P-clips and rubber-lined cable clamps (DIN 3016): cable diameter, hole, band width and thickness, PK-15 and PK-20 series — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/p-clips-cable-clamps-din-3016/ (sheet CC BY 4.0) Basis: HCL Fasteners PK-15 / PK-20 table (labelled A to F1; series constants as printed once), compared with Jubilee, Express Electrical and Accu Components ranges; numbers only Catalog version: 2026-10-20 Sizes: see table below - P-clips (P-clamps, Adel clips, rubber-lined cable clamps) hold a cable, hose or pipe to a surface with one screw through the tail; the rubber liner grips and protects. The HCL Fasteners table (it labels both series DIN 3016) is the only one read with labelled columns A to F1 for every size. A is the largest cable diameter, B the offset distance (as HCL labels it), C the hole, D the band width, E the rubber width, F the band thickness and F1 the clamping thickness. - The HCL sheet prints C, D, E, F and F1 once per series (merged cells), so those are carried down the whole series here: PK-15: hole 6.4, band 15, rubber 18; PK-20: hole 8.4, band 20, rubber 24, thickness 1.0 and F1 2.5. For PK-15 the sheet prints 0.6 / 1.6 for the first row and 0.8 / 1.8 from PK-15-15 on; the table assumes the change applies from size 15, which is how the text reads but is not drawn. Quantities and the 2.5 % tolerance note are in the PDF. Offset B steps are as printed, including the odd PK-20-45 (37.0) and PK-20-50 (37.5). - Other makers' ranges: Jubilee (band 12.7 mm, fastening M4/5 in zinc-plated mild steel or M6 in 304 stainless) lists bundle diameters as min to max: 4.5 to 6, 5.5 to 8, 7.5 to 10, 8.5 to 11, 9.5 to 12, 11.5 to 14, 12.5 to 15, 13.5 to 16, 14.5 to 17, 15.5 to 18, 16.5 to 19, 17.5 to 20, 18.5 to 21, 19.5 to 22, 20.5 to 23, 21.5 to 24, 24.5 to 27, 26.5 to 29, 27.5 to 30, 28.5 to 31, 29.5 to 32, 34.5 to 37, 39.5 to 42, 43.5 to 46 mm. Express Electrical's stainless EPC clips (sizes 5, 6, 8, 10, 13, 16, 21, 25, 29, 35, 40 mm) have a 6.6 mm hole, 12 mm band and 15 mm total width (the table's column labels are positional). Accu Components HHCP-20-12-A4: diameter 20, band width 12, fastening 6 mm, range 5 to 52 mm. So a 12 to 12.7 mm band with a 6.4 to 6.6 mm hole is the common small size, a 15 mm band with 6.4 mm hole the PK-15, a 20 mm band with 8.4 mm the PK-20. - Band widths and holes therefore depend on the series, not only on the cable size; check the series before drilling. Left out: files (the tail length and strap form are not published as numbers) and non-DIN clamp types (twin-wire clips, saddle clamps). HCL part max cable Ø A, mm offset B, mm hole Ø C, mm band width D, mm rubber width E, mm band thickness F, mm clamping thickness F1, mm PK-15-5 5 12.2 6.4 15 18 0.6 1.6 PK-15-6 6 12.7 6.4 15 18 0.6 1.6 PK-15-7 7 13.2 6.4 15 18 0.6 1.6 PK-15-8 8 13.7 6.4 15 18 0.6 1.6 PK-15-9 9 14.2 6.4 15 18 0.6 1.6 PK-15-10 10 14.7 6.4 15 18 0.6 1.6 PK-15-11 11 15.2 6.4 15 18 0.6 1.6 PK-15-12 12 15.7 6.4 15 18 0.6 1.6 PK-15-13 13 16.2 6.4 15 18 0.6 1.6 PK-15-14 14 16.7 6.4 15 18 0.6 1.6 PK-15-15 15 17.2 6.4 15 18 0.8 1.8 PK-15-16 16 17.7 