/ · JSON: https://xemstudio.com/api/geometry?object=lever-ratchet-with-arc-pawls · Plain text: https://xemstudio.com/objects/lever-ratchet-with-arc-pawls/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 132.0 | 95.0 | 14.9 |

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, stays the same: lever-ratchet-assembled; step to the nearest standard size (and redraw the hole or pocket it fits): lever-ratchet-spring.
- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.
- Wheel OD 50, 24 teeth (15 degree steps), 10.2 thick so it spans both pawl layers.
- Arc pawls: 1.4 mm strips sweeping 60 degrees at 0.5 mm outside the teeth, tooth just behind the radial face.
- Return spring: spiral spring OD 30 with a 15 mm lever on a 5 mm square post, pushing the lever arm.
- Kit: the base plate carries 5 mm pins (parts have 5.4 mm bores, 0.2 mm per side); every part prints flat on its own, and the assembled file shows them in place with 0.2 mm gaps, each part its own solid.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| wheel bore | Ø5.4 on Ø5 pin | base pin | run | wheel* |
| spring hub | 5.0 square hole | 4.6 square post | slide | spring* |

## Sizes

| file | what | overall mm |
|---|---|---|
| lever-ratchet-assembled | assembled: 4 parts in place | 132 × 95 × 14.9 |
| lever-ratchet-base | lever ratchet base | 132 × 95 × 14.9 |
| lever-ratchet-wheel | lever ratchet wheel | 50 × 50 × 10.2 |
| lever-ratchet-lever | lever ratchet lever | 114 × 68 × 5 |
| lever-ratchet-spring | lever ratchet spring | 47.5 × 30 × 5 |

## Where the files are

- Wikipedia: [Ratchet (device)](https://en.wikipedia.org/wiki/Ratchet_(device)) — web — Publisher's page; dimensions are facts
- Wikipedia: [Pawl](https://en.wikipedia.org/wiki/Pawl) — web — Publisher's page; dimensions are facts

## Free STEP/STL (5 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/index.json · license: https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/LICENSE.md

- lever-ratchet-assembled: [STEP](https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/lever-ratchet-assembled.step) · [STL](https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/lever-ratchet-assembled.stl) — lever ratchet assembly
- lever-ratchet-base: [STEP](https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/lever-ratchet-base.step) · [STL](https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/lever-ratchet-base.stl) — lever ratchet base
- lever-ratchet-wheel: [STEP](https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/lever-ratchet-wheel.step) · [STL](https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/lever-ratchet-wheel.stl) — lever ratchet wheel
- lever-ratchet-lever: [STEP](https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/lever-ratchet-lever.step) · [STL](https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/lever-ratchet-lever.stl) — lever ratchet lever
- lever-ratchet-spring: [STEP](https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/lever-ratchet-spring.step) · [STL](https://xemstudio.com/files/mechanisms/lever-ratchet-with-arc-pawls/lever-ratchet-spring.stl) — lever ratchet spring

## Questions

**Why two pawls?**

One drives the wheel forward with the lever, the other holds it while the lever springs back.

**How far does each stroke turn the wheel?**

One tooth (15 degrees) per tooth of lever travel.

**Do the pawls need springs?**

No, the arc strips are their own springs.

## Fits with

- [3D printable ratchet wheel and pawl: one-way sawtooth wheel, plain and spring pawl (STL, STEP)](https://xemstudio.com/objects/ratchet-wheel-and-pawl/)
- [3D printable spiral torsion springs: flat clock springs with square-key hub and lever version (STL, STEP)](https://xemstudio.com/objects/printable-spiral-torsion-springs/)
- [3D printable spring-lever star-wheel ratchet indexer: 8-step index wheel with printed leaf-spring lever (STL, STEP)](https://xemstudio.com/objects/star-wheel-ratchet-indexer/)