6.4 15 18 0.8 1.8 PK-15-17 17 18.2 6.4 15 18 0.8 1.8 PK-15-18 18 18.7 6.4 15 18 0.8 1.8 PK-15-19 19 19.2 6.4 15 18 0.8 1.8 PK-15-20 20 19.7 6.4 15 18 0.8 1.8 PK-15-21 21 20.2 6.4 15 18 0.8 1.8 PK-15-22 22 20.7 6.4 15 18 0.8 1.8 PK-15-23 23 21.2 6.4 15 18 0.8 1.8 PK-15-24 24 21.7 6.4 15 18 0.8 1.8 PK-15-25 25 22.2 6.4 15 18 0.8 1.8 PK-15-26 26 22.7 6.4 15 18 0.8 1.8 PK-15-27 27 23.2 6.4 15 18 0.8 1.8 PK-15-28 28 23.7 6.4 15 18 0.8 1.8 PK-15-29 29 24.2 6.4 15 18 0.8 1.8 PK-15-30 30 24.7 6.4 15 18 0.8 1.8 PK-15-31 31 25.2 6.4 15 18 0.8 1.8 PK-15-32 32 25.7 6.4 15 18 0.8 1.8 PK-15-33 33 26.2 6.4 15 18 0.8 1.8 PK-15-34 34 26.7 6.4 15 18 0.8 1.8 PK-15-35 35 27.2 6.4 15 18 0.8 1.8 PK-15-40 40 29.7 6.4 15 18 0.8 1.8 PK-20-11 11 20 8.4 20 24 1 2.5 PK-20-12 12 20.5 8.4 20 24 1 2.5 PK-20-13 13 21 8.4 20 24 1 2.5 PK-20-15 15 22 8.4 20 24 1 2.5 PK-20-18 18 23.5 8.4 20 24 1 2.5 PK-20-20 20 24.5 8.4 20 24 1 2.5 PK-20-22 22 25.5 8.4 20 24 1 2.5 PK-20-25 25 27 8.4 20 24 1 2.5 PK-20-28 28 28.5 8.4 20 24 1 2.5 PK-20-30 30 29.5 8.4 20 24 1 2.5 PK-20-32 32 30.5 8.4 20 24 1 2.5 PK-20-35 35 32 8.4 20 24 1 2.5 PK-20-38 38 33.5 8.4 20 24 1 2.5 PK-20-40 40 34.5 8.4 20 24 1 2.5 PK-20-45 45 37 8.4 20 24 1 2.5 PK-20-50 50 37.5 8.4 20 24 1 2.5 PK-20-55 55 40 8.4 20 24 1 2.5 PK-20-60 60 42.5 8.4 20 24 1 2.5 PK-20-65 65 45 8.4 20 24 1 2.5 PK-20-70 70 47.5 8.4 20 24 1 2.5 PK-20-75 75 50 8.4 20 24 1 2.5 PK-20-80 80 52.5 8.4 20 24 1 2.5 PK-20-85 85 55 8.4 20 24 1 2.5 PK-20-90 90 57.5 8.4 20 24 1 2.5 PK-20-95 95 60 8.4 20 24 1 2.5 PK-20-100 100 62.5 8.4 20 24 1 2.5 PK-20-110 110 65 8.4 20 24 1 2.5 PK-20-120 120 67.5 8.4 20 24 1 2.5 PK-20-130 130 70 8.4 20 24 1 2.5 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - HCL Fasteners: Rubber-lined P-clips PK-15 and PK-20 (DIN 3016): max diameter A, offset B, hole C, band D, rubber width E, band thickness F, clamping thickness F1 — web — Publisher's page; dimensions are facts — https://secure.hclfasteners.myzen.co.uk/pdfs/PK-clip.pdf - Jubilee (Lit PDF): Jubilee P-clips: diameter min / max by part, band width 12.7, fastening M4/5 (mild steel) and M6 (304 stainless) — web — Publisher's page; dimensions are facts — https://d1g9f3g06ezg82.cloudfront.net/files/1394f160-cef2-438f-a7da-0fa20acc15ab/Lit-Jubilee-P-Clips.pdf - Express Electrical (PDF): EPC rubber-lined stainless P-clips: hole 6.6, bundle 5 to 40 mm (column labels positional) — web — Publisher's page; dimensions are facts — https://www.expresselectrical.co.uk/files//f4979a16-7077-4d4d-97d3-ade900fbd14b/EPCR%20SS304%20Rubber%20Lined%20P-Clips.pdf - Accu Components: HHCP-20-12-A4 P-clip DIN 3016: diameter 20, band width 12, fastening 6; range 5 to 52 mm — web — Publisher's page; dimensions are facts — https://accu-components.com/fr/clips-en-p/849647-HHCP-20-12-A4 - HellermannTyton: P-clip / cable clamp product pages (maker CAD and drawings) — web — Publisher's page; dimensions are facts — https://hellermanntyton.com/products/clips-clamps-and-plugs/moc8floc20-25/156-01614 No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned. API: https://xemstudio.com/api/geometry?object=p-clips-cable-clamps-din-3016